| New RF and Microwave Products this Week . |
|
|
| 12 dB Gain Block from 50 kHz to 50 GHz | |
RF Amplifier
from Mini Circuits
|
| The ZVA-503GX+ from Mini-Circuits is a Gain Block that operates from 50 kHz to 50 GHz. It provides a gain of up to 12.5 dB with a noise figure of less than 6.5 dB and has an output P1dB of 20 mW. This gain block requires a DC supply of 5 V and consumes less than 150 mA of current. It is available in a module that measures 21.27 x 24.38 x 9.52 mm with 2.4 mm connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| SOSA-Aligned Microwave Transceiver from 6 to 18 GHz for EW Applications | |
RF Transceiver
from Mercury Systems
|
| The RFM3111 from Mercury is a Microwave Transceiver that operates from 6 to 18 GHz. In Tx mode, it provides a gain of 20 dB, has a noise figure of less than 26 dB, and a P1dB of 21 dBm. In Rx mode, it provides a gain of 25 dB, has a noise figure of less than 17 dB, and a P1dB of 16 dBm. The transceiver has a versatile local oscillator (LO), low-phase noise, and fast tuning speed. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Non-Blocking 8x8 Solid-State Switch Matrix from 100 kHz to 4 GHz | |
Switch Matrix
from Becker Nachrichtentechnik GmbH
|
| The RSWM-8X8LR from Becker RF is an 8x8 Switch Matrix that operates from 100 kHz to 4 GHz. It has eight inputs and eight outputs interconnected via a non-blocking matrix where a single input can route to multiple outputs simultaneously. This switch matrix has high channel isolation to ensure that signals in adjacent radio channels do not affect each other. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W Solid State Low Noise Power Amplifier from 41 to 47 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The MPA3021 from Exodus Advanced Communications is a GaAs FET Hybrid Solid State Low Noise Power Amplifier that operates from 41 to 47 GHz. This class AB linear amplifier delivers over 2 W of saturated output power (P1dB of 1 W) with a gain of more than 33 dB. It has spurious of up to -60 dBc, and harmonics of up to -20 dBc. The amplifier has built-in protection circuits and requires external heat sink for cooling. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Vector Network Analyzer from 10 MHz to 44 GHz for 5G Component Characterization | |
Vector Network Analyzer
from Keysight Technologies
|
| The E5081A ENA-X from Keysight is a Vector Network Analyzer (VNA) that operates from 10 MHz to 44 GHz. This VNA can accelerate 5G and satellite communication component characterization and perform flexible high-power tests with direct receiver access to integrate booster amplifiers, attenuators, or directional couplers. It combines various measurements into a single instrument and enables system characterization with faster speeds and greater flexibility, at a lower cost. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable 1-Port Vector Network Analyzer from 85 MHz to 14 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The R140B from Copper Mountain Technologies is a 1-Port Vector Network Analyzer that operates from 85 MHz to 14 GHz. It supports linear, log and segment sweeps with up to 100,001 measurement points per sweep and a measurement time of 170 µs per point. This VNA has a dynamic range of 112 dB (85 – 4.8 GHz) and a directivity of 42 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Surface-Mount Ferrite Transformers from 150 kHz to 1200 MHz | |
Balun
from Coilcraft
|
| The WBC Series from CoilCraft are Wideband Transformers with bandwidths from 150 kHz to 1200 MHz. They have an impedance ratio of up to 1:16 and an insertion loss of less than 2 dB. The transformers have a ferrite core and are available in tapped or untapped configurations. They can handle an input power of 0.25 W and have a current rating of up to 250 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| Voltage-Controlled Oscillator from 1.2 to 2.7 GHz | |
Voltage Controlled Oscillator
from Dynamic Engineers
|
| The VCO1212BQ-1200MHz-2700MHz-A from Dynamic Engineers is a Voltage-Controlled Oscillator (VCO) that operates from 1200 to 2700 MHz. It provides an output power of 9 dBm with a phase noise of -85 dBc/Hz (at 10 kHz offset) and a 2nd harmonic suppression of -12 dB. This oscillator has a tuning voltage from 0 V to 22 V and a tuning voltage sensitivity from 15 to 200 MHz/V. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| Bench-Top RF Shield Box from 20 MHz to 12 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-1970-C from RF Electronics is an RF Shield Box for the frequency range from 20 MHz to 12 GHz. It has a thick RF-absorbing foam that deadens standing waves and reflections to provide more than 130 dB of isolation (at 20 MHz – 1 GHz). The test box has shielded power filters for powering devices placed inside the box while blocking all wireless signals. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wi-Fi HaLow Module for IoT Applications | |
RF Module
from Quectel
|
| The FGH100M from Quectel is a Wi-Fi HaLow Module that operates from 850 to 950 MHz. This IEEE 802.11ah standard-compliant module is suitable for smart home or smart city networks and allows users to control IoT devices in a radius of 1 km. It has channel bandwidths of 1/2/4/8 MHz, provides an output power of 21 dBm, and has a transmission rate of 32.5 Mbps. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Wi-Fi 6E (802.11ax) + Bluetooth 5.4 Combo Chips | |
Wireless SoC
from Infineon Technologies
|
| The AIROC CYW5551x from Infineon Technologies are 1x1 Wi-Fi 6/6E (802.11ax) + Bluetooth 5.4 Combo Chips. They provide robust connections, extended range, power savings, low latency, and device synchronization in IoT, smart home, and smart wearable devices. These chips offer excellent performance for Wi-Fi 6/6E requirements while maintaining a cost-effective balance of Wi-Fi 6/6E features and Bluetooth/BLE performance and power efficiency. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 GHz Front End Module for Wi-Fi 7 (802.11be) Applications | |
