| New RF and Microwave Products this Week . |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Beamforming Front-End IC from 26.5 to 29.5 GHz for 5G Phased Array Systems | |
Beamforming IC
from Sivers Semiconductors
|
| The SUMMIT2629e from Sivers Semiconductors is a Beamforming Front-End IC that operates from 26.5 to 29.5 GHz. It has an eight-channel RF front-end for 5G phased array antenna systems and is fabricated using RF-Silicon on Insulator (RF-SOI) technology. This IC has integrated power amplifiers (PA), low noise amplifiers, T/R switching, beamformers with beam table memory, calibration, gain control, and temperature and power telemetry. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5-Port Air Interface Emulator from 400 to 9000 MHz | |
Channel Emulator
from Becker Nachrichtentechnik GmbH
|
| The AIE-W5LR from Becker RF is an Air Interface Emulator that operates from 400 to 9000 MHz. It enables realistic emulation of HF levels with its five bi-directional input/output RF ports that can be connected to different network access points. Each of the 5 ports can be fed separately with a composite RF signal and the freely programmable mixture of the other four signals can then be set individually for each port. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by SV Microwave | | Threaded SMPM PCB Connectors | | Amphenol SV Microwave has expanded its popular line of threaded SMPM connectors to include even more PCB connector variations. These connectors feature a standard SMPM RF interface with the addition of a threaded coupling nut to ensure low mating and de-mating force. These threaded SMPM connectors are ideal for high vibration environments while still maintaining superior electrical and mechanical performance. In stock through distribution! Click here to learn more. | | | |
|
|
| Dual-Channel Direction Finding and Spectrum Monitoring System from 9 kHz to 18 GHz | |
Direction Finding System
from CRFS
|
| The RFeye Array 300 Series from CRFS is an intermediate-sized spectrum monitoring and direction-finding system for vehicle-mounted deployment or fixed installations. The Array 300 uses a unique multi-layer approach that is more sophisticated and versatile than traditional direction finding. High-performance spiral directional antenna modules are optimized for different frequency bands and arranged in multiple orientations. |
| |
Download Datasheet
Product Details | |
|
|
|
| Coaxial TEM Single Loop Coupler from 2 to 8 GHz | |
Directional Coupler
from Scientific Microwave Corporation
|
| The SMC-073TEM0208 from Scientific Microwave Corporation is a TEM Single Loop Coupler that operates from 2 to 8 GHz. It is available in coupling values from 30 to 60 dB with a directivity of 14 dB and has a VSWR of 1.4:1. This coupler is available in a module with various coaxial connector options and also has an option for pressurized and TVAC units. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 W GaN Power Amplifier from 45 to 46.5 GHz for SATCOM Applications | |
SATCOM Amplifier System
from TTI
|
| The Q-Band SSPA from Celestia TTI operates from 45 to 46.5 GHz. This solid-state power amplifier delivers an output power of 25 W (~44 dBm) with a small signal gain of more than 70 dB and provides an attenuation range of 25 dB in 0.1 dB steps. It is based on GaN technology and ensures robust performance with individual unit testing over the operating temperature (from -30°C to +55°C). |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 GHz Rugged and Armored Test Cables for Flight Line Testing | |
RF Cable
from MegaPhase
|
| The SiteLine™ Series from MegaPhase are Armored Test Cables that operate up to 50 GHz. They are protected by super-rugged armor designed for severe environments, such as flight line, outdoor antenna testing, and demanding production environments. These 50-ohm cables can endure torque, twist, and crush forces and are crush-proof to 44.6 Kg/linear cm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Balanced MMIC Mixer with Integrated 8x Multiplier from 75 to 110 GHz | |
Waveguide Mixer
from AT Microwave
|
