Top stories this week. View it in your browser
| | | Weekly Edition | | | Date: 1 Jan, 2024 | | | |
| Sponsored by MWC Barcelona | | |
| Sponsored by MWC Barcelona | | | |
| New White Papers & Articles |
|
|
| Top Spectrum & Vector Network Analyzers in 2023 . | |
|
| Handheld Spectrum Analyzer for Field and Lab Measurement | |
RF Spectrum Analyzer
from Rohde & Schwarz
|
| The R&S Spectrum Rider is a lightweight analyzer with a long battery life which can be used for high accuracy for measurements in the field and in the lab. It is available in various frequency options from 5 kHz to 44 GHz (5 kHz to 2, 3, 4, 6, 13.6, 26.5 and 44 GHz). The good part with this device is that the frequency configurations can be unlocked with a set of keycodes. |
| |
Download Datasheet
Product Details | |
| | |
| 10 GHz Portable, Battery-Operated Software-Defined RF Analyzer | |
RF Spectrum Analyzer
from Keysight Technologies
|
| The FieldFox N9912C from Keysight is a Handheld RF Analyzer for a frequency range of up to 10 GHz. This software-defined analyzer is fully upgradable with license-key activated frequency, bandwidth, and various other features. This battery-operated system can address cable and antenna tests (CAT), real-time spectrum analysis and/or vector network analysis (VNA), and over-the-air digital demodulation analysis required for your application. |
| |
Download Datasheet
Product Details | |
| | |
| Battery-Powered Portable RF Spectrum Analyzer from 9 kHz to 3 GHz | |
RF Spectrum Analyzer
from Anritsu
|
| The Field Master™ MS2070A from Anritsu is a Handheld RF Spectrum Analyzer that operates from 9 kHz to 3 GHz. It conducts reliable and accurate RF measurements in a variety of general-purpose fields, labs, and manufacturing environments at an economical price. This spectrum analyzer has sweep speeds of up to 32 GHz/s in common low-noise configurations and can conduct a variety of “smart” measurements, including occupied bandwidth (OBW), channel power, and adjacent channel power (ACP). |
| |
Download Datasheet
Product Details | |
| | |
| Portable Real-Time USB Spectrum Analyzers from 9 kHz to 18 GHz | |
RF Spectrum Analyzer
from Tektronix, Inc.
|
| The RSA500 Series from Tektronix are Ruggedized, Portable Real-Time Spectrum Analyzers (RTSA) with a frequency range from 9 kHz to 18 GHz. They have an acquisition bandwidth of 40 MHz and a dynamic range from -160 dBm to +20 dBm to enable real-time analysis for transient capture and vector analysis. These analyzers have a full-span sweep speed of up to 70 GHz/sec and a minimum event duration for 100% POI of 15 µs. |
| |
Download Datasheet
Product Details | |
| | | |
|
| | |
| Rugged 40 GHz Intelligent RF Receiver | |
RF Spectrum Analyzer
from CRFS
|
| The RFeye Node 100-40 from CRFS is a Rugged Intelligent Wideband Receiver that operates from 9 kHz to 40 GHz. The receiver is a complete spectrum monitoring and geolocation system designed for remote deployment both indoors and outdoors and in hostile environments. Packaged in a compact, rugged and weatherproof housing, it has been optimized for size, weight and power (SWaP) and is simple to connect to power and network. |
| |
Download Datasheet
Product Details | |
| |
| Sponsored by MWC Barcelona | | |
| |
| 20 GHz Compact USB Real-Time Spectrum Analyzer | |
RF Spectrum Analyzer
from HAROGIC Technologies
|
| The SAE-200 from HAROGIC Technologies is a Compact USB Real-time Spectrum Analyzer that operates from 9 kHz to 20 GHz. It is based on the superheterodyne architecture and has an analysis bandwidth of 100 MHz with a sweep speed of 1.2 THz/s. This spectrum analyzer provides over 60 dB of image suppression, over 90 dB of IF rejection, and SSB phase noise of -131 dBc/Hz (at 10 MHz offset). |
| |
Download Datasheet
Product Details | |
| | |
| Real-Time Spectrum Analyzer with GNSS Capabilities | |
RF Spectrum Analyzer
from ThinkRF
|
| The R5750 from thinkRF is a Real-Time Spectrum Analyzer with built-in GPS for mobile wireless situational awareness applications. With built-in GPS capabilities, this Real-Time Spectrum Analyzer enables engineers in the field to conduct in-depth analysis of complex waveforms while knowing the location and time of each measurement. |
| |
Download Datasheet
Product Details | |
