| Featured Products this Week . |
|
|
| Upconverter and Downconverter for 5G Radios from 24 to 29.5 GHz | |
RF Up-down Converter
from Analog Devices
|
| The ADMV1128A from Analog Devices is a Microwave Upconverter and Downconverter that is designed for 5G radios from 24 to 29.5 GHz. It has an integrated upconverter (a transmitter), a downconverter (a receiver), and a LO chain with options of a 2x or 4x multiplier in one chip. Both upconverters and downconverters offer two modes of frequency translation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 & 30 dB Attenuators from DC to 2.3 GHz | |
Fixed Attenuator
from Inmet by Spectrum Control
|
| The 2KNA150 from Inmet by Spectrum Control are high power attenuators that operate from DC to 2.3 GHz. They are available with attenuation values of 20 & 30 dB and can handle up to 150 W of input power. These surface mount attenuators can be used in mobile networks, high power amplifiers and other military and commercial applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Passive Double Balanced Mixer from 2.5 to 6 GHz | |
RF Mixer
from Amcom Communications
|
| The AM256009XD-P3 from AMCOM Communications is a Passive Double Balanced Mixer with an RF/LO frequency from 2.5 to 6 GHz and an IF frequency from DC to 1.5 GHz. It has an LO drive level of 13 dBm and a conversion loss of less than 9.5 dB. This mixer provides an LO-RF isolation of 28 dB and an LO-IF isolation of 14 dB with an IP3 of 19 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| USB-compatible, Synthesized Signal Generator from 10 to 20 GHz | |
Signal Generator
from Vaunix
|
| The Lab Brick LMS-203 is a USB-compatible, synthesized signal generator that covers a frequency range from 10 to 20 GHz with 10 dBm output power, low noise, fast 100-microsecond switching time, and fine 100 Hz frequency resolution. They require no additional DC supply voltage and offer advanced features such as phase-continuous linear-frequency sweeping, internal/external 10 MHz reference, and optional pulse modulation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4x4 Butler Matrix from 6 to 26.5 GHz | |
Butler Matrix
from KRYTAR
|
| The KBM9060265 from KRYTAR is a 4x4 Butler Matrix that operates from 6 to 26.5 GHz. It provides more than 10 dB of isolation and has an insertion loss of 13.5 dB. This butler matrix has a phase imbalance of ±16° and an amplitude imbalance of ±1.6 dB. It is available in a module that measures 4.78 x 3.71 x 1.11 inches with SMA-female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| High Reliability, Air Core Power Inductors 22 to 117 nH | |
RF Inductor
from Coilcraft
|
| The 1212VS Series from Coilcraft are High-Reliability Power Inductors with inductance values from 22 to 117 nH. These air core inductors can handle up to 57 A of current with no core loss and have Q factors up to 200 (400 MHz). They are available in packages that measure 12.00 x 11.50 x 11.30 mm with RoHS-compliant tin-silver over copper terminations. |
| |
Download Datasheet
Product Details | |
|
|
|
| Miniature Chip Antenna for Wi-Fi & Bluetooth Applications | |
Antenna
from Ignion
|
| The NANO mXTEND™ (NN02-101) from Ignion is a Miniature Wi-Fi and Bluetooth Antenna that is optimized for operation from 2400 to 2500 MHz but can operate up to 8 GHz. It is the smallest off-the-shelf antenna for Wi-Fi with customizable performance. This linearly polarized antenna provides a peak gain of 2.4 dBi with an efficiency of more than 70%. |
| |
Download Datasheet
Product Details | |
|
|
|
| VNA Cable Assemblies from DC to 50 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The Stability VNA Cable Assemblies from Maury Microwave are Test Port Cable Assemblies that operate from DC to 50 GHz. They have excellent phase stability (up to 8 degrees) with flexure and ensure repeatable and reliable measurements. The assemblies have an anti-skid band to ensure that they can be arbitrarily positioned with no spring-back or stress on the DUT. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6-Bit, 360° SOI Phase Shifter from 8 to 11.5 GHz | |
Digital Phase Shifter
from Qorvo
|
| The QPC2110 from Qorvo is an SOI 6-bit Phase Shifter that operates from 8 to 11.5 GHz. It provides phase coverage of 360° with an LSB (least significant bit) of 5.625°. This bi-directional phase shifter has an insertion loss of 5.5 dB with an RMS amplitude error of less than 0.4 dB and an RMS phase error of less than 3 dB. This phase shifter has a switching speed of up to 91 ns and requires a control voltage of 0/+3.3V. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Rugged Low Noise Amplifier from 1 to 18 GHz | |
RF Amplifier
from AmpliTech
|
| The APTMP4-01001800-1520-D4 from AmpliTech is a Low Noise Amplifier that operates from 1 to 18 GHz. It provides more than 35 dB of gain with a noise figure of less than 1.5 dB and a P1dB of 20 dBm. The LNA is fabricated using state-of-the-art PHEMT technology and is MIL-883 and MIL-45208 certified. It has internal DC regulators which allow DC supply from 11 to 24 V and consumes less than 350 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 dB Directional Coupler from 0.4 to 4 GHz | |
Directional Coupler
from DETI Microwave
|
| The CD-1-400-4000-10-50-SF-SF-SF / 001665 from DETI Microwave is a Directional Coupler that operates from 0.4 to 4 GHz. This 10 dB coupler provides a directivity of over 20 dB and has an insertion loss of less than 0.75 dB. It can handle an average input power of 50 W and has a VSWR of less than 1.40:1. This directional coupler is available in a module that measures 124 x 20 x 12 mm with SMA-female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 V Inner DC Block from 30 MHz to 40 GHz | |
