| Featured Products this Week . |
|
|
| Portable 1-Port Vector Network Analyzer from 85 MHz to 14 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The R140B from Copper Mountain Technologies is a 1-Port Vector Network Analyzer that operates from 85 MHz to 14 GHz. It supports linear, log and segment sweeps with up to 100,001 measurement points per sweep and a measurement time of 170 µs per point. This VNA has a dynamic range of 112 dB (85 – 4.8 GHz) and a directivity of 42 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 70 W GaN-Based Solid-State Power Amplifier from 2 to 8 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP1146A from Exodus Advanced Communications is a GaN-based SSPA that operates from 2 to 8 GHz. This class AB amplifier delivers a saturated output power of more than 70 W with a gain of 48 dB. It has 2-tone intermodulation (IMD) of -30 dBc, harmonics of -20 dBc, and spurious of -60 dBc. The amplifier requires a DC supply of 32 V and draws 14 A of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 W Microwave Power Amplifier Module from 6 to 18 GHz for Military Applications | |
RF Amplifier
from dB Control
|
| The dB-4127 from dB Control is a Microwave Power Module (MPM) that operates from 6 to 18 GHz. It delivers a CW/pulse output power of 200 W with 53 dB of gain and has a pulse repetition frequency of up to 10 kHz (in pulsed mode). This amplifier has an RF signal path that consists of a solid-state amplifier and a vacuum power booster. The power supply topology uses proprietary low-noise, high-efficiency designs to operate the RF signal path. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| GaAs Double Balanced MMIC Mixer from 15 to 50 GHz | |
RF Mixer
from Analog Devices
|
| The ADMV1550 from Analog Devices is a GaAs Double Balanced Mixer MMIC with an RF/LO frequency from 15 to 50 GHz and an IF frequency from DC to 20 GHz. It can be used either as an upconverter or a downconverter, and provides an RF-to-IF isolation of 45 dB and an LO-to-RF/LO-to-IF isolation of 35 dB. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Scientific Microwave Corp. | | WRD200 High-Power Coaxial Circulator | | The WRD200 Coaxial Circulator from Scientific Microwave Corporation (SMC) operates from 2-4 GHz suitable for High-Power radar applications. This Double-Ridge unit handles an average power of 500W, with a 14 dB return loss and 13.5 dB isolation. | | | |
|
|
| High Reliability, Air Core Power Inductors 33 to 257 nH | |
RF Inductor
from Coilcraft
|
| The 2014VS Series from Coilcraft are High Frequency Power Inductors with inductance values from 33 to 257 nH. These air core inductors can handle up to 57 A of current with no core loss and have Q factors up to 230 (400 MHz). They are available in packages that measure 19.56 x 11.40 x 13.60 mm with RoHS-compliant tin-silver over copper terminations. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 V, 750 mA Bias Tee from 50 kHz to 26.5 GHz | |
Bias Tee
from Inmet by Spectrum Control
|
| The 8810SMF2-26 from Inmet by Spectrum Control is a Bias Tee that operates from 50 kHz to 26.5 GHz. It can regulate a DC supply of 25 V and a DC current of up to 750 mA. This bias tee has an insertion loss of less than 3 dB (18 – 26.5 GHz), provides an isolation (RF to bias port) of 30 dB, and has a VSWR of less than 1.80:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| 63 dB USB-Controlled Programmable Attenuator from 0.2 to 8.4 GHz | |
RF Variable Attenuator
from JFW Industries
|
| The 50P-2107 from JFW Industries is a Solid-State Programmable Attenuator that operates from 200 to 8400 MHz. It provides an attenuation of up to 63 dB with step sizes from 0.5 to 32 dB and has an attenuation accuracy of ±1.00 dB. This attenuator can handle an input power of +24 dBm, has an insertion loss of less than 4.2 dB, and a switching speed of less than 1 µs. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bandpass Filter MMIC with Passband from 10.5 to 13.15 GHz | |
Band Pass Filter
from AmpliTech
|
| The AGM-010 from AmpliTech is an MMIC Band Pass Filter with a passband from 10.5 to 13.15 GHz. It can handle an input power of 20 dBm (0.1 W) and has an insertion loss of 2.9 dB in the passband. This 50-ohm filter provides over 30 dB of rejection above and below the passband. It is available as a bare die that measures 1.00 x 0.750 x 0.1 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Biased Limiter with Low Noise Amplifier from 1 to 2 GHz | |
RF Amplifier
from Quantic PMI (Planar Monolithics)
|
| The PLNA-9-1G2G-20-SMF from Quantic PMI is a Biased Limiter followed by a Low-Noise Amplifier (LNA) that operates from 1 to 2 GHz. It can handle a CW input power of 2 W, provides a gain of 9 dB, and has a noise figure of less than 4.5 dB. This LNA requires a DC supply of +6 V and consumes less than 200 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Phase Shifter with Digital Step Attenuator from 6.025 to 7.525 GHz | |
Digital Phase Shifter
from pSemi, A Murata Company
|
| The PE44951 from p-Semi is a 2-way Phase Shifter that operates from 6.025 to 7.525 GHz. It has digitally controlled step attenuators and provides a phase shift range of 357°. This phase shifter is manufactured on pSemi’s UltraCMOS® process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, which features high compactness, excellent isolation, and an insertion loss of 8.5 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G NR + Wi-Fi 6E + Bluetooth 5.2 SoC for Industrial Applications | |
Wireless Chipset
from Qualcomm
|
| The QCM4490 from Qualcomm is a 5G NR + Wi-Fi 6E System on Chip (SoC) with added support for Bluetooth 5.2 connectivity. It provides advanced features that are required by industrial handheld, industrial computing, and other IoT devices. This module provides significant reductions in latency and increased responsiveness for latency-sensitive applications (voice, video). |
| |
Download Datasheet
Product Details | |
|
|
|
| Cryogenic Low Noise Amplifier from 1 to 12 GHz | |
RF Amplifier
from Cosmic Microwave Technology, Inc.
