| New RF and Microwave Products this Week . |
|
|
|
|
|
|
|
| Surface-Mount Low-Noise Amplifier from 400 to 6000 MHz | |
RF Amplifier
from Skyworks Solutions
|
| The SKY67189-396LF from Skyworks is a Low-Noise Amplifier that operates from 400 to 6000 MHz. It provides a gain of up to 18 dB with a noise figure of less than 1.17 dB and has an output P1dB of 19.2 dBm. This amplifier is ideal for 2G/3G/4G/5G TDD & FDD systems, active antenna array & massive MIMO, receive LNA for micro-cell, macro-cell, & small-cell base stations. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wi-Fi 6/6E Front End Module from 5935 to 7125 MHz | |
Front End Module
from Qorvo
|
| The QPF4658 from Qorvo is a 6 GHz Wi-Fi 6/6E (802.11ax) Front-End Module that operates from 5945 to 7125 MHz. It integrates a power amplifier (PA), single pole two throw switch (SP2T), and bypassable low noise amplifier (LNA). This FEM includes a logarithmic voltage detector for application feedback and features die-level filtering for 2nd and 3rd harmonics. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Port Compact USB VNA from 300 kHz to 1.3 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The TR1300/1 from Copper Mountain Technologies is a 2-Port lab-grade vector network analyzer that operates from 300 kHz to 1.3 GHz. This compact computer controlled VNA has a dynamic range of 130 dB and can measure up to 100,001 measurement points. It includes an RF measurement module and TR software application which runs on Windows or Linux operating system on a PC, laptop, tablet, or x86 board computer connecting to the measurement hardware via USB interface. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Software Defined Radio from 5 to 20 GHz | |
Software Defined Radio
from Vesperix Corporation
|
| The VXSDR-20-160 from Vesperix Corporation is a Microwave Software Defined Radio (SDR) that operates from 5 to 20 GHz. It has a 14-bit ADC with a sample rate of 160 MSPS (million samples per second) and a 16-bit DAC with a sample rate of 160 MSPS. This is similar to other commercial software defined radios, but covers the upper part of C band, all of X and Ku bands, and the lower part of K band (it's usable to 22 GHz). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Software-Defined Radio from 1 MHz to 18 GHz with Al/ML Processing | |
Software Defined Radio
from Epiq Solutions
|
| The Matchstiq™ X40 from Epiq Solutions is a Multi-Channel Software-Defined Radio (SDR) that operates from 1 MHz to 6 GHz (low-frequency configuration) and 1 MHz to 18 GHz (high-frequency configuration). It combines an RF frontend with multiple digital transceiver channels, a high-performance Nvidia Orin NX 16G GPU/CPU, and an AMD Zynq Ultrascale+ FPGA. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 18 GHz SMA (Female) Straight PCB Connector | |
RF Connector
from HUBER+SUHNER
|
| The 82_SMA-50-0-21/111_N from HUBER+SUHNER is an 18 GHz SMA (female) straight PCB connector. It uses Copper Beryllium alloy for center contact and outer conductors, employs a PTFE insulator and has a Copper Beryllium body. This 50-ohm connector meets the IEC 60169-15, MIL-STD-348A/310 and CECC 22110 standards and can withstand 500 mating cycles with an operating temperature range of -65°C to +165°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 W GaN Power Amplifier from 23 to 27.5 GHz | |
RF Amplifier
from mmTron Inc
|
| The TMC152 from mmTron is a GaN Power Amplifier that operates from 23 to 27.5 GHz. It delivers a saturated output power of 40 dBm (10 W) with a gain of 23 dB and has a noise figure of 7 dB. This amplifier is matched to 50-ohms and eliminates the need for RF port matching. It has bond pads and backside Au-based metallization compatible with ribbon and wedge bonding and high conductivity epoxy and eutectic die attach methods. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Radiation-tolerant MCXOs from 5 to 80 MHz | |
MCXO
from Q-Tech Corporation
|
| The QT2021 Series from Q-Tech are Radiation-Tolerant Microcomputer Compensated Crystal Oscillators (MCXOs) that operate from 5 to 80 MHz. They provide a Sinewave or HCMOS output with a phase noise of -110 dBc/Hz (at 10 Hz offset) and have a frequency stability of ±30 ppb (vs. temperature). These MCXOs use high stability overtone SC-cut crystal with microprocessor-controlled compensation circuitry. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 20 W, 2-Way Power Divider/Combiner 4.9 to 6 GHz | |