| | |
| 10 MHz to 26 GHz Real-Time Phase Noise Analyzer | |
Phase Noise Analyzer
from Holzworth Instrumentation
|
| The HA7062D from Holzworth is a real time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It has a real-time engine that covers the full measurement bandwidth with extremely fast measurement speeds to reduce product development time and optimize ATE manufacturing throughput. |
| |
Download Datasheet
Product Details | |
| | | |
|
| | |
| Compact Real-Time Spectrum Analyzer from 9 kHz to 8 GHz | |
RF Spectrum Analyzer
from Aaronia AG
|
| The SPECTRAN V6 ECO 200XA-6 from Aaronia AG is a Compact Real-Time Spectrum Analyzer that operates from 9 kHz to 6 GHz (up to 8 GHz optional extension for Wi-Fi 6E support). It incorporates a vector signal generator, has a real-time bandwidth of 44 MHz (Tx) and 88 MHz (2 x 44 MHz, via USB), and a resolution bandwidth from 62 to 200 MHz. |
| |
Download Datasheet
Product Details | |
| | |
| Cost-Effective Signal Analyzer from 100 kHz to 26.5 GHz | |
RF Spectrum Analyzer
from Saluki Technology
|
| The CSA2026 from Saluki Technology is a Signal Analyzer for the frequency range from 100 kHz to 26.5 GHz. It can test signal power, frequency, phase, P-1, TOI, OBW, channel power, spurious, ACPR, CCDF, SEM, EVM, and other indicators. This analyzer has normal, peak, sample, negative peak, log power average, RMS average, and voltage average trace detectors. |
| |
Download Datasheet
Product Details | |
| | | |
|
| | |
| Network Vector Analyzer from 300 kHz to 6 GHz | |
Vector Network Analyzer
from Mini Circuits
|
| The eVNA-63+ from Mini-Circuits is a Network Vector Analyzer that operates from 300 kHz to 6 GHz. This VNA has an integrated User Interface (UI) software, providing a powerful and intuitive control application which will feel familiar to any engineer with experience on modern VNA instruments. |
| |
Download Datasheet
Product Details | |
| | |
| 6 GHz Low Cost, High Performance USB-controlled VNA | |
Vector Network Analyzer
from Pico Technology
|
| The PicoVNA 106 is a 2 Port USB-controlled, laboratory grade vector network analyzer that operates from 300 kHz to 6 GHz. This compact, low cost, high-performance VNA has a "Quad RX" four-receiver architecture to eliminate errors, delays and fragility of three-receiver designs with internal transfer switches. It offers exceptional dynamic range of 118 dB and only 0.005 dB RMS trace noise at its maximum operating bandwidth of 140 kHz. |
| |
Download Datasheet
Product Details | |
| | |
| Handheld Spectrum Analyzer from 10 to 3000 MHz | |
RF Spectrum Analyzer
from SAF Tehnika
|
| The Spectrum Compact 0.01-3 GHz from SAF Tehnika is a handheld Spectrum Analyzer that operates from 10 to 3000 MHz. The analyzer has a resistive LCD touchscreen and intuitive UI for easy control of the unit. It has a USB Type-C interface and allows to upload, save, compare, analyze and print saved test data using free PC software. |
| |
Download Datasheet
Product Details | |
| | |
| Android-Based Handheld Spectrum Analyzer from 9 kHz to 6 GHz | |
RF Spectrum Analyzer
from Deviser
|
| The E8 from Deviser is a Handheld Spectrum Analyzer that operates from 9 kHz to 6 GHz. This Android-based handheld spectrum analyzer solution is compact, light weight, and has a portable design. It enables one-click measurements of signal parameters such as spectral composition, channel power, Adjacent Channel Leakage Ratio (ACLR), and Occupied Bandwidth (OBW). |
| |
Download Datasheet
Product Details | |
| | | |
|
| | |
| Portable 1-Port Vector Network Analyzer from 85 MHz to 14 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The R140B from Copper Mountain Technologies is a 1-Port Vector Network Analyzer that operates from 85 MHz to 14 GHz. It supports linear, log and segment sweeps with up to 100,001 measurement points per sweep and a measurement time of 170 µs per point. This VNA has a dynamic range of 112 dB (85 – 4.8 GHz) and a directivity of 42 dB. |
| |
Download Datasheet
Product Details | |
| | |
| 2-Port Modular Vector Network Analyzer from 400 to 6000 MHz | |
Vector Network Analyzer
from MegiQ
|