|
| The CITCRYO1-12D from Cosmic Microwave Technology is a Cryogenic Low Noise Amplifier that operates from 1 to 12 GHz. It provides a gain of 35 dB with an average noise figure of 0.05 dB and a noise temperature of less than 3 K (at 12 K). This LNA requires three separate DC supplies and provides usable gain at DC power as low as 10 mW. It is available in a module with SMA-female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB-Powered Amplified Switch Filter Bank from DC to 8000 MHz | |
Switched Filter Bank
from Lexatys
|
| The 350-02874-0001 from Lexatys is an Amplified Switch Filter Bank that operates from DC to 8000 MHz. It consists of an amplifier, 8 filtered channels, a bypass channel, and a default safety load channel. Each of the 8 channels and the bypass channel can be selected to have a through-path, an amplified path, or an attenuated path which can be enabled as desired. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G mmWave RF Flex-to-Board Connectors up to 25 GHz | |
RF Connector
from MOLEX
|
| The 5G25 Series from Molex are RF Flex-to-Board Connectors with excellent signal integrity (SI) performance for high-speed, extreme RF applications, along with the robust mating features and PCB real-estate space savings needed in compact 5G mobile and other communication devices. These connectors operate up to 25 GHz and allow phone makers, RF module developers, and chipset makers to leverage industry-leading 5G mmWave connectivity technologies. |
| |
Download Datasheet
Product Details | |
|
|
|
| ETSI and FCC Regulatory Test System for 2.4/5 GHz Wireless Devices | |
Conformance Test System
from Rohde & Schwarz
|
| The R&S®TS8997 from Rohde & Schwarz is a Regulatory Test System for 2.4/5 GHz wireless devices. It supports compliance tests according to the ETSI EN 300328 V1.8.1 standard (2.4 GHz band) and the ETSI EN 301893 V1.7.1 standard (5 GHz band) along with FCC §15.247 and FCC §15.407 test cases. This system employs the R&S®OSP-B157W8 PLUS 7.5 GHz module with up to eight channels at the core of the system and uses a printed RF switchboard in solid-state relay (SSR) architecture. |
| |
Download Datasheet
Product Details | |
|
|
|
| Phase-Stable and Flexible Cable Assemblies from DC to 50 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The StabilityFlex™ from Maury Microwaves are Phase-Stable Cable Assemblies that operate from DC to 50 GHz. They are available in 24", 36", 48", and 60" lengths (custom lengths available) with N-type, SMA, 2.92mm and 2.4mm connectors. These ultra-flexible cable assemblies have a phase stability vs flexure of ±4°, amplitude stability vs flexure of ±0.05 dB, and provide shielding of more than 100 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged 40 GHz Intelligent RF Receiver | |
RF Spectrum Analyzer
from CRFS
|
| The RFeye Node 100-40 from CRFS is a Rugged Intelligent Wideband Receiver that operates from 9 kHz to 40 GHz. The receiver is a complete spectrum monitoring and geolocation system designed for remote deployment both indoors and outdoors and in hostile environments. Packaged in a compact, rugged and weatherproof housing, it has been optimized for size, weight and power (SWaP) and is simple to connect to power and network. |
| |
Download Datasheet
Product Details | |
|
|
|
| 300/400/500 W X-Band GaN SSPA BUCs from 7.9 to 8.4 GHz | |
Block Up Converter
from Advantech Wireless Technologies
|
| The Cascade-X Line of BUCs from Advantech Wireless are X-Band GaN SSPA BUCs that up-convert an input frequency from 950 - 1450 MHz to an output frequency from 7.9 - 8.4 GHz. They are available in multiple output power configurations of 300/400/500 W with a gain of more than 70 dB. These BUCs feature RF power detection, mute control, over temperature shutdown, summary alarm, and SNMP monitoring. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 78-Ohm MIL-STD-1553 RF Terminations from DC to 500 MHz | |
Termination
from Fairview Microwave
|
| The FMTR10-06403-0XX Series are RF Terminations that operate from DC to 500 MHz. They are designed for MIL-STD-1553 standard data bus couplers and relay devices. These 78-ohm terminations are manufactured with TRB 3-Slot connectors and are available with various bayonet coupling options that are suitable for both 3-lug and 4-lug jacks. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 GHz Dual-Carrier, Point-to-MultiPoint Beamforming Base Station Up to 1.5 Gbps | |
Microwave Backhaul Radio Links
from Radwin
|
| The RADWIN NEO DUO is a low cost Dual-Carrier, Point-to-MultiPoint Beamforming Base Station that operates in the 5 GHz band. It has an integrated bi-directional (uplink and downlink) beamforming antenna that enables frequency reuse. This Point to MultiPoint solution provides best-in-class radio interference mitigation and wide coverage, superior to Access Points with a horn or uplink-only beamforming antenna. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
