| Featured Products this Week . |
|
|
| 15 W Rackmount Solid-State Power Amplifier from 18 to 40 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2145A-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 40 GHz. It delivers a CW/pulsed output power of 15 W with a power gain of more than 40 dB and has a gain adjustment range of 20 dB. This amplifier has a Class A/AB linear design and is ideal for EMI/RFI, lab, CW/Pulse, and all communication applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 W GaN Pulsed Amplifier from 9.3 to 9.5 GHz | |
RF Amplifier
from RFHIC
|
| The RRM9395200-56A from RFHIC is a GaN-Based Pulsed Amplifier that operates from 9.3 to 9.5 GHz. This amplifier provides a pulsed output power of 200 watts (100µs, 10% duty cycle) with a power gain of over 55 dB and has a PAE of 20%. It requires a supply voltage of 50 volts and is available in a module with SMA connectors. This amplifier is ideal for use in marine and weather radar systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Way Reactive Power Divider/Combiner from 0.5 to 8.4 GHz | |
Power Divider
from JFW Industries
|
| The 50PD-927 from JFW Industries is a 4-way Reactive Power Divider/Combiner that operates from 0.5 to 8.4 GHz. It can handle an input power of 10 W (as a divider) and 0.25 W (as a combiner) at each port. This power divider/combiner has an insertion loss of less than 2.3 dB and provides more than 16 dB of isolation. It has amplitude tracking of ± 0.6 dB and a phase tracking of ±6°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 dB Fixed Attenuator from DC to 50 GHz | |
Fixed Attenuator
from MECA
|
| The 669-20-1 from MECA is a Fixed Attenuator that operates from DC to 50 GHz. It provides an attenuation of 20 dB with an accuracy of ±2 dB. The attenuator can handle an average input power of up to 0.5 W and has a VSWR of less than 1.75:1. It is available as a connectorized module that measures 1.12 x 0.312 inches and has 2.4mm (male/female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 18 GHz SMA (Female) Straight Bulkhead Cable Jack Connector | |
RF Connector
from HUBER+SUHNER
|
| The 24_SMA-50-2-116/111_N from HUBER+SUHNER is an 18 GHz SMA (female) Straight Bulkhead Cable Jack. It uses Copper Beryllium alloy for center contact, outer conductors and body and employs a PTFE insulator. This 50-ohm connector meets the IEC 60169-15, MIL-STD-348A/310 and CECC 22110 standards and can be fitted with GX-02272, RG-174/U and RG-316/U cables. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Profile Ceramic Core Chip Inductors from 1 to 56 nH | |
RF Inductor
from Coilcraft
|
| The 0603CT Series from Coilcraft are Low-Profile Ceramic Core Chip Inductors available in inductance values from 1.0 to 56 nH. They have Q-factors up to 95, a self-resonant frequency (SRF) of 16.0 GHz and a DC resistance of less than 0.700 ohms. These inductors are available in surface-mount packages that measure 1.63 x 0.84 x 0.61 mm with Tin over Ni over Ag-Pt-glass frit termination. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Real-time Spectrum Analyzer from 100 kHz to 43.5 GHz | |
RF Spectrum Analyzer
from Signal Hound
|
| The SM435C from Signal Hound is a Real-time Spectrum Analyzer that operates from 100 kHz to 43.5 GHz. It has a dynamic range of 110 dB, a sweep speed of 1 THz/sec at 30kHz RBW (using Nuttall windowing), and an SSB phase noise of -138 dBc/Hz@100 kHz offset. This RTSA is designed for remotely-located accurate RF data analysis at the lowest cost possible and includes a 10 Gigabit Ethernet SFP+ port, enabling it to communicate with a PC over long distances using a fiber optic cable. |
| |
Download Datasheet
Product Details | |
|
|
|
| Thin-Film RF Attenuator Chips from DC to 8 GHz | |
Fixed Attenuator
from Spectrum Control
|
| The KPA1020S from Spectrum Control are RF Attenuators that operate from DC to 8 GHz. They are available in attenuation values from 1 to 20 dB with an attenuation accuracy of ±2 dB. These 50-ohm thin-film attenuators are designed to reduce the signal power uniformly at different frequencies, temperatures, and power levels. They can handle an input power of up to 20 W and have a VSWR of less than 1.50:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bandpass Filter with Passband from 8.2 to 10.34 GHz | |
Band Pass Filter
from American Microwave Corporation
|
| The SM-8T-818 OPTION A8429468-1 from American Microwave is a Bandpass Filter with a passband from 8.2 to 10.34 GHz. It can handle an input power of 200 mW, has a passband insertion loss of less than 2.0 dB and a VSWR of better than 1.5:1. This filter is available in a module that measures 4.00 x 1.50 x 0.75 inches with SMA-female input connector and SMA-male output connector. |
| |
Product Details | |
|
|
|
| Non-Blocking 4x4 Solid-State Switch Matrix from 100 kHz to 4 GHz | |
Switch Matrix
from Becker Nachrichtentechnik GmbH
|
| The RSWM-4X4LR from Becker RF is an 4x4 Switch Matrix that operates from 100 kHz to 4 GHz. It has four inputs and four outputs interconnected via a non-blocking matrix where a single input can route to multiple outputs simultaneously. This switch matrix has high channel isolation to ensure that signals in adjacent radio channels do not affect each other. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged RF Shield Box from 20 MHz to 6 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-2270-C from RF Electronics is an RF Shield Box that is designed and developed for WLAN and Wireless Device (Bluetooth, RFID) Testing from 20 MHz to 6 GHz. It has thick RF absorbing that deadens standing waves and reflections and provides over 90 dB of isolation for accurate performance. The box is equipped with shielded power filters for making power connections in the box while still blocking all wireless signals. |