| The AT-8MIX-75110L from AT Microwave is a Balanced MMIC Mixer MMIC that has an RF/LO frequency from 75 to 110 GHz and an IF frequency from DC to 10 GHz. The LO frequency from 9.375 to 13.75 GHz can be multiplied by an integrated 8x active frequency multiplier based on the RF Frequency. The mixer has a conversion loss of 10 dB and provides LO-to-IF isolation of 40 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface-Mount Positive Gain-Slope Amplifier from 6 to 18 GHz | |
RF Amplifier
from CML Microcircuits
|
| The CMX90G702 from CML Microcircuits is a Positive Gain-Slope Amplifier that operates from 6 to 18 GHz. It provides a small signal gain of 11.1 dB with a gain slope of +2 dB and has a P1dB of 9.3 dBm. This amplifier eliminates the need for equalization and compensates for increasing system losses with frequency. It has a noise figure of 3 dB and provides a reverse isolation of more than 16 dB. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by SV Microwave | | |
|
|
| 200 W, Coaxial Fixed Attenuator from DC to 4 GHz | |
Fixed Attenuator
from JFW Industries
|
| The 50FHAO-XXX-200-4 is a fixed attenuator from JFW Industries that operates from DC to 4 GHz. It is available in attenuation values of 30 or 40 dB and has a VSWR of less than 1.40:1. The attenuator can handle up to 200 watts of average power and a peak power of up to 1000 watts. It is available with 4.3/10.0, N, SMA or TNC connector options. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 Watt, 8-Way Power Divider from 380 to 960 MHz | |
Power Divider
from MECA
|
| The 808-2-0.670 from MECA is a 8-way power divider that operates from 380 to 960 MHz covering all the Public Safety bands. It can handle up to 40 watts of power, has an insertion loss of under 1.3 dB and isolation over 10 dB. The power divider is available in a module with SMA Female connectors and is ideal for enterprise & public safety networks such as UHF, VHF, 700 MHz & Cell bands. |
| |
Download Datasheet
Product Details | |
|
|
|
| Modular Software-Defined Radio Platform from 70 MHz to 6 GHz | |
Software Defined Radio
from Alén Space
|
| The TREVO from Alen Space is a Modular Software Defined Radio Platform that operates from 70 MHz to 6 GHz. It employs SoCs based on the Zynq UltraScale+ family and multi-core processing and FPGA flexibility. This SDR platform’s motherboard can handle different numbers of SoC and transceivers, integrating in a single subsystem all the radio chain and processing units to support the most demanding satellite software applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10/60 MHz Space-Qualified Rubidium Atomic Frequency Source | |
Rubidium Oscillator
from Safran Electronics & Defense
|
| The miniRAFS from Safran is a Rubidium Atomic Frequency Source with an operating frequency of 60 MHz (Main) and 10 MHz (Auxiliary). It provides an output signal level of 7 dBm and has a frequency accuracy of better than 2 x 10-10. The frequency source has a phase noise of -135 dBc/Hz (@100 kHz offset), spurious levels of better than -60 dB and harmonics of -30 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-band, 3GPP Rel-16 5G NR/LTE-FDD/LTE-TDD/HSPA+ Module | |
Cellular Module
from SIMCom
|
| The SIM8260G-M2 from SIMCom is a Multi-band 5G NR/LTE-FDD/LTE-TDD/HSPA+ Module. It supports 3GPP Release-16 5G NSA/SA architectures with an uplink data rate of 3.47 Gbps (5G NSA) and a downlink data rate of 0.9 Gbps (5G SA). This module supports GNSS constellations. It has multiple integrated interfaces such as PCIe, USB 3.1, GPIO, etc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G RedCap Module with 4G LTE Fallback and URLLC Support | |
Cellular Module
from Quectel
|
| The RM255C-GL from Quectel is a 5G RedCap Module that has been designed for the global market and covers nearly all the mainstream carriers worldwide. It is based on the 3GPP Release 17 RedCap technology which supports 5G SA modes and offers backward compatibility with the existing 4G LTE network. This module supports 5G URLLC and L1+L5 precise and power-optimized positioning to greatly simplify product design and provide more dependable positioning capability. |