| The VNA-0460 from MegiQ is a two port bi-directional vector network analyzer that operates from 400 to 6000 MHz. It is controlled via a PC through a USB connector. This VNA is ideal for measuring all kinds of circuits like antennas, attenuators, amplifiers etc. Its frequency range includes the most popular telecom bands like GSM-GPRS-LTE, WiFi, DECT, GPS, ISM, Zigbee, Bluetooth. |
| |
Download Datasheet
Product Details | |
| | |
| Modular, 4-Port Vector Network Analyzers from 300 kHz to 8.5 GHz | |
Vector Network Analyzer
from Sanko Technologies
|
| The BN900 Series from Sanko Technologies are Modular Vector Network Analyzers with a frequency range from 300 kHz to 6.5/8.5 GHz. They have a dynamic range of up to 130 dB (at IFBW of 10 Hz) with a low trace noise of 2 mdB (rms; at IFBW of 3 kHz). These analyzers have a measurement speed of 42 µs/point (at IFBW of 500 kHz), up to 20,001 measurement points and an effective directivity from 38 to 49 dB to ensure accurate and reliable measurement results. |
| |
Download Datasheet
Product Details | |
| | |
| 2-Port Vector Network Analyzers from 10 MHz to 20 GHz | |
Vector Network Analyzer
from Micran
|
| The R4M Series from Micran are Vector Network Analyzers (VNAs) with a frequency range from 10 MHz to 20 GHz. They have a dynamic range of 100 dB and are used to measure the S-parameters of linear 1-port and 2-port devices and various characteristics of electric circuits. These analyzers are useful for analyzing, tuning, testing, monitoring, and manufacturing of high-frequency and microwave devices used in radio electronics, communications, radars, and measurement equipment. |
| |
Download Datasheet
Product Details | |
| | |
| 2-Port Vector Network Analyzer from 100 kHz to 26.5 GHz | |
Vector Network Analyzer
from SIGLENT
|
| The SNA5032A from Siglent is a 2-Port Vector Network Analyzer (VNA) that operates from 100 kHz to 26.5 GHz with a frequency resolution of 1 Hz. It has a dynamic range of 125 dB and a level resolution of 0.05 dB. This 2-port VNA provides instantaneous measurement results of parameters such as Q-factor, bandwidth, and insertion loss, and insights into scattering, differential, and time-domain measurements. |
| |
Download Datasheet
Product Details | |
| | |
| 4-Port VNA from 70 kHz to 220 GHz with Optional Spectrum Analyzer | |
Vector Network Analyzer
from Anritsu
|
| The VectorStar ME7838G4 from Anritsu is a 4-Port Vector Network Analyzer (VNA) that operates from 70 kHz to 220 GHz. It performs measurements utilizing compact mmWave modules with industry-best calibration stability and includes broadband systems with positive raw directivity. This VNA incorporates the Anritsu MA25400A mmWave module which combines Anritsu’s Nonlinear Transmission Line (NLTL) technology in a small, compact high performance mmWave module for measurements up to 220 GHz. |
| |
Download Datasheet
Product Details | |
| | |
| Phase Noise Analyzer and VCO Tester up to 50 GHz | |
Phase Noise Analyzer
from Rohde & Schwarz
|
| The FSWP is a phase noise analyzer and VCO tester that operates from 1 MHz to 8/26.5/50 GHz with analysis bandwidth of up to 8 GHz. It can measure the spectral purity of signal sources such as generators, synthesizers and voltage-controlled oscillators (VCO). The device has a low displayed average noise level (DANL) of –156 dBm (1 Hz) (without noise cancellation) and simultaneously measures amplitude noise and phase noise. |
| |
Download Datasheet
Product Details | |
| | |
| Handheld Communications Service Monitor from 1 MHz to 6 GHz | |
Vector Network Analyzer
from Viavi Solutions
|
| The CX100 from VIAVI Solutions is a Handheld Communications Service Monitor (CSM) that operates from 1 MHz to 6 GHz. It is a fully featured radio test solution in a lightweight, rugged, and handheld form factor that is designed for tactical and LMR network technicians working in rugged environments. This CSM includes a 1-port VNA for cable and antenna analysis, a built-in spectrum analyzer, and connectivity to the VIAVI Mobile Tech App to simplify the testing process. |
| |
Download Datasheet
Product Details | |
|
| | About everything RF | | everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest news, information on new product releases, white papers, articles, interviews and much more. |
|
| To unsubscribe please click here | [Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip] |
|
