| Top Test & Measurement Products in 2023 . |
|
|
|
|
|
|
|
| USB-Powered, Lightweight Vector Signal Generator from 75 MHz to 6 GHz | |
Signal Generator
from Aaronia AG
|
| The V6-VSG240X from Aaronia is a Real-Time Vector Signal Generator that operates from 75 MHz to 6 GHz. It has a real-time bandwidth of 240 MHz and supports all standard signal types (CW, sweep, chirp, pulse, etc.). This signal generator is available with a number of additional software extensions that allow signal sweeping in between 75 MHz to 6 GHz in less than 5 ms or complex IQ vector signal modulation with up to 4096QAM. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| High-Stability Rubidium Signal Generator from 9 kHz to 43.5 GHz | |
Signal Generator
from Anritsu
|
| The MG36271A from Anritsu is an RF/Microwave Signal Generator with a frequency range of 9 kHz to 43.5 GHz. It offers atomic clock frequency stability with an internal rubidium frequency reference option. Alternatively, customers can also get exceptional frequency stability by locking an internal oven-controlled crystal oscillator (OCXO) reference to an external GNSS/GPS signal. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 4-Port VNA from 70 kHz to 220 GHz with Optional Spectrum Analyzer | |
Vector Network Analyzer
from Anritsu
|
| The VectorStar ME7838G4 from Anritsu is a 4-Port Vector Network Analyzer (VNA) that operates from 70 kHz to 220 GHz. It performs measurements utilizing compact mmWave modules with industry-best calibration stability and includes broadband systems with positive raw directivity. This VNA incorporates the Anritsu MA25400A mmWave module which combines Anritsu’s Nonlinear Transmission Line (NLTL) technology in a small, compact high performance mmWave module for measurements up to 220 GHz. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Modular Anechoic Chamber for Shielding up to 40 GHz | |
Anechoic Chamber
from Antenna Systems Solutions S.L
|
| The ASYSHIELD from Antenna Systems Solutions is an Anechoic Chamber. It provides an average shielding effectiveness of up to 60 dB before the installation of the absorbers (can be extended up to 80 dB). The shielded enclosure consists of shielding panels made of two sheets of galvanized steel and the enclosure has excellent resistance to corrosion. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Real-Time Peak USB Power Sensors from 50 MHz to 40 GHz | |
RF Power Meter & Sensor
from Boonton
|
| The RTP5000 Series of USB Power Sensors from Boonton are Real-Time peak power sensors that operate from 50 MHz to 40 GHz (available in 6 GHz, 18 GHz and 40 GHz configurations). They have a dynamic range from -60 dBm to +20 dBm with a measurement rate of 100,000 measurements per second, with no gaps in signal acquisition and zero measurement latency. |
| |
Download Datasheet |
Product Details | |
|
|
| Sponsored by Satellite 2024 | | EXCLUSIVE DISCOUNT FOR SATELLITE 2024 | | SATELLITE is renowned as the premier destination for those seeking to stay at the forefront of the industry. Over four immersive days, we curate a program of executive-level discussions, financial insights, technical content, and visionary keynotes. Click here to learn more. | | | |
|
|
| 1-Port USB Vector Network Analyzer from 1 MHz to 6 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The R60 is a single port USB-powered VNA (Reflectometer) capable of measuring S11 from 1 MHz to 6.0 GHz. It can be operated from any Windows PC or laptop using a USB cable. The R60 provides a wide variety of analysis capabilities, including S11, time-domain with gating, DTF measurements and much more. Collection of metrology-grade S-parameters test results can be achieved manually or through automation in Python, MATLAB, Excel, C++, VB.NET, or LabVIEW. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Portable Spectrum Recording System from 9 kHz to 8/18 GHz | |
RF Spectrum Recording and Playback System
from CRFS
|
| The RFeye® SenS Portable is a Lightweight I/Q Recorder for high-fidelity, long-duration RF recording and signal extraction from 9 kHz to 8/18 GHz. This recorder has a real-time bandwidth of 100 MHz and can store up to 12 hours of spectrum recordings in its internal 25.6 TB SSD. This recorder uses the DeepView software interface from CRFS that allows users to quickly find and extract the required signals. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 3GPP/CTIA/PTCRB-Ready Sub-6 GHz and mm-Wave 5G OTA Testing System | |
Antenna Measurement System
from EMITE Ingenieria
|
| The H300 from EMITE is a 5G OTA Test System that is designed for Sub-6 GHz and mm-Wave frequencies. It consists of a medium-sized anechoic chamber, a Compact Antenna Test Range (CATR) with a 100 x 100 cm serrated precision reflector (15 µm peak-to-peak roughness), a lateral-positioned tower and feed antenna (for frequencies from 3 to 40 GHz). |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| 10 MHz to 26 GHz Real-Time Phase Noise Analyzer | |
Phase Noise Analyzer
from Holzworth Instrumentation
