| New RF and Microwave Products this Week . |
|
|
| Multi-Throw Electromechanical Switches from DC to 40 GHz | |
RF Switch
from Teledyne Relays
|
| The CCT-49K Series from Teledyne Relays are Multi-Throw Electromechanical Switches that operate from DC to 40 GHz. These internally terminated switches have a break-before-make design and can switch a microwave signal from a common input to any of the 3, 4, 6, and 8 output ports. They provide an isolation of up to 80 dB, have an insertion loss of less than 1.5 dB, and a VSWR of less than 2.2:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Passive Frequency Doubler from 4 to 15 GHz | |
Frequency Multiplier
from Marki Microwave
|
| The MMD-0415HS from Marki Microwave is a Frequency Doubler with an input frequency from 2 to 7.5 GHz and an output frequency from 4 to 15 GHz. It can handle an input power of 20 dBm, has an isolation of up to 47 dB and has a conversion loss of 11 dB. This passive doubler is fabricated with GaAs Schottky diodes and has a low conversion loss, high isolation and low harmonic suppressions across the bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTCC Highpass Filter with Passband from 17.3 to 33.0 GHz | |
RF High Pass Filter
from Mini Circuits
|
| The HFCU-1682+ from Mini-Circuits is a Low-Temperature-Cofired-Ceramic (LTCC) Highpass Filter with a passband from 17.3 to 33.0 GHz. It can handle an input power of 7 W, has a passband insertion loss of less than 3 dB and provides a rejection of up to 51 dB in the stopband. This highpass filter is based on an LTCC fabrication process that ensures minimal RF performance variation while operating in extreme environments of high humidity and temperature. |
| |
Download Datasheet
Product Details | |
|
|
|
| Thin-Film Highpass Filters with a Passband from 1.6 to 5.15 GHz | |
RF High Pass Filter
from KYOCERA AVX
|
| The HP0805 Series from Kyocera AVX are Highpass Filters with a passband frequency from 1600 to 5150 MHz. They have an insertion loss of 1.5 dB and provide an out-of-band rejection of 25 dB. These filters are based on thin-film multilayer technology that enable a miniature part with excellent high-frequency performance and rugged construction for reliable automatic assembly. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W CW/Pulsed Solid-State Power Amplifier from 6 to 18 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2033-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 6 to 18 GHz. It delivers a CW/Pulsed saturated output power of more than 100 W with a power gain of over 50 dB. The amplifier has built-in protection circuits with optional monitoring parameters for forwarding/Reflected power, VSWR, voltage, current & temperature sensing for superb reliability and ruggedness. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 W Bolt Down RF Termination from DC to 6 GHz | |
Termination
from JFW Industries
|
| The 50T-689 from JFW Industries is a Bolt Down RF Termination that operates from DC to 6 GHz. It can handle an average input power of 200 W, a peak input power of 1 kW (1 µs pulse), and a VSWR of less than 1.3:1. This bolt-down termination is available in a package that measures 2.00 x 1.63 x 1.06 inches with N-type or SMA connectors. |
| |
Download Datasheet
Product Details | |
|
|
| Featured Article by Pivotal | | How to Select a 5G Repeater | | Cellular repeaters have been in existence since the very early days of telecommunication. Fundamentally they deliver cellular service to an underserved region where the base station signal does not reach an area where connectivity to handsets is necessary. Initial use cases for repeaters served public safety and 2-way radios. Click here to learn more. | | | |
|
|
| Low Noise Cryogenic Amplifier from 6 to 8.5 GHz | |
RF Amplifier
from AmpliTech
|
| The APTC3-06000850-2K00-D2-V from AmpliTech is a Low Noise Cryogenic Amplifier that operates from 6.0 to 8.5 GHz. It has been designed for cryogenic applications down to 4K, with an industry-low Noise Figure of 25K at +296K and 2K at 4K case temperatures across the band. It provides a more than 40 dB of gain with a noise figure of less than 0.029 dB (at 4 K) and has a P1dB of -6 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz Ultra-Portable Ruggedized Rubidium Oscillator | |
Rubidium Oscillator
from Safran Electronics & Defense
|
