| New RF and Microwave Products this Week . |
|
|
|
|
|
|
|
| 8-Port Vector Network Analyzer from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SN5090-8 from Copper Mountain Technologies is an 8-Port Vector Network Analyzer that operates from 300 kHz to 9 GHz. This VNA is an organic extension of the Compact VNA solutions offered by CMT. It enables the full complexity of VNA measurements, a streamlined calibration process, and reduced test times. |
| |
Download Datasheet
Product Details | |
|
|
|
| YIG Based Multi-Channel RF Signal Synthesizers from 10 MHz to 40 GHz | |
Frequency Synthesizer
from Holzworth Instrumentation
|
| The HSY Series from Holzworth are YIG-based RF Signal Synthesizers that operate from 10 MHz to 3/6/12/24/40 GHz. They are available in 1, 2, 3 or 4 channel options, with each channel having an accurate dynamic range from -110 to +20 dBm. The synthesizers have a frequency step size of 0.001 Hz, a phase offset resolution of 0.1º, and a switching speed of less than 10 ms. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Wirewound Ceramic Chip Inductors from 1.8 to 500 nH | |
RF Inductor
from Coilcraft
|
| The 0805HT Series from Coilcraft are Wirewound Ceramic Chip Inductors with inductance values from 1.8 to 500 nH. They have a Q-factor of 55 (at 1.5 GHz), a self-resonant frequency (SRF) of 11.5 GHz, and a DC resistance (DCR) of less than 3.2 Ohms. These inductors have a high Q-factor compared to non-wirewound inductors, especially at high frequencies. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-GHz Low-Power LoRa SiP (System-in-Package) | |
RF Module
from Microchip Technology
|
| The ATSAMR34J18 from Microchip Technology is a Sub-GHz LoRa System-in-Package (SiP) that operates from 137 to 1020 MHz. It combines an ultra-low power microcontroller unit (MCU) with a UHF transceiver communication interface in a single chip-down package. This SiP consists of a 32-bit ARM Cortex-M0+ processor, an integrated LoRa technology transceiver, a frequency synthesizer, a memory unit (256 KB of flash and 40 KB of SRAM), ADCs, voltage regulators, timers, event controllers, bus matrix, and five serial communication interfaces. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Scientific Microwave Corp. | | WRD200 High-Power Coaxial Circulator | | The WRD200 Coaxial Circulator from Scientific Microwave Corporation (SMC) operates from 2-4 GHz suitable for High-Power radar applications. This Double-Ridge unit handles an average power of 500W, with a 14 dB return loss and 13.5 dB isolation. Click here to learn more. | | | |
|
|
| 2.4 GHz Bluetooth Low Energy 5.3 Module with Integrated Chip Antenna | |
RF Module
from STMicroelectronics
|
| The STM32WB1MMC from STMicroelectronics is a 2.4 GHz Bluetooth Low Energy (LE) 5.3 Module. It has an integrated chip antenna with an option for an external antenna and an integrated IPD for exceptional and reliable antenna matching. This antenna has built-in security features, such as secure firmware installation (SFI) for radio stack, PKA, AES 256-bit, RNG, PCROP, CRC, 96-bit UID and the possibility to derive 48-bit UEI. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Sub-GHz LoRa Radio Transceiver from 150 to 960 MHz | |
RF Module
from Semtech
|
| The SX1268 from Semtech is a Sub-GHz LoRa Radio Transceiver that operates from 150 to 960 MHz. It has been designed to comply with the physical layer requirements of the LoRaWAN specification released by the LoRa alliance. This radio is suitable for systems targeting compliance with radio regulations such as ETSI EN 300 220, FCC CFR 47 Part 15, China regulatory requirements, and the Japanese ARIB T-108. |
| |
Download Datasheet
Product Details | |
|
|
|
| Planar Monopole Antennas from 5.85 to 8.25 GHz for UWB Applications | |
Antenna
from Laird Connectivity
|
| The NanoUWB Series from Laird Connectivity are Planar Monopole Antennas that operate from 5850 to 8250 MHz. These linearly-polarized antennas provide a peak gain of up to 3.9 dBi with an efficiency of more than 64% and have a VSWR of less than 2.5:1. They have been designed to operate with Laird’s Sera NX040 UWB module and include a rigid monopole design that supports UWB implementations. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Surface-Mount Planar Lowpass Filter with Passband from DC to 12.8 GHz | |
Low Pass RF Filter
from Smiths Interconnect
|