|
| The HA7062D from Holzworth is a real time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It has a real-time engine that covers the full measurement bandwidth with extremely fast measurement speeds to reduce product development time and optimize ATE manufacturing throughput. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 4-Channel Vector Signal Generator from 9 kHz to 8.5 GHz | |
Signal Generator
from Keysight Technologies
|
| The N5186A MXG from Keysight Technologies is a 4-channel Vector Signal Generator with a frequency range from 9 kHz to 8.5 GHz. It delivers an output power of up to +27 dBm with a phase noise of -147 dBc/Hz (at 10 kHz offset) and has a frequency resolution of 1 x 10-5 Hz. This signal generator is capable of generating signals with a modulation bandwidth of 960 MHz. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 50 GHz Multi-probe Spherical Near-field Antenna Measurement System | |
Antenna Measurement System
from Microwave Vision Group
|
| The SG Evo from Microwave Vision Group is a Multi-probe Spherical Near-field Antenna Measurement System for heavy DUTs and high-accuracy applications. It supports frequencies from 400 MHz to 50 GHz and has a unique design that enables unlimited sampling using a precision positioning mechanism in the arch. This eliminates any tilting of the DUT which avoids gravitational deflections of the DUT and azimuth positioner. |
| |
Download Datasheet |
Product Details | |
|
|
| Sponsored by Satellite 2024 | | |
|
|
| mm-Wave Mini-Chamber for OTA Measurements | |
Antenna Measurement System
from Milliwave Silicon Solutions
|
| The MBX33 from Milliwave Silicon Solutions is a mmWave Mini-Chamber that fits on an 8-foot lab bench. Compared to the standard MilliBox line, the MBX33 is composed of 30 Inch cubes to allow for more space inside the chamber. It has 3 instrument bays to place a spectrum analyzer or vector network analyzer on one side and a signal generator or baseband board on the other side below the measurement deck. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Precision Waveguide AWGN Noise Sources from 18 to 110 GHz | |
Noise Source
from Noisecom
|
| The NC5000A Series from Noisecom are AWGN Noise Sources for frequency ranges from 18 to 110 GHz. They feature outstanding stability, fast switching speeds, and have a ripple-free response over standard waveguide bands. These noise sources support calibration in 1 GHz steps, have a noise output rise/fall time of less than 1 µs and a noise output variation (with temperature) of better than 0.01 dB/°C. |
| |
Download Datasheet |
Product Details | |
|
|
|
| High-Accuracy USB Power Meter from 4 kHz to 6 GHz | |
RF Power Meter & Sensor
from Raditeq B.V.
|
| The RadiPower® RPR4006R from Raditeq is a USB Power Meter that operates from 4 kHz to 6 GHz. It combines excellent RMS measurement accuracy over a large dynamic range with high measurement speed. This power meter has a dynamic range of up to 80 dB, a resolution of 0.01 dB and a measurement speed of 5 MS/s (supports dBm and Watt measuring units). |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| RF Diagnostic Test Chamber from 400 MHz to 18 GHz | |
Antenna Measurement System
from Rohde & Schwarz
|
| The R&S DST200 from Rohde & Schwarz is an RF Diagnostic Test Chamber for a frequency range from 400 MHz to 18 GHz. It has been designed for accurate RF testing and analysis during development. This anechoic chamber supports a wide range of radiated test applications for wireless devices and fits on any R&D lab bench, where it can be used during the product design and optimization phase. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| 2-Port Vector Network Analyzer from 100 kHz to 26.5 GHz | |
Vector Network Analyzer
from SIGLENT
|
| The SNA5032A from Siglent is a 2-Port Vector Network Analyzer (VNA) that operates from 100 kHz to 26.5 GHz with a frequency resolution of 1 Hz. It has a dynamic range of 125 dB and a level resolution of 0.05 dB. This 2-port VNA provides instantaneous measurement results of parameters such as Q-factor, bandwidth, and insertion loss, and insights into scattering, differential, and time-domain measurements. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 50 MHz to 6 GHz Vector Signal Generator | |
Signal Generator
from Signal Hound
|
| The VSG60A is a vector signal generator that operates from 50 MHz to 6.0 GHz with a real-time bandwidth of 40 MHz. It has an output amplitude from -55 to 7 dBm and has a number of pre-programmed modulation types inbuilt – these include Wi-Fi, QAM, PSK, CW, Pulse, Multi-tone, and many more. It has an arbitrary I/Q sample rate from 12.5 kSPS to 51.2 MSPS which lets you stream waveforms of virtually any size from your computer. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Modular Microwave Signal Generator from 100 kHz to 40 GHz | |
Signal Generator
from Tabor Electronics
|