| The mRO-50 Ruggedized Oscillator from Safran is a Robust Low SWaP-C Mini-Rubidium Oscillator with a frequency of 10 MHz. This ruggedized oscillator has been designed to meet the latest military and aerospace requirements where time stability and power consumption are critical. It has a wide-range operating temperature from -40°C to 80°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ultra-Low Jitter Crystal Oscillator from 20 to 50 MHz | |
XO
from Dynamic Engineers
|
| The XO2520BL-ULJ_CMOS from Dynamic Engineers is an Ultra-Low Jitter Crystal Oscillator that operates from 20 to 50 MHz. It provides a CMOS output waveform (45-55% duty cycle) with a frequency stability of ±100 ppm. This crystal oscillator has a start-up time of less than 5 ms and a rise/fall time of 1.5 ns. It requires a DC supply of 1.5/2.5/3.3 V and consumes less than 10 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 x 10 mm HF RFID Smart Label Solution | |
RFID Tag
from SAG
|
| The HF Smart Label from SAG is an RFID smart label solution for confined spaces. This miniature smart label is based on the NXP ICode SLIX RFID chip with a UID of 64 bits and a user memory of 896 bits. It measures 10 x 10 mm and has an etched copper antenna. This smart label has an anti-collision function that allows multiple labels to be read simultaneously by a single RFID reader. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-in-line Amplified Noise Modules from 100 Hz to 2 GHz | |
Noise Source
from Noisecom
|
| The NC2000 Series from Noisecom are Dual-Inline Amplified Noise Modules that operate from 100 Hz to 2 GHz. They have a crest factor of 5:1 and a high-end roll-off of 6 dB per octave. These noise modules are ideal for providing high-level noise output while mounted on a circuit board. They are ideal for dither circuitry for A/D converters, communications jamming, gain-bandwidth product testing and built-in test equipment (bite) applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-PIM RF Cable Load from 350 to 5925 MHz | |
Termination
from Microlab
|
| The TK-660ME from Microlab is an RF Cable Load that operates from 350 to 5925 MHz. It can handle an average input power of 60 W and has a VSWR of less than 1.3:1. It caters to C-band and LAA applications where low passive intermodulation (PIM) termination is required. This RoHS-compliant termination can be used with Microlab’s 2 x 2 and 4 x 4 hybrid combiners for low PIM performance in small cell radios and DAS infrastructures. |
| |
Download Datasheet
Product Details | |
|
|
| Featured Article by Micro Harmonics Corporation | | Cryogenic Faraday Rotation Isolators | | Faraday rotation isolators designed for room temperature operation do not work well at cryogenic temperatures. The primary cause is temperature-dependent ferrite magnetization. Figure 1 shows measured data for a WR-10 Micro Harmonics isolator designed for room temperature operation. Click here to learn more. | | | |
|
|
| Top-Side Cooled RF Power Amplifier for 5G Infrastructure from 3300 to 3670 MHz | |
RF Amplifier
from NXP Semiconductors
|
| The A5M34TG140-TC from NXP Semiconductors is a Doherty Power Amplifier Module that operates from 3300 to 3670 MHz. It is based on NXP's new top-side cooling technology that helps radio designers create thinner, lighter 5G radio units while reducing design and manufacturing complexities. This 8 W module series is designed for massive MIMO radios covering 3.3 GHz to 3.8 GHz — typically 32T32R (200 W) or 64T64R (320 W) radios. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wi-Fi HaLow SoC from 750 to 950 MHz | |
Wireless SoC
from Newracom
|
| The NRC7394 from Newracom is a Wi-Fi HaLow SoC (System on Chip) that operates from 750 to 950 MHz. It delivers a data rate of up to 15 Mbps and is compliant with the IEEE 802.11ah Wi-Fi HaLow specification. This SoC has an ARM Cortex-M3 CPU for Wi-Fi and customer applications with a 32 KB boot ROM, 1088 KB system SRAM, 16 KB XIP with cache and a retention memory of 48 KB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Band Wi-Fi 6/6E and Bluetooth 5.4 Modules for IoT Applications | |
RF Module
from u-blox AG
|
| The MAYA-W3 Series from u-blox are Host-Based Wi-Fi 6/6E and Bluetooth 5.4 Modules that are designed for IoT applications. They are available in several variants, offering Wi-Fi 6, Wi-Fi 6E, tri-band, dual-band, and single-band configurations. These modules provide SISO Wi-Fi 6/6E operation over a channel bandwidth of 20 MHz, improved network availability in dense Wi-Fi environments, and multi-user MIMO. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5/6 GHz Wi-Fi 7 and Bluetooth 5.4 Combo Module | |
