| Featured Products this Week . |
|
|
| 2.4/5 GHz Wi-Fi 6 + Bluetooth 5.3 + Thread Combo Modules | |
RF Module
from u-blox AG
|
| The IRIS-W10 Series from u-blox are small, stand-alone, 2.4/5 GHz Wi-Fi 6, Bluetooth 5.3, and Thread wireless microcontroller unit (MCU) modules. They are certified for global use and offer improved network efficiency, latency, range, and power consumption compared to earlier Wi-Fi generations. They also support Bluetooth Low Energy 5.3 and Thread mesh networking protocol. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Front-End Module for WLAN and Bluetooth Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY85300-21 from Skyworks Solutions is a 2.4 GHz Front-End Module for WLAN and Bluetooth applications. It has a fully matched power amplifier (PA), power detector, harmonic filter, low-noise amplifier (LNA), and single-pole, triple-throw (SP3T) switch. This FEM also has a transmitter positive slope power detector with 20 dB of dynamic range, and a digital enable control for transmitter power ramp on/off control. |
| |
Download Datasheet
Product Details | |
|
|
|
| UWB + Bluetooth LE Combo Module from 6250 to 8250 MHz | |
RF Module
from Murata
|
| The LBUA2ZZ2DK (Type 2DK) from Murata is an Ultra-Wideband (UWB) + Bluetooth LE Combo Module. It operates in the 2.4 GHz (for Bluetooth) and from 6250 to 8250 MHz (for UWB) covering UWB channels 5 and 9. This module has an NXP Trimension SR040 UWB chipset, an NXP QN9090 ARM Cortex-M4 MCU + Bluetooth LE chipset with 640 KB Flash and 152 KB SRAM. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-6 GHz Automotive Modules for 5G and C-V2X/DSDA Applications | |
Cellular Module
from Quectel
|
| The AG57xQ Series from Quectel are Sub-6 GHz Automotive Modules that are designed for 5G and C-V2X/DSDA applications. They are based on the AEC-Q100 qualified Qualcomm SA515M chipset and are compliant with IATF 16949 and automotive quality processes such as APQP and PPAP. These modules adopt the 3GPP Rel-15 technology and support both 5GNR NSA and SA modes with 4G/3G/2G fallback. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15 GHz Surface-Mount Fixed Frequency PLL Synthesizer | |
Phase Locked Loop
from Z-COMM
|
| The RFS15000C-LF from Z-Communications is a Fixed Frequency PLL Synthesizer that generates frequency of 15 GHz. It provides an output power of -6 dBm with a phase noise of -80 dBc/Hz and has a settling time of 3 ms. This synthesizer has an integrated 10 MHz TCXO reference oscillator (frequency stability of ±10 ppm), phase detector, loop filter, VCO and PIC microcontroller. |
| |
Download Datasheet
Product Details | |
|
|
|
| MIPI-Controlled SP4T Switch from 0.04 to 7.125 GHz for 5G/LTE Applications | |
RF Switch
from Infineon Technologies
|
| The BGS14M8U9 from Infineon is an SP4T Switch that operates from 400 MHz to 7.125 GHz. It has a switching speed of 1.3 µs and provides an isolation of up to 49 dB. This switch can handle an input power of up to 39 dBm and has an insertion loss of less than 0.9 dB. It is optimized for 5G and other cellular applications and is suitable for 5G and LTE 4G applications, such as 5G SRS, uplink-carrier aggregation and high-power user equipment. |
| |
Download Datasheet
Product Details | |
|
|
| Featured Whitepaper: Download Now! | | |
|
|
|
|
|
|
|
| 100 W Space-Qualified Hybrid Coupler from 71 to 76 GHz | |
Waveguide Coupler
from Smiths Interconnect
|
| The 26WC404 from Smiths Interconnect is a Space-Qualified Hybrid Coupler that operates from 71 to 76 GHz. It can handle a CW input power of up to 100 W (1 W load fitted). This 2 x 1 hybrid coupler has an insertion loss of less than 0.4 dB and provides an isolation of more than 23 dB. It is designed for space and terrestrial environments and is qualified for environmental stress screening capability including mechanical shock, sine/random vibration, and humidity testing. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Compact Spectrum Analyzer and Measuring Receiver from 100 kHz to 12.4 GHz | |
RF Spectrum Analyzer
from Signal Hound
|
| The USB-SA124B Spectrum Analyzer and Measuring Receiver from Signal Hound that operates from 100 kHz to 12.4 GHz. This USB powered compact analyzer is ideal for general field and lab use, electrical engineering students, ham radio enthusiasts, and electronic hobbyists. It has a wide dynamic range from -151 dBm to 10 dBm and can also be used as a down-converter with a 63 MHz IF Output and a 6 MHz Resolution Bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact Real-Time Spectrum Analyzer from 9 kHz to 8 GHz | |
RF Spectrum Analyzer
from Aaronia AG
|
