| New RF and Microwave Products this Week . |
|
|
| 25 W GaN Power Amplifier MMIC from 13.75 to 14.5 GHz | |
RF Amplifier
from Qorvo
|
| The QPA0017 from Qorvo is a Power Amplifier MMIC that operates in the Ku-Band from 13.75 to 14.5 GHz (optional 12.75 – 15.35 GHz). It delivers an output power of 44 dBm (25 W) with a gain of 30 dB and a power added efficiency of 35%. This amplifier is fabricated using Qorvo's production 0.15 um GaN-on-SiC process (QGaN15) and has on-chip blocking capacitors with DC grounded I/O ports for optimum ESD performance. It is ideal for communications and radar applications in both commercial and military markets. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Radio Link Simulator for Satellite Applications | |
Satellite Link Emulator
from Square Peg Communications Inc
|
| The RLS-2100 from Square Peg Communications is a comprehensive satellite channel simulator with unparalleled impairment simulation, real-time multi-satellite orbit calculation, full-motion support and integrated GPS simulators. It can provide end-to-end or single link simulation of wideband terrestrial and satellite networks, satellite selection via open standard interfaces, and facilities to enable seamless integration into more complex test beds if required. |
| |
Download Datasheet
Product Details | |
|
|
|
| Satellite Link Emulator from 950 to 1450 MHz for Closed-Loop Testing | |
Satellite Link Emulator
from Polaris
|
| The ASLE-L-200D from Polaris is a Satellite Link Emulator that operates in the L-Band from 950 to 1450 MHz (extendable up to 1950 MHz). It includes an L-band frequency converter, has a bandwidth of 200 MHz and provides a gain of up to 0 dB. This link emulator exhibits a time delay from 0 to 530 ms with a step size of 1 µs, a Doppler shift from -6 to +6 MHz with a step size of 1 Hz and an attenuation from 0 to 40 dB with a step size of 0.5 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Portable Real-Time USB Spectrum Analyzers from 9 kHz to 18 GHz | |
RF Spectrum Analyzer
from Tektronix, Inc.
|
| The RSA500 Series from Tektronix are Ruggedized, Portable Real-Time Spectrum Analyzers (RTSA) with a frequency range from 9 kHz to 18 GHz. They have an acquisition bandwidth of 40 MHz and a dynamic range from -160 dBm to +20 dBm to enable real-time analysis for transient capture and vector analysis. These analyzers have a full-span sweep speed of up to 70 GHz/sec and a minimum event duration for 100% POI of 15 µs. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB-Powered Real-Time Spectrum Analyzer from 9 kHz to 6 GHz | |
RF Spectrum Analyzer
from Signal Hound
|
| The BB60D from Signal Hound is a Spectrum Analyzer that operates from 9 kHz to 6 GHz. It streams 140 MB/sec of digitized RF signals to a PC over the USB 3.0 interface, providing an instantaneous bandwidth of 27 MHz, and sweeping at speeds of 24 GHz/sec. This analyzer performs spectrum analysis using the proprietary application programming interface (API) which can execute up to 1.2 million FFT spectrums or 320 million FFT points every second, delivering real-time spectrum data. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP67/IP68-Rated Waterproof RF and Microwave Connectors | |
RF Connector
from IntelliConnect
|
| The Pisces Series are waterproof connectors from IntelliConnect that have been developed for use in mil-aerospace, SCADA, marine, medical, transportation, and oil and gas applications. These IP67 and IP68 rated connectors are sealed internally and are therefore waterproof when unmated. They are available in various connector formats that include: ABMS (Rugged MCX), N-Type, Push-Pull, TNC, and SMA. |
| |
Product Details | |
|
|
|
| Software for Simulating Antenna Performance in 5G-capable Devices | |
Software
from Remcom
|
| XFdtd from Remcom is a time-domain electromagnetic simulation software that enables in-depth analysis of a device’s stand-alone performance. Detailed CAD models of the antennas, PCB, and device assembly can be imported from Pro Engineer, Allegro, and other software packages. Available results from a single finite-difference time-domain (FDTD) simulation include antenna isolation, envelope correlation, antenna efficiency, and antenna patterns. |
| |
Download Datasheet
Product Details | |
|
|
|
| Phase-Stable and Flexible Cable Assemblies from DC to 50 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The StabilityFlex™ from Maury Microwave are Phase-Stable Cable Assemblies that operate from DC to 50 GHz. They are available in 24", 36", 48", and 60" lengths (custom lengths available) with N-type, SMA, 2.92mm and 2.4mm connectors. These ultra-flexible cable assemblies have a phase stability vs flexure of ±4°, amplitude stability vs flexure of ±0.05 dB, and provide shielding of more than 100 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 dB SMT Directional Coupler from 2 to 6 GHz | |
Directional Coupler
from Innovative Power Products
|
| The IPP-8111 from Innovative Power Products is a Directional Coupler that operates from 2 to 6 GHz. This 20 dB coupler provides a directivity of more than 17 dB and has an insertion loss of less than 0.35 dB. It can handle an input power of up to 150 W and has a VSWR of less than 1.35:1. The coupler is available in a surface-mount package that measures 0.5 x 1.0 inches. |
| |
Download Datasheet
Product Details | |
|
|
| Featured Whitepaper: Download Now! | | |
|
|