RF Module
from MediaTek
|
| The Filogic 360 from MediaTek is a 2.4/5/6 GHz Wi-Fi 7 + Bluetooth 5.4 Combo Module. It has a bandwidth of 160 MHz and delivers a maximum throughput of 2.9 Gbps (Wi-Fi 7) using selectable 2x2 triple-band operation and Wi-Fi 7 technologies such as 4096-QAM, MLO, and MRU. This module utilizes Wi-Fi 7 MRU and Preamble Puncture technologies to achieve exceptional performance even in busy network environments that experience channel interference. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-mode 4G-LTE Cat 4 Module | |
Cellular Module
from Fibocom
|
| The SC228 from Fibocom is a Multi-mode 4G LTE Cat 4 Module. It supports global 4G LTE bands, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0 BR/EDR/BLE and global GNSS positioning systems including GPS, GLONASS, BeiDou, Galileo and QZSS. This module delivers a downlink data rate of up to 150 Mbps (LTE-FDD) and an uplink data rate of up to 75 Mbps (LTE-FDD). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Rugged Downconverter with an RF Frequency from 1.5 to 18 GHz | |
Down Converter
from Mercury Systems
|
| The RFX-3190 from Mercury Systems is an RF Downconverter that converts an input frequency (RF) from 1.5 - 18 GHz to an output frequency (IF) from 0.5 to 2.5 GHz. It provides a gain of 30 dB (gain adjustment range of 20 dB) with a noise figure of 12 dB and image rejection of more than 60 dB. This downconverter has a tuning resolution of 10 kHz (optional finer resolutions) and a tuning speed of 2 ms. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Embedded GNSS/GPS Antennas from 1575.42 to 1602 MHz | |
GPS/GNSS Antenna
from Amphenol RF
|
| The ST0543-00-xxx-U Series from Amphenol RF are Embedded GNSS/GPS Antennas that operate from 1575.42 to 1602 MHz. They cover multiple bands (GPS, GLONASS, BeiDou) with a bandwidth from 5 to 19 MHz and provide a peak gain of 2.5 dBi with an efficiency of up to 85%. These RHCP antennas are available in surface-mount packages that measure up to 25.1 x 25.1 x 4.0 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5 GHz Omnidirectional Flexible Planar Antennas for Wi-Fi Applications | |
Antenna
from Laird Connectivity
|
| The Mini NanoBlade Flex Series from Laird Connectivity are Dual-band Flexible Planar Antennas that operate from 2.4 to 2.5 GHz and 4.9 to 5.875 GHz. These vertically polarized omnidirectional antennas provide a peak gain of 3.4 dBi and have a VSWR of less than 2.0:1. They can be embedded in space-sensitive applications and are specifically designed to be embedded inside devices for aesthetically pleasing integration. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged, Linearly-Polarized Dual-Ridge Horn from 0.8 to 12 GHz | |
Horn Antenna
from Microwave Vision Group
|
| The SH800 from Microwave Vision Group is a Dual-Ridge Horn that operates from 0.8 to 12 GHz. This linearly polarized horn provides a gain of up to 15 dBi and has a VSWR of less than 2.5:1. It has a unique design that prevents the excitation of unwanted higher-order modes in the aperture and delivers a well-defined smooth radiation pattern throughout the operational bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10-Port Sector Antenna from 694 to 3800 MHz | |
Base Station Antenna
from CommScope
|
| The 10P-4L6M-D5 from CommScope is a 10-Port Sector Antenna that operates from 694 – 960 MHz and 1695 – 2690 MHz. This ±45° polarized antenna provides a gain of up to 17.8 dBi and has a VSWR of 1.50:1. It has a horizontal beam width of up to 70°, a vertical beamwidth from 5.3 to 8.1° and a beam tilt from 2 to 12°. |
| |
Download Datasheet
Product Details | |
|
|
|
| Vehicle-Mounted Driveaway Satellite Terminal from 7.25 to 31 GHz | |
SATCOM Terminal
from DataPath
|
| The CCT120-DA from DataPath is a Driveaway Terminal that operates from 7.25 to 21.2 GHz (Rx) and 7.9 to 31 GHz (Tx). It delivers an output power of 60 W (X band), has an EIRP of 54.2 dBW (X band) and a G/T (gain-to-noise-temperature) of 15.7 dB/K (X band). This terminal has an azimuth range of ±175° and an elevation range from 10° to 90°. It is available in a vehicle-mountable enclosure and is ideal for news crews, first responders, industrial sites, and military applications. |
| |
Download Datasheet
Product Details | |
|