| |
Download Datasheet
Product Details | |
|
|
|
| Matter-compliant IoT Module for Enterprise/Industrial Applications | |
RF Module
from Murata
|
| The Type 2FR from Murata is a Matter-Compliant IoT Module. It supports various communication protocols, including dual-band Wi-Fi 6, Bluetooth Low Energy (LE) 5.3, 802.15.4, and Ethernet. It is based on NXP Semiconductor's RW612 Wireless MCU with integrated tri-radio and has a built-in 260 MHz Arm Cortex-M33 core, 1.2 MB of RAM, and 16 MB of flash memory. |
| |
Product Details | |
|
|
|
| Low Noise Amplifier from 8 to 18 GHz | |
RF Amplifier
from Quantic PMI (Planar Monolithics)
|
| The PEAFS3-14-0R2535R0-6R5-23-12-292MF from Quantic PMI is a Low Noise Amplifier (LNA) that operates from 8 to 18 GHz. It provides a gain of 13 dB with a noise figure of less than 5 dB and has an output P1dB of more than 24 dBm. This LNA has undergone MIL-STD-202F military screening procedures to ensure reliability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 Ohm GaAs IPD Termination MMIC from DC to 50 GHz | |
Termination
from AmpliTech
|
| The AGTRM050 from AmpliTech is a GaAs IPD Termination MMIC that operates from DC to 50 GHz. This 50-ohm termination has a return loss of 18 dB. It is available as a die that measures 1.00 x 0.75 x 0.10 mm with an option for AC and DC-coupled RF port. This termination is ideal for use in communication systems, point-to-point radio, fiber optics, test equipment, and wideband military and space applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Band Front-End Module for 3G/4G/5G Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY5A3043 from Skyworks is a Front-End Module that supports 2G, 3G, 4G, and 5G mobile bands. It consists of a low-band 3G/4G/5G PA block, low-band and high-band 2G PA blocks, a silicon controller containing the MIPI RFFE interface, RF band switches, antenna switches, a bi-directional coupler, integrated filters and low noise amplifier (LNA). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 36-Port, 4x4 MIMO Base Station Panel Antenna from 1695 to 2690 MHz | |
Base Station Antenna
from Galtronics USA, Inc
|
| The GP5136-07800 from Galtronics is a 4x4 MIMO Base Station Panel Antenna that operates from 1695 to 2690 MHz. This dual-slant (±45°)-polarized antenna provides a gain of up to 23.2 dBi and has a VSWR of 1.4:1. It has an azimuth beamwidth of up to 8.8°, elevation beamwidth of 16.0°, and an electrical down-tilt of 6 FET (per each 4 x 4 beam cluster). |
| |
Download Datasheet
Product Details | |
|
|
|
| 10-Port Base Station Antenna from 698 to 2690 MHz | |
Base Station Antenna
from Amphenol Antenna Solutions
|
| The 6800310ENGv from Amphenol Antenna Solutions is a 10-port Base Station Antenna that operates from 698 to 960 MHz and 1695 to 2690 MHz. This dual-polarized antenna provides a peak gain of 17.7 dBi and has a VSWR of less than 1.5:1. It has an average azimuth beamwidth of up to 65°, an elevation beamwidth from 5.1° to 8.3° and an electrical down-tilt from 0 to 10° on each band. |
| |
Download Datasheet
Product Details | |
|
|
|
| Point-to-Multipoint Radio from 4.9 to 6 GHz for Low-Density Areas | |
Microwave Backhaul Radio Links
from Radwin
|
| The 5000L from RADWIN is a Point-to-Multipoint (PtMP) Radio that operates from 4.9 to 6 GHz. It is designed for low-density areas with few end users and delivers a throughput of up to 250 Mbps for 16 end users. This radio uses RADWIN’s unique air interface to ensure end-user SLA via CIR (Committed Information Rate) with fixed latency, and low Jitter. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Surge Protectors from 1.5 to 1000 MHz with DC Block | |
RF Surge Protector
from NexTek, LLC.
|
| The PTI-BB50NMP-W from NexTek are Coaxial RF Surge Protectors that operate from 1.5 to 1000 MHz. They can handle an input power of up to 2 kW, a surge current of 50 kA, and have a turn-on time of 2.5 ns. These 50-ohm surge protectors have an insertion loss of 0.1 dB and a VSWR of 1.10:1. They have a turn-on DC voltage of 600 V and a rated impulse discharge current of 20 kA. |
| |
Download Datasheet
Product Details | |
|