| The SPECTRAN V6 ECO 200XA-6 from Aaronia is a Compact Real-Time Spectrum Analyzer that operates from 9 kHz to 6 GHz (up to 8 GHz optional extension for Wi-Fi 6E support). It incorporates a vector signal generator, has a real-time bandwidth of 44 MHz (Tx) and 88 MHz (2 x 44 MHz, via USB), and a resolution bandwidth from 62 to 200 MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Battery-Powered Portable RF Spectrum Analyzer from 9 kHz to 3 GHz | |
RF Spectrum Analyzer
from Anritsu
|
| The Field Master™ MS2070A from Anritsu is a Handheld RF Spectrum Analyzer that operates from 9 kHz to 3 GHz. It conducts reliable and accurate RF measurements in a variety of general-purpose fields, labs, and manufacturing environments at an economical price. This spectrum analyzer has sweep speeds of up to 32 GHz/s in common low-noise configurations and can conduct a variety of “smart” measurements, including occupied bandwidth (OBW), channel power, and adjacent channel power (ACP). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2 W GaN Power Amplifier from 20 to 40 GHz | |
RF Amplifier
from Qorvo
|
| The QPA2040D from Qorvo is a Power Amplifier that operates in the Ka-Band from 20 to 40 GHz. It delivers an output power of 33.5 dBm (~2.2 W) with a small signal gain of 24.3 dB and a power-added efficiency of 13%. This amplifier is fabricated using Qorvo's production 0.15 um GaN-on-SiC process (QGaN15) and has on-chip blocking capacitors with DC grounded I/O ports for optimum ESD performance. It is ideal for communications, radar, point-to-point radio, and electronic warfare applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 8 GHz SP4T Switch for Massive MIMO 4G/5G Base Stations | |
RF Switch
from pSemi, A Murata Company
|
| The PE42446 from pSemi is an SP4T Switch that operates from 10 MHz to 8 GHz. It provides more than 60 dB of isolation to prevent interference and maintain signal integrity and has a switching time of 250 ns. This switch integrates seamlessly into 4G and 5G base stations and massive MIMO architecture and provides digital pre-distortion (DPD) feedback loops and transmitter monitoring signal paths. |
| |
Download Datasheet
Product Details | |
|
|
|
| 16-Way Power Divider from 500 to 6000 MHz | |
Power Divider
from Werbel Microwave
|
| The D-16002 from Werbel Microwave is a 16-Way Power Divider that operates from 500 to 6000 MHz. It can handle an input power of up to 30 W, provides an isolation of more than 16 dB, and has an insertion loss of less than 4.5 dB. The power divider has an amplitude balance of ±1.2 dB and a phase balance of ±16°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 W, 40 dB Directional Coupler from 6 to 18 GHz | |
Directional Coupler
from Narda-MITEQ
|
| The 27004A-40 from Narda-MITEQ is a Directional Coupler that operates from 6 to 18 GHz. This 40 dB coupler provides a directivity of more than 10 dB and has an insertion loss of less than 0.5 dB. It can handle up to 400 W of input power and 5 kW of peak input power. This directional coupler is available in a module that measures 104 x 23.83 x 30.48 mm with TNC and SMA connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 200 Km Microwave Backhaul Radio Link from 3300 to 3900 MHz | |
Microwave Backhaul Radio Links
from Ubiquiti Inc
|
| The AF-3X from Ubiquiti is a Microwave Backhaul Radio Link that operates from 3300 to 3900 MHz. It delivers a data rate of up to 687.9 Mbps and uses xtreme Range Technology (xRT) to provide a maximum range of more than 200 km. This microwave backhaul radio link can deliver over 1 million packets per second with a latency of less than 2 ms (at full throughput, half duplex mode). |
| |
Download Datasheet
Product Details | |
|
|
|
| UHF RFID Tag IC for Global Operation from 840 to 960 MHz | |
RFID Tag IC
from Alien Technology
|
| The Higgs™ 10 from Alien is a UHF RFID Tag IC that is designed for global operation from 840 to 960 MHz. It has excellent read/write sensitivity along with enhanced backscatter capability and is optimized for high-volume applications. This RFID IC provides a flexible EPC memory structure supporting 96-bit EPC formats, plus a 32-bit expansion for longer EPC formats. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 km, NATO Band III+/Band IV Line-of-Sight Radio System | |
Data Link
from Elbit Systems
|
| The GRX-8000 from Elbit Systems is a Radio System that operates in the NATO Band IV (4.4 to 5 GHz) and optional NATO Band III+ (1.35 to 2.7 GHz). It is a line-of-sight radio system with a range of 100 Km and supports fixed frequency (FF) and frequency hopping (FH) modes. This radio system provides a one-way data rate of up to 100 Mbps and an aggregated data rate of up to 200 Mbps. |
| |
Download Datasheet
Product Details | |
|