| 100 W RF Attenuator from DC to 400 MHz | |
Fixed Attenuator
from Inmet by Spectrum Control
|
| The Model TPA100 from Inmet by Spectrum Control is a Thick Film RF Attenuator that operates from DC to 400 MHz. It is available in 1, 2, 3, 4, 6, 10, and 20 dB attenuation configurations and has an accuracy of ±0.5 dB. The attenuator can handle an input power of up to 100 W and is designed to uniformly reduce the power of the RF signal while generating only a small reflection, even under maximum power conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 30 W, 2-Way In-Line Power Divider/Combiner from 450 to 7500 MHz | |
Power Divider
from Werbel Microwave
|
| The D-2074 from Werbel Microwave is a 2-way In-Line Power Divider/Combiner that operates from 450 to 7500 MHz. It can handle a CW input power of up to 30 W (splitter configuration), provides more than 14 dB of isolation, and has an insertion loss of less than 1.3 dB. This REACH-compliant power divider has an amplitude balance of ±0.1 dB and a phase balance of ±8°. |
| |
Download Datasheet
Product Details | |
|
|
|
| SPST Switch from 0.01 to 20 GHz | |
RF Switch
from ERZIA
|
| The ERZ-SW1-0001-2000-1.5 from ERZIA is an SPST Switch that operates from 0.01 to 20 GHz. It has a switching time of 40 ns and provides an isolation of 45 dB. This switch can handle an input power of up to 27 dBm, has an insertion loss of 1.5 dB, and a VSWR of 1.5:1 (input/output). It requires a dual DC supply from -0.5 to 0 / –7 to -3 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.85 mm PCB Compression-Mount Connector from DC to 67 GHz | |
RF Connector
from Samtec
|
| The 185-J-P-EP-ST-CM-1 from Samtec is a 1.85 mm (Jack) Compression Mount Connector that operates from DC to 67 GHz. It has a dielectric withstanding voltage (DWV) of more than 600 V(RMS) and a VSWR of less than 1.35:1. This PCB compression mount connector has a stainless-steel shell, can withstand more than 500 mating cycles and has an operating temperature range of -65°C to +125°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Shielded Test Box for EMC Testing from 20 MHz to 6 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-6U60-B1 from RF Electronics is a RF Shielded Test Box that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides isolation of more than 130 dB which attenuates standing waves and reflections. The RF Test box is equipped with shielded power filters for power connections in the box while still blocking all wireless signals. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Modular, 4-Port Vector Network Analyzers from 300 kHz to 8.5 GHz | |
Vector Network Analyzer
from Sanko Technologies
|
| The BN900 Series from Sanko Technologies are Modular Vector Network Analyzers with a frequency range from 300 kHz to 6.5/8.5 GHz. They have a dynamic range of up to 130 dB (at IFBW of 10 Hz) with a low trace noise of 2 mdB (rms; at IFBW of 3 kHz). These analyzers have a measurement speed of 42 µs/point (at IFBW of 500 kHz), up to 20,001 measurement points and an effective directivity from 38 to 49 dB to ensure accurate and reliable measurement results. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Port Vector Network Analyzers from 10 MHz to 20 GHz | |
Vector Network Analyzer
from Micran
|
| The R4M Series from Micran are Vector Network Analyzers (VNAs) with a frequency range from 10 MHz to 20 GHz. They have a dynamic range of 100 dB and are used to measure the S-parameters of linear 1-port and 2-port devices and various characteristics of electric circuits. These analyzers are useful for analyzing, tuning, testing, monitoring, and manufacturing of high-frequency and microwave devices used in radio electronics, communications, radars, and measurement equipment. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Multi-Beam Base Station Lens Antenna from 698 to 2690 MHz | |
Base Station Antenna
from MatSing
|
| The MS-MBA-6.3-H4-L2 from MatSing is a Multi-Beam Base Station Antenna that operates from 698-960 MHz (L-band) and 1695-2690 MHz (H-band). It utilizes MatSing’s patented spherical lens design and supports 3 beams (698 – 960 MHz) and 6 beams (1695 – 2690 MHz). This dual-slant ±45°polarized antenna provides a gain of 21.5 dBi with a horizontal coverage of 120° and a horizontal/vertical beamwidth of 22°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 36-Port 5G-Ready Base Station Antenna from 698 to 2690 MHz | |
Base Station Antenna
from Amphenol Antenna Solutions
|
| The 5778500-3 from Amphenol Antenna Solutions is a 36-Port Base Station Antenna that operates from 698 – 960 MHz and 1427 – 2690 MHz. This cross-polarized antenna provides a gain of 14 dBi and has a VSWR of less than 1.50:1. It has an azimuth beamwidth of 65°, an elevation beamwidth of up to 13.6° and allows an electrical down-tilt from 2° to 12°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 m Test Range Semi-Anechoic Chamber from 30 MHz to 40 GHz | |
Anechoic Chamber
from TDK RF Solutions
|
| The 10 m Test Range Semi-Anechoic Chamber from TDK Corporation can be used to test products that operate at a frequency range from 30 MHz to 40 GHz (EMI) and 26 MHz to 19 GHz (EMS). It has been designed to perform radiated emission and immunity measurements of RF signals over a distance of up to 10 m. This chamber is fully compliant with ANSI C63.4, EN 50147-2, and CISPR 22 standards. |
| |
Download Datasheet
Product Details | |
|