Power Divider
from MECA
|
| The P2S-5.500WWP from MECA is a 2-Way Power Divider/Combiner that operates from 4.9 to 6 GHz. It can handle an input power of 20 W, has an insertion loss of 0.2 dB, and provides an isolation of 25 dB. This power divider/combiner has an amplitude balance of ±0.1 dB and a phase balance of ±2°. It is available in Aluminum housing that measures 1.68 x 1.68 x 0.75 inches and has SMA-female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| GaAs pHEMT Low Noise Amplifier MMIC from 3.5 to 8.2 GHz | |
RF Amplifier
from AmpliTech
|
| The AGLNA035082 from AmpliTech is a pHEMT Low Noise Amplifier (LNA) MMIC that operates from 3.5 to 8.2 GHz. It provides 26.5 dB of gain with a noise figure of 0.9 dB and has a saturated output power of 12 dBm. This LNA requires a DC supply of +5 V and consumes 25 mA of current. It is available as a 50-ohm internally matched die that measures 1.75 x 1.25 x 0.10 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 800 W GaN Solid-State Power Amplifier from 9.3 to 9.7 GHz | |
RF Amplifier
from RFHIC
|
| The RRM9397800-59A from RFHIC is a Solid-State Power Amplifier that operates from 9300 to 9700 MHz. It delivers an output power of 800 W with a gain of 59 dB and has an efficiency of 20%. The amplifier has a duty cycle of up to 10% and a pulse width of 100 us. It is built using RFHIC’s cutting edge gallium-nitride (GaN) on SiC HEMT technology providing excellent thermal stability, high breakdown voltage, and efficiency. |
| |
Download Datasheet
Product Details | |
|
|
|
| 800 W Class A/AB Solid State Power Amplifier from 1 to 6 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2030-800-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 1 to 6 GHz. It delivers a CW/Pulsed saturated output power of more than 800 W with a power gain of over 59 dB and a gain adjustment range of over 20 dB. This amplifier has a class A/AB linear design with spurious emissions of better than -60 dBc and harmonics of -20 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Square Air Core Inductors from 90 to 300 nH | |
RF Inductor
from Coilcraft
|
| The 2222SQ Series from CoilCraft are Square Air Core Inductors with inductance values from 90 to 300 nH. They have a Q factor of up to 230 @400 MHz with very tight inductance tolerances, making them suitable for narrowband RF amplifier matching and tuning applications. These air-core inductors do not use a magnetic core, resulting in the high Q and the lowest possible losses for high-frequency applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Flanged Termination from DC to 7 GHz | |
Termination
from Inmet by Spectrum Control
|
| The 7ANT300-25 from Inmet by Spectrum Control is a Flanged Termination that operates from DC to 7 GHz. It can handle up to 25 Watts of average power and can operate at a wide temperature range from -55 to 150 Degrees Celsius. This termination is matched to 50 ohms and has a VSWR of less than 1.35:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from 0.5 to 40 GHz | |
RF Amplifier
from Quantic PMI (Planar Monolithics)
|
| The PEC-30-500M40G-20-12-292FF from PMI is low noise amplifier that operates from 0.5 to 40 GHz. It has a gain of 30 dB with a flatness of ±2.5 dB and a noise figure of 5.5 dB. The LNA provides a saturated output power of up to 23 dBm while operating over a 12-15 V supply and drawing under 350 mA of current. It is available in a module that measures 1.37 x 1 x 0.6 inches with 2.92 mm female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| LTE Cat 1.bis Module for Global IoT and M2M Applications | |
Cellular Module
from Cavli Wireless
|
| The C16QS Series from Cavli Wireless are LTE Cat 1.bis Modules that comply with 3GPP release 14 specifications. They are available in variants with support for cellular bands from EMEA/APAC, NA, LA, AN, and global, delivering a downlink data rate of 10 Mbps and an uplink data rate of 5 Mbps. This module is based on the Cavli Hubble Device and connectivity management platform and has an integrated Hubble eSIM. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