| The 3LPFX-12800-M from Smiths Interconnect is a Planar Lowpass Filter with a cutoff frequency of 12.8 GHz. It can handle an input power of 1 W, has a passband insertion loss of less than 1.5 dB and provides a stopband rejection of 40 dBc (@18.9 to 31.2 GHz). This X-Band filter leverages thin film process technology on various dielectric substrates and is designed for use in harsh environments. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5 kW GaN Solid-State Transmitter from 9 to 10 GHz | |
RF Amplifier
from RFHIC
|
| The RRT901005K0-57 from RFHIC is an X-Band Transmitter that operates from 9 to 10 GHz. It delivers a pulsed output power of more than 5 kW with a gain of 57 dB. The amplifier has a duty cycle of up to 10%, a pulse width range from 1 to 100 us and a rise/fall time of less than 100 ns. It has a VSWR of under 2:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Weatherproof RF Receiver from 9 kHz to 8 GHz for Spectrum Monitoring | |
RF Spectrum Analyzer
from CRFS
|
| The RFeye Node 40-8 from CRFS is a purpose built RF receiver for spectrum regulators that combines high performance spectrum monitoring with a rugged form factor at an affordable price. It provides real-time spectrum operations and is low in Size, Weight, and Power (SWaP) making it easy to deploy where it is needed. The receiver has an operating frequency from 9 kHz to 8 GHz and a sampling rate of 62.5 MS/s I&Q. |
| |
Download Datasheet
Product Details | |
|
|
|
| Electromagnetic Analysis Tool for Predicting Radar Cross Sections | |
Software
from Remcom
|
| XGtd from Remcom is a Ray-Based EM Simulation Software for assessing the effects of a vehicle or vessel on antenna radiation, predicting coupling between antennas and predicting radar cross section (RCS). It incorporates features such as large platform simulations, ray path visualization, XFdtd compatibility for higher fidelity antenna patterns, and anechoic chamber simulation. It also includes the full 3D propagation model feature that predicts the paths by which energy travels from the transmitting antenna to the receiving location. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 6-Port SPDT/SP6T Mechanical Switches from DC to 50 GHz | |
RF Switch
from SIGLENT
|
| The SSU5000A Series from Siglent are Mechanical Switches that operate from DC to 50 GHz. The series consists of 1 to 4 independent single-pole double-throw (SPDT) mechanical switches or 1 to 2 single-pole six-throw (SP6T) mechanical switches. These switches provide more than 60 dB of isolation, have a switching time of less than 20 ms, and an insertion loss of 0.6 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Fully-Integrated Ku-Band SATCOM Terminal | |
SATCOM Terminal
from Holkirk
|
| The Scorpion-Lite (MP60L) from Holkirk Communications is a Ku-Band SATCOM Terminal that is designed to provide the user connectivity on most airlines. This fully integrated terminal consists of a block upconverter (BUC), low noise block (LNB), modem, and batteries that have been appropriately selected to meet the ratings in the harshest of environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 125 W Rackmount GaN Power Amplifier from 0.6 to 6 GHz | |
RF Amplifier
from Vectawave Technology
|
| The VBA0660-125 from Vectawave is a High-Power Amplifier that operates from 0.6 to 6 GHz. It delivers an output power of 125 W with a gain of over 51 dB. This amplifier is based on high-performance GaN output stages and utilizes Vectawave proprietary quadrature hybrid combining techniques, minimizing loss for a more efficient solution. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Rugged, High-Temperature RF Cable for Avionics Systems | |
RF Cable
from Carlisle Interconnect Technologies
|
| The 371101 from Carlisle Interconnect Technologies is an RF Cable designed for avionics systems. It is designed to meet the performance and weight demands of all modern aircraft and meets OEM and regulatory requirements for fire safety on passenger aircraft. It uses innovative silver-plated copper-clad aluminum conductors and shields along with laser-markable jacketing for easy identification, high shield effectiveness and signal integrity, and minimal attenuation. |
| |
Download Datasheet
Product Details | |
|
|
|
| SMA-to-SMPM Coaxial Adapters from DC to 26.5 GHz | |
Between Series RF Adapter
from Cinch Connectivity Solutions
|
| The 134-1001-00X from Cinch Connectivity Solutions are SMA-to-SMPM Between Series RF Adapters that operate from DC to 26.5 GHz. They have a VSWR of less than 1.25:1 and are designed to provide high-quality signal transmission from one connector series to another. They are fully matched to 50 ohms on both sides. |
| |
Download Datasheet
Product Details | |
|