| The LSX4091D from Tabor Electronics is a Microwave Signal Generator with a frequency range of 100 kHz to 40 GHz. It provides an output power of 15 dBm with a phase noise of -118 dBc/Hz (at 10 kHz offset, 1GHz frequency) and a frequency resolution of 0.001 Hz. This generator has a switching speed of 20 µs (in-band) and supports FM, AM, Phase modulation, and optional pulse modulation. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Anechoic Chamber from 26 MHz and 18 GHz for Small Test Apparatus | |
Anechoic Chamber
from TDK RF Solutions
|
| The CAC-S™ from TDK RF Solutions is an Anechoic Chamber for conducting measurements between 26 MHz and 18 GHz. It uses a unique EMC absorber installation technique which features fully lined double-layer ferrite tile and IP-045 series absorbers. The ferrite tiles are mounted onto dielectric panels to cover the frequency range from 26 MHz to 1 GHz and by installing TDK IP-045 series resistive absorbers in selected areas of ceiling and walls, the frequency range can be extended up to 18 GHz. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Broadband Portable Signal Generator from 0.5 to 40 GHz | |
Signal Generator
from Vaunix
|
| The BLX-403 Lab Brick from Vaunix is a portable and programmable signal generator that operates from 0.5 to 40 GHz. It has a resolution of 100 Hz, switching time of 5 ms, output power of 10 dBm, and 40 dB of output level control. It has advanced features such as frequency sweeping, internal/external 10 MHz reference, and standard pulse modulation. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Handheld Communications Service Monitor from 1 MHz to 6 GHz | |
Vector Network Analyzer
from Viavi Solutions
|
| The CX100 from VIAVI Solutions is a Handheld Communications Service Monitor (CSM) that operates from 1 MHz to 6 GHz. It is a fully featured radio test solution in a lightweight, rugged, and handheld form factor that is designed for tactical and LMR network technicians working in rugged environments. This CSM includes a 1-port VNA for cable and antenna analysis, a built-in spectrum analyzer, and connectivity to the VIAVI Mobile Tech App to simplify the testing process. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 2-Port Vector Network Analyzers from 10 MHz to 20 GHz | |
Vector Network Analyzer
from Micran
|
| The R4M Series from Micran are Vector Network Analyzers (VNAs) with a frequency range from 10 MHz to 20 GHz. They have a dynamic range of 100 dB and are used to measure the S-parameters of linear 1-port and 2-port devices and various characteristics of electric circuits. These analyzers are useful for analyzing, tuning, testing, monitoring, and manufacturing of high-frequency and microwave devices used in radio electronics, communications, radars, and measurement equipment. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 60 GSa/s Arbitrary Waveform Generator | |
Arbitrary Waveform Generator
from SHF Communication Technologies
|
| The SHF 12105 A + SHF 614 C from SHF Communication Technologies is a combination of a 64 Gbps Bit Pattern Generator (BPG) and a 60 GBaud 6-Bit Digital to Analog Converter (DAC). The BPG-DAC combination operates as a non-interleaved 60 GBaud Arbitrary Waveform Generator (AWG) with a remote head to preserve signal integrity close to the DUT. |
| |
Download Datasheet |
Product Details | |
|
|
|
| J-Band VNA Frequency Extender from 220 to 330 GHz | |
Vector Network Analyzer Extender
from ERAVANT
|
| The STO-03203N05-T-E1 from Eravant is a Vector Network Analyzer (VNA) Frequency Extender that operates in the J-Band from 220 to 330 GHz. It supports input frequencies from 9.1 to 13.75 GHz and integrates a Tx/Ref pair that has been designed to achieve full 1-port, S-parameter testing over the operating (extended) frequency range. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 350 V/m E-Field Generator from 10 kHz to 100 MHz | |
E-Field Generator
from AR RF/Microwave Instrumentation
|
| The ATE10K100M from AR RF/Microwave Instrumentation is an E-field Generator that operates from 10 kHz to 100 MHz. It is supplied with two sets of interchangeable elements with a quick-disconnect attachment feature. The smaller set (Type A) provides the highest field intensities and is suitable for use with test objects up to 36 x 46 x 36 cm (14 x 18 x 14 in) while the larger set (Type B) is suitable for testing objects up to 48 x 46 x 36 cm (19 x 18 x 14 in). |
| |
Download Datasheet |
Product Details | |
|
|
|
| Rack-Mountable RF Shield Box from 0.7 to 6 GHz | |
RF Shielded Test Enclosure
from Ranatec
|
| The RI 181 from Ranatec is an Rack-Mountable RF Shield Box that operates from 0.7 to 6 GHz. It has been designed to provide a high degree of shielding from all cellular mobile frequency bands (2G, 3G, 4G, and 5G), Wi-Fi, and Bluetooth. This shield box has an inner dimension of 400 x 300 x 85 mm, provides an attenuation of more than 60 dB (at 3 GHz), and can block all wireless signals from various cellular and WLAN devices in its vicinity. It has been developed for rack-mounted test systems where the device under test (DUT) is frequently replaced. |
| |
Download Datasheet |
Product Details | |
|