Front End Module
from Qorvo
|
| The QPF4559 from Qorvo is a 5 GHz Front-End Module (FEM) for Wi-Fi 7 (802.11be) systems. The FEM has an integrated 5 GHz power amplifier (PA), a single pole two-throw switch (SP2T), and a bypassable low noise amplifier (LNA). It has integrated die-level filtering for 2nd and 3rd harmonics as well as 2.4 GHz rejection for DBDC operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6-Way Power Divider from 2 to 5 GHz | |
Power Divider
from American Microwave Corporation
|
| The PDV-6W01 from American Microwave Corporation is a 6-Way Power Divider that operates from 2 to 5 GHz. It can handle an average power of up to 1 W, has an insertion loss of less than 2 dB and provides isolation of over 16 dB. The power divider has a phase imbalance of 5 degrees and an amplitude imbalance of 0.6 dB. When used as a combiner this device can handle up to 4 W of power at each port. It is available in a connectorized module and can be used as a non-coherent or coherent combiner. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-constellation Triple Band GNSS Antenna with L-band Correction Services | |
GPS/GNSS Antenna
from Tallysman Wireless
|
| The ARM972XF from Tallysman is a Triple Band GNSS Antenna with L-band Correction Services. It uses Tallysman’s patented Accutenna® technology to cover GPS/QZSS-L1/L2/L5, GLONASS-G1/G2/G3, Galileo-E1/E5a/E5b, BeiDou-B1/B2a/B2b, NavIC-L5 + L-band correction services. This antenna has an integrated low-noise amplifier (LNA) that operates from 1160 to 1606 MHz and provides out-of-band rejection of more than 45 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Precision-Calibrated Waveguide Noise Source from 140 to 200 GHz | |
Noise Source
from ERAVANT
|
| The STZ-14420412-05-IT2 from ERAVANT is a Precision-Calibrated Noise Source that operates from 140 to 200 GHz. It has an excess noise ratio (ENR) of 12 dB and an ENR flatness of ±4 dB. This noise source is designed with improved port return loss for high reliability and accurate noise figure measurements. It can work either in CW or pulsed AM mode up to 1 kHz, depending on the driving signal. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4/8-Channel Oscilloscopes with Bandwidths up to 2 GHz | |
Oscilloscope
from Rohde & Schwarz
|
| The R&S®MXO 5 Series from Rohde & Schwarz are Oscilloscopes that are available in four and eight-channel models. They have bandwidth options of 100 MHz, 200 MHz, 350 MHz, 500 MHz, 1 GHz, and 2 GHz. These oscilloscopes have two MXO-EP (extreme performance) Rohde & Schwarz application-specific integrated circuits (ASIC) to perform 4.5 million acquisitions per second and 18 million waveforms per second across multiple channels. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 GS/s, 12-bit High-Performance Digitizers with a Bandwidth of 4.7 GHz | |
PXI Digitizer
from Spectrum Instrumentation
|
| The M5i.33xx-x16 from Spectrum Instrumentation are 12-bit High-Speed Digitizers. They have up to 2 analog-input channels, and 4 digital-input channels and support sampling rates of up to 10 GS/s (1 channel) with a signal bandwidth of up to 4.7 GHz. The high bandwidth and fast sampling allow signals to be analyzed for frequency content anywhere from DC to the Nyquist limit (half the sample rate, or up to 5 GHz). |
| |
Download Datasheet
Product Details | |
|
|
|
| High-precision, Waveguide Programmable Attenuators from 18 to 170 GHz | |
Waveguide Attenuator
from QuinStar Technology Inc
|
| The QPA Series from QuinStar Technology are precision motorized programmable attenuators that operate from 18 to 170 GHz. They have an attenuation range from 0 to 80 dB with a step size of 0.02 dB. These attenuators can handle an input power of up to 1 W, and have an insertion loss of less than 3 dB. They are designed to meet the stringent requirements of the aerospace defense and space industries. |
| |
Download Datasheet
Product Details | |
|
|
|
| 300 W GaN Pulsed Power Amplifier from 8.5 to 9.8 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-HPA-0850-0980-55 from ERZIA is an X-Band GaN Pulsed power amplifier that operates from 8.5 to 9.8 GHz. It provides an output power of 300 watts with a gain of 45 dB. The amplifier requires a supply voltage of 22 to 36 V and has a VSWR of 2.0:1. It is available in a compact aluminum housing that measures 178 x 215 x 42.5 mm with an SMA (F) connector at the input and WR- 90 waveguide interface at the output. |
| |
Download Datasheet
Product Details | |
|
|
|
| Washable and Rugged UHF RFID Tags for Flat Linen Applications | |
RFID Tag
from Fujitsu
|
| The Softight W5RL from Fujitsu is a UHF RFID Tag designed for superior performance and durability for flat linen applications. This rugged tag can withstand high-pressure extractors, industrial washing and drying, and rugged environments without losing performance, all in a cost-effective package. It can withstand 200 wash cycles and is chemically resistant to standard detergent, softener, bleach (Oxygen/ Chlorine), Alkali, and acetic/peracetic acid. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dust Cap with Chain for TRB Male Connectors | |
RF Dust Cap
from Pasternack Enterprises Inc
|
| The PE610-06304 from Pasternack is a Dust cap for TRB Male connectors. It has a straight geometry and uses shield/contact as an attachment method. This dust cap has a 3-inch brass chain and a brass body with nickel plating. It measures 0.8 x 0.56 x 0.56 inches and weighs 4.54 gm. It has an operating temperature range of -55 to 200°C and is suitable for general-purpose testing applications. |
| |
Download Datasheet
Product Details | |
|
