| Featured Products this Week . |
|
|
| Portable 1-Port Vector Network Analyzer from 85 MHz to 14 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The R140B from Copper Mountain Technologies is a 1-Port Vector Network Analyzer that operates from 85 MHz to 14 GHz. It supports linear, log and segment sweeps with up to 100,001 measurement points per sweep and a measurement time of 170 µs per point. This VNA has a dynamic range of 112 dB (85 – 4.8 GHz) and a directivity of 42 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Real-time Spectrum Analyzer from 100 kHz to 43.5 GHz | |
RF Spectrum Analyzer
from Signal Hound
|
| The SM435C from Signal Hound is a Real-time Spectrum Analyzer that operates from 100 kHz to 43.5 GHz. It has a dynamic range of 110 dB, a sweep speed of 1 THz/sec at 30kHz RBW (using Nuttall windowing), and an SSB phase noise of -138 dBc/Hz@100 kHz offset. This RTSA is designed for remotely-located accurate RF data analysis at the lowest cost possible and includes a 10 Gigabit Ethernet SFP+ port, enabling it to communicate with a PC over long distances using a fiber optic cable. |
| |
Download Datasheet
Product Details | |
|
|
|
| Front-End Module for 4G LTE/5G NR Smartphone Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58281-11 from Skyworks is a Front-End Module that covers 4G LTE and 5G NR bands. It has integrated PA blocks, input and output matching, a MIPI standard digital control block, single-ended filters, antenna and band select switches, and a low noise amplifier (LNA). This module has an enhanced architecture that covers multiple bands and meets the spectral linearity and EVM requirements of CP-OFDM and DFTS-OFDM modulations up to 256 QAM. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
| Sponsored by EMC Directory | | |
|
|
|
|
|
|
|
|
|
|
|
|
| 6 dB Directional Coupler from 0.6 to 1.2 GHz | |
Directional Coupler
from MECA
|
| The 715-06-0.900 from MECA is a Directional Coupler that operates from 0.6 to 1.2 GHz. This 6 dB coupler provides a directivity of more than 22 dB and has an insertion loss of 0.1 dB. It can handle a forward input power of 100 W, a reverse power of 10 W reverse) and has a VSWR of less than 1.20:1. This coupler is available in a RoHS compliant Aluminum housing that measures 4.46 x 1.50 x 0.86 inches with N-type (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3 dB, 90° Hybrid Coupler from 5 to 6.3 GHz | |
90 Degree Hybrid Coupler
from TTM Technologies
|
| The X4C55K1-03S from TTM Technologies is a 90° Hybrid Coupler that operates from 5 to 6.3 GHz. This 3 dB coupler can handle a CW input power of up to 10 W with an isolation of more than 23 dB. It has an insertion loss of less than 0.2 dB, an amplitude balance of less than ±0.3 dB, and a phase balance of less than ±4 degrees. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Resistive Power Divider MMIC from DC to 70 GHz | |
Power Divider
from Marki Microwave
|
| The MPDR-0070CSP2 from Marki Microwave is a 2-way Resistive Power Divider MMIC that operates from DC to 70 GHz. It has an insertion loss of less than 3 dB, an amplitude balance of ±1 dB, and a phase balance of ±10°. This in-phase power divider is fabricated using passive GaAs MMIC technology that allows the production of smaller devices and replaces larger form-factor circuit board constructions. |
| |
Download Datasheet
Product Details | |
|
|
|
| 500 W CW/Pulsed Solid State Power Amplifier from 2 to 6 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2026B-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 2 to 6 GHz in CW or Pulse modes. It delivers an output power of more than 500 W with a gain of over 57 dB. The amplifier has a class A/AB linear design and built-in protection circuits with extensive monitoring features. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Way Reactive Power Divider/Combiner from 0.5 to 8.4 GHz | |
Power Divider
from JFW Industries
|
| The 50PD-927 from JFW Industries is a 4-way Reactive Power Divider/Combiner that operates from 0.5 to 8.4 GHz. It can handle an input power of 10 W (as a divider) and 0.25 W (as a combiner) at each port. This power divider/combiner has an insertion loss of less than 2.3 dB and provides an isolation of more than 16 dB. It has amplitude tracking of ± 0.6 dB and a phase tracking of ±6°. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Portable Spectrum Recording System from 9 kHz to 8/18 GHz | |