DC Block
from Aaren Technology Ltd
|
| The AT35A-3637-A-I-40 from Aaren Technology is an Inner DC Block that operates from 30 MHz to 40 GHz. It has a DC voltage rating of 50 V, an insertion loss of less than 0.8 dB, and a VSWR of up to 1.30:1. This DC block is available in a SU303F-polished and passivated module that measures 25 x 9 mm and has 2.92 mm (K) male/female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Top-Side Cooled RF Power Amplifiers for 5G Infrastructure from 3300 to 3670 MHz | |
RF Amplifier
from NXP Semiconductors
|
| The A5M34TG140-TC from NXP Semiconductors is a Doherty Power Amplifier Module that operates from 3300 to 3670 MHz. It is based on NXP's new top-side cooling technology that helps radio designers create thinner, lighter 5G radio units while reducing design and manufacturing complexities. This 8 W module series is designed for massive MIMO radios covering 3.3 GHz to 3.8 GHz — typically 32T32R (200 W) or 64T64R (320 W) radios. |
| |
Download Datasheet
Product Details | |
|
|
|
| 9-Way Divider/Combiner from 20 to 3000 MHz | |
Power Divider
from Preferred Power Products (P3)
|
| The PNW9-20-3000-1S from Preferred Power Products is a 9-Way Divider/Combiner that operates from 20 to 3000 MHz. It can handle an input power of up to 1 W (as a divider), provides up to 23 dB of isolation, and has an insertion loss of less than 16 dB. This divider/combiner has a phase balance of ±4° and an amplitude balance of ±0.75 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3D Wireless Prediction Software | |
Software
from Remcom
|
| Wireless InSite® is a suite of ray-tracing models and high-fidelity EM solvers for the analysis of site-specific radio wave propagation and wireless communication systems. The RF propagation software provides efficient and accurate predictions of EM propagation and communication channel characteristics in complex urban, indoor, rural and mixed path environments. Wireless InSite's unique ray-tracing capabilities determine multipath propagation through a 3D environment, including diffuse scattering at millimeter waves. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W GaN Solid-State Power Blockup Converter from 13.75 to 14.5 GHz | |
Block Up Converter
from Communications & Power Industries
|
| The CPKOG1430SOTM from Communications & Power Industries is a Solid-State Power Blockup Converter (SSPB) that converts an input frequency (IF) from 950-1700 MHz to an output frequency (RF) from 13.75-14.50 GHz. It delivers an output power of 50 W (~ +47 dBm) with a gain of more than 53 dB. This SSPB has a phase noise (LO) of -78 dBc/Hz (at 1 kHz offset) and spurious emissions and harmonics of better than -60 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8 GHz SP4T Switch for Massive MIMO 4G/5G Base Stations | |
RF Switch
from pSemi, A Murata Company
|
| The PE42446 from pSemi is an SP4T Switch that operates from 10 MHz to 8 GHz. It provides more than 60 dB of isolation to prevent interference and maintain signal integrity and has a switching time of 250 ns. This switch integrates seamlessly into 4G and 5G base stations and massive MIMO architecture and provides digital pre-distortion (DPD) feedback loops and transmitter monitoring signal paths. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-6 GHz Scalable Cellular/Non-Cellular Radio Communication Tester | |
RF Test Set
from Rohde & Schwarz
|
| The R&S CMW500 from Rohde & Schwarz is a Compact Radio Communication Tester for the frequency range from 70 MHz to 3.3 GHz (optional up to 6 GHz). It is a fast and precise solution for production testing of current and future wireless devices such as mobile phones and tablets. The base model of this tester comes with a general-purpose RF power meter and CW generator with list modes for fast calibration of wireless devices. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Mode LTE Cat 4 Smart Modules for Global M2M Applications | |
Cellular Module
from Quectel
|
| The SC696S Series from Quectel are Multi-Mode LTE Cat 4 Smart Modules that have a built-in Linux OS. They deliver a downlink data rate of 150 Mbps and an uplink data rate of 50 Mbps. These modules are based on QCM6125 high-performance 64-bit ARM Kryo 260 octa-core processors with a built-in Qualcomm high-performance Adreno 610 graphics engine (GPU). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5G-NR mmWave Antenna Module from 24.25 to 43.5 GHz | |
Front End Module
from Qualcomm
|
| The QTM545 from Qualcomm is a 5G-NR mmWave Antenna Module that operates from 24.25 to 43.5 GHz covering global 5G mmWave bands. It has a bandwidth of up to 1000 MHz and utilizes performance enhancement technologies like dual-layer polarization in downlink and uplink (mmWave), beam tracking (mmWave), beam forming (mmWave), and beam steering (mmWave). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| RFID Inlay from 865 – 868 MHz (ETSI) and 902 – 928 MHz (FCC) | |
RFID Tag
from Zebra
|
| The ZBR4100 from Zebra is an RFID Inlay that operates from 865 – 868 MHz (ETSI) and 902 – 928 MHz (FCC). It utilizes a high-sensitivity UCODE 9 chip, which ensures read ranges of up to 20 meters in free space and is optimized to be read from nearly any angle. This inlay is designed and tested for optimal performance with Zebra printers and RFID readers which enables users to maximize the benefits of RFID in their enterprise. |
| |
Download Datasheet
Product Details | |
|