| |
Download Datasheet
Product Details | |
|
|
|
| 0 dB GaAs Attenuator MMIC from DC to 40 GHz | |
Fixed Attenuator
from Marki Microwave
|
| The ATN00-0040PSM from Marki Microwave is a GaAs RF Attenuator MMIC that operates from DC to 40 GHz. This 0 dB attenuator has an attenuation accuracy of 0.2 dB and has a return loss of 27 dB. It is available in a DFN package that measures 2.0 x 1.3 mm and is ideal for low SWaP applications in 5G test equipment, precision characterization, airborne applications, amplitude matching, and high channel count systems. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Passive Equalizer from DC to 20 GHz | |
Gain Equalizer
from Quantic PMI (Planar Monolithics)
|
| The EQL-DC20-10-SFF from Quantic PMI is a Passive Equalizer that operates from DC to 20 GHz. It has an insertion loss of 10 dB at DC and less than 0.75 dB up to 20 GHz. This passive equalizer has a slope of 10 dB (nominal) and a VSWR of 1.8:1. It has a design that allows both forward and reverse measurements to be equivalent. |
| |
Download Datasheet
Product Details | |
|
|
|
| Cost-effective, High-performance, Space-Qualified Master Crystal Oscillator | |
OCXO
from Safran Electronics & Defense
|
| The LNMO from Safran is a Space Qualified Crystal Oscillator with a frequency of 10 MHz (frequencies from 5 to 40 MHz available upon request). It produces an output signal of 7 dBm with an SSB phase noise of -140 dBc/Hz @ 1 kHz offset and frequency stability of ± 1x10-9 over a wide temperature range. The oscillator has a standard warm-up time of 10 minutes and a fast warm-up time of 5 minutes. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 28 dBm Power Amplifier from 18 to 40 GHz | |
RF Amplifier
from Talent Microwave Inc
|
| The TLPA18G40G-38-27 from Talent Microwave is a Power Amplifier that operates from 18 to 40 GHz. It delivers a saturated output power of 28 dBm (~0.63 W) with a gain of 43 dB and a gain flatness of ±2.5 dB. This amplifier requires a DC supply of 12 V and consumes less than 1.2 A. It is available as a module that measures 60 x 50 x 12 mm with 2.92 mm (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB/LAN Average Power Sensors from 50 MHz to 8 GHz | |
RF Power Meter & Sensor
from Boonton
|
| The CPS200 from Boonton is a true average power sensor that can measure power for modulated and CW RF signals from 50 MHZ to 8 GHz. It has a 60 dB dynamic range and carry out 100 measurements per second. The sensor can be controlled via a Windows or Linux computer using USB, LAN or PoE. Each sensor includes all the necessary drivers for programming through SCPI, IVI and LabVIEW. |
| |
Download Datasheet
Product Details | |
|
|
|
| Triaxial Cable with 3-Layers of Shielding from DC to 10 GHz | |
RF Cable
from IntelliConnect
|
| The RG403 from IntelliConnect is a Triaxial Cable that operates from DC to 10 GHz. It has a silver-coated copper-clad steel conductor with a diameter of 0.012 inches and a polytetrafluoroethylene (PTFE) dielectric with a diameter of 0.033 inches. Triaxial cables were developed primarily to reduce noise levels in systems along with providing an isolated ground. |
| |
Download Datasheet
Product Details | |
|
|
|
| Real-time Spectrum Analyzer from 5 to 110 GHz | |
RF Spectrum Analyzer
from Aaronia AG
|
| The SPECTRAN® V6 XPLORER 250XA-110 from Aaronia is a Real-time Spectrum Analyzer that operates from 5 to 110 GHz. It has 1 Rx channel with a real-time bandwidth of 44 MHz and has a DANL of -170 dBm/Hz. This analyzer has a sweep speed of 3 THz/s and this cost-effective RTSA opens up an entirely new application area with its high-frequency operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 GHz Programmable AWGN Noise Generator | |
Noise Generator
from Noisecom
|
| The UFX7000B from Noisecom is a Programmable AWGN Noise Generator that can generate noise signals up to 40 GHz. It incorporates a broadband noise source and noise path attenuator (with a maximum attenuation range of 127 dB in 1 dB steps). This noise generator provides an output power of up to +30 dBm with excellent flatness. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB-Powered Absorptive Solid-State SP4T Switch from 0.1 to 67 GHz | |
RF Switch
from Mini Circuits
|
| The RCS-1SP4T-A673 from Mini Circuits is a Solid-State SP4T Switch that operates from 0.1 to 67 GHz. It has a switching time of 2 ms and provides up to 65 dB of isolation with an insertion loss of less than 12.5 dB. This absorptive switch includes USB HID and Ethernet interfaces to provide easy compatibility with a wide range of software setups and programming environments. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Surface-Mount Low-Noise Amplifier from 400 to 6000 MHz | |
RF Amplifier
from Skyworks Solutions
|
| The SKY67189-396LF from Skyworks is a Low-Noise Amplifier that operates from 400 to 6000 MHz. It provides up to 18 dB of gain with a noise figure of less than 1.17 dB and has an output P1dB of 19.2 dBm. This amplifier provides reverse isolation of up to 30.5 dB and includes internal active bias circuitry that provides stable performance over temperature and process variation. |
| |
Download Datasheet
Product Details | |
|