RF Spectrum Recording and Playback System
from CRFS
|
| The RFeye® SenS Portable is a Lightweight I/Q Recorder for high-fidelity, long-duration RF recording and signal extraction from 9 kHz to 8/18 GHz. This recorder has a real-time bandwidth of 100 MHz and can store up to 12 hours of spectrum recordings in its internal 25.6 TB SSD. This recorder uses the DeepView software interface from CRFS that allows users to quickly find and extract the required signals. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 W High Power Amplifier from 2 to 18 GHz | |
RF Amplifier
from Quantic PMI (Planar Monolithics)
|
| The PA-2G18G-43-5-40-SFF from Quantic PMI is a High-Power Amplifier that operates from 2 to 18 GHz. This amplifier delivers a saturated output power of 10 W with a gain of more than 39 dB. It meets the MIL-STD-202 standard for humidity, shock, vibration, altitude, and temperature cycle and has an operating temperature range from -40°C to +85°C. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Radiation Tolerant 20 GHz SPDT Absorptive Switch for Space Applications | |
RF Switch
from Teledyne e2v HiRel Electronics
|
| The TDSW020A2T from Teledyne Defense Electronics is an Absorptive SPDT Switch that operates from DC to 20 GHz. It can handle an input power of up to 35 dBm, provides an isolation of more than 40 dB and has an insertion loss of less than 3 dB. This switch is fabricated on robust 0.15 µm InGaAs pHEMT technology. It is controlled using TTL-compatible voltage levels and requires DC supplies of +5V/-5V. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 8-Channel Direct, Non-Crossbar Switch Matrix from 10 MHz to 8 GHz | |
Switch Matrix
from Polaris
|
| The SW08-DP from Polaris is an 8-Channel Switch Matrix that operates from 0.01 to 8 GHz. It consists of 8 switching channels that can be expanded to 16 channels by connecting two SW08-DPs in a master/slave configuration. This matrix utilizes a direct, non-crossbar switching configuration and provides automatic routing between the channels with consistent signal paths to enable the automation of tests. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 W, 2-Way Power Divider from 10 to 65 GHz | |
Power Divider
from XMA Corporation
|
| The OS6790-6065-02 from XMA Corporation is a 2-Way Power Divider that operates from 10 to 65 GHz. It can handle an input power of 10 W, provides an isolation of more than 15 dB, and has an insertion loss of less than 4.5 dB. This 50-ohm power divider has an amplitude balance of ±1.5 dB and a phase balance of ±15°. |
| |
Download Datasheet
Product Details | |
|
|
|
| UHF RFID Inlays (Dry/Wet/Label) for Item-Level Retail Tagging | |
RFID Tag
from Avery Dennison
|
| The AD-130 U8 from Avery Dennison are UHF RFID Inlays that are designed for item-level retail tagging. They have a read distance of 5 feet with a handheld reader when single items are tagged and grouped according to package type. These inlays are equipped with a UCODE 8 ICs from NXP, with 128-bit EPC memory and a 48-bit unique serialized TID number. |
| |
Download Datasheet
Product Details | |
|
|
|
| Shrouded Yagi Antenna from 2.5 to 2.7 GHz | |
Base Station Antenna
from Amphenol Antenna Solutions
|
| The 7360016 from Amphenol Antenna Solutions is a Shrouded Yagi Antenna that operates from 2500 to 2700 MHz. This vertically/horizontally polarized antenna provides a gain of 17 dBi and has a VSWR of less than 1.3:1. It has a horizontal beamwidth from 23 to 27° and a vertical beamwidth from 24 to 30°. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 6 GHz, 7 Gbps Wi-Fi 6E Point-to-Multipoint Backhaul Radio for Dense Environment | |
Microwave Backhaul Radio Links
from Mimosa
|
| The A6 from Mimosa is a Point-to-Multipoint Backhaul Radio that operates from 5150 to 6425 MHz for Wi-Fi 6E applications. It supports 20, 40, 80, and 160 MHz channels, 8x8 multi-user MIMO, and delivers a data rate of up to 7 Gbps (UL/DL). This access point utilizes BPSK-1024QAM, OFDMA, and other PHY layer technologies to ensure sufficient AP capacity to handle large populations in dense urban/rural environments. |
| |
Download Datasheet
Product Details | |
|
