| New Wireless Infra. Products . |
|
|
| 5G Interference Mitigation Filter with Passband from 3800 to 4200 MHz | |
Waveguide Filter
from Microwave Filter Company
|
| The MFC21000 from Microwave Filter Company is a Bandpass Filter (BPF) with a passband from 3800 to 4200 MHz. It has a tunable bandwidth with a passband insertion loss of less than 0.6 dB and provides an out-of-band rejection of more than 55 dB. This BPF is ideal for eliminating interference from 5G and any other potential source of interference. It is available in a module for outdoor applications with CPR-229G input waveguide interface and CPR-229F output waveguide interface. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2-Port In-Building DAS Antennas from 617 to 8500 MHz | |
Antenna
from Sinclair Technologies
|
| The SI500A Series from Sinclair are 2-port In-Building DAS Antennas that operate from 617 to 8500 MHz. These linear-horizontally-polarized antennas provide 5 dBi of gain and have a VSWR of less than 2.2:1. They offer port-to-port isolation of more than 30 dB and can handle up to 50 W of input power per port. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Surge Protectors from 1.5 to 1000 MHz With DC Block | |
RF Surge Protector
from NexTek, LLC.
|
| The PTI-BB50NMP-W from NexTek are Coaxial RF Surge Protectors that operate from 1.5 to 1000 MHz. They can handle an input power of up to 2 kW, a surge current of 50 kA, and have a turn-on time of 2.5 ns. These 50-ohm surge protectors have an insertion loss of 0.1 dB and a VSWR of 1.10:1. They have a turn-on DC voltage of 600 V and a rated impulse discharge current of 20 kA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 36-Port, 4x4 MIMO Base Station Panel Antenna from 1695 to 2690 MHz | |
Base Station Antenna
from Galtronics USA, Inc
|
| The GP5136-07800 from Galtronics is a 4x4 MIMO Base Station Panel Antenna that operates from 1695 to 2690 MHz. This dual-slant (±45°)-polarized antenna provides a gain of up to 23.2 dBi and has a VSWR of 1.4:1. It has an azimuth beamwidth of up to 8.8°, elevation beamwidth of 16.0°, and an electrical down-tilt of 6 FET (per each 4 x 4 beam cluster). |
| |
Download Datasheet
Product Details | |
|
|
|
| 8-Port Sector Antenna from 5700 to 6875 MHz for Six Sector Sites | |
Base Station Antenna
from Alpha Wireless
|
| The AW3802-T2-H-6G from Alpha Wireless is an 8-Port Sector Antenna that operates from 5700 to 6875 MHz. This vertically and horizontally polarized antenna provides a peak gain of 18.1 dBi and has a VSWR of less than 1.9:1. It has an azimuth beamwidth of 65° and an elevation beamwidth of 6. The antenna consists of two 4-port sector antennas orientated with 60° azimuth separation. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Rohde & Schwarz | | | |
|
|
| 10-Port Base Station Antenna from 698 to 2690 MHz | |
Base Station Antenna
from Amphenol Antenna Solutions
|
| The 6800310ENGv from Amphenol Antenna Solutions is a 10-port Base Station Antenna that operates from 698 to 960 MHz and 1695 to 2690 MHz. This dual-polarized antenna provides a peak gain of 17.7 dBi and has a VSWR of less than 1.5:1. It has an average azimuth beamwidth of up to 65°, an elevation beamwidth from 5.1° to 8.3° and an electrical down-tilt from 0 to 10° on each band. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10-Port Sector Antenna from 694 to 3800 MHz | |
Base Station Antenna
from CommScope
|
| The 10P-4L6M-D5 from CommScope is a 10-Port Sector Antenna that operates from 694 – 960 MHz and 1695 – 2690 MHz. This ±45° polarized antenna provides a gain of up to 17.8 dBi and has a VSWR of 1.50:1. It has a horizontal beam width of up to 70°, a vertical beamwidth from 5.3 to 8.1° and a beam tilt from 2 to 12°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 W, GaN Hybrid Power Amplifier Module from 3.7 to 4.1 GHz | |
RF Amplifier
from RFHIC
|
| The SDM39005-30H from RFHIC is a 2-Stage GaN Hybrid Power Amplifier Module that operates from 3.7 to 4.1 GHz. It delivers a saturated output power of 60 W with a power gain of 34 dB and a drain efficiency of 14%. It is internally matched to 50 ohms and requires a DC supply voltage of 48 V to operate. The amplifier is available in a ceramic surface-mount package that measures 8.0 x 14.0 x 2.6 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8 W GaN Doherty Power Amplifier Module from 3.4 to 3.8 GHz | |
RF Amplifier
from Qorvo
|
| The QPB3810 from Qorvo is a Doherty Power Amplifier Module that operates from 3.4 to 3.8 GHz. It delivers an output power of 39 dBm (~8 W) and has an integrated bias controller that is factory programmed to set optimal bias points. This 2-stage GaN power amplifier includes a temperature sensor and adjusts bias over temperature along with an enable pin for fast TDD switching. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Rugged 4-Channel High-Power Radio from 2.2 to 2.5 GHz | |
Data Link
from Triad RF Systems
|
| The THPR1055 from Triad RF Systems is a 4-channel High-Power Radio that operates from 2200 to 2500 MHz. It combines Silvus Streamcaster SC4410-235-O OEM form-factor radio with Triad’s high-power RF subsystems in a low SwaP package. This radio consists of RF components such as bidirectional amplifiers (BDAs), RF filtering, and control circuitry to achieve higher RF output power, greater throughput, and greater link distances than standalone radios. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-6 GHz 5G Small Cell + 2.4/5/6 GHz Wi-Fi 7 Integrated Access Point | |
Microwave Backhaul Radio Links
from BLiNQ Networks
|
| The PCW-400i from BlinQ Networks is an Integrated Enterprise 5G Small Cell and Wi-Fi 7 Access Point (AP). It operates in the n48, n77 and n78 bands for 5G connectivity and 2.4/5/6 GHz bands for Wi-Fi connectivity. This access point can support up to 128 users simultaneously and has an integrated antenna to provide 360° coverage and eliminate dead zones in the network. |
| |
Download Datasheet
Product Details | |
|
|
|
| Point-to-Multipoint Radio from 4.9 to 6 GHz for Low-Density Areas | |
Microwave Backhaul Radio Links
from Radwin
|
| The 5000L from RADWIN is a Point-to-Multipoint (PtMP) Radio that operates from 4.9 to 6 GHz. It is designed for low-density areas with few end users and delivers a throughput of up to 250 Mbps for 16 end users. This radio uses RADWIN’s unique air interface to ensure end-user SLA via CIR (Committed Information Rate) with fixed latency, and low Jitter. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP67-Rated Quadruplexer with Passbands from 617 to 4200 MHz | |
Quadplexer
from Kaelus
|
| The KA-4006 from Kaelus is a Quadraplexer with passbands from 617 – 960 MHz, 1427 – 2200 MHz, 2300 – 2690 MHz, and 3300 – 4200 MHz. It has a passband insertion loss of less than 0.25 dB and provides out-of-band rejection of more than 40 dB. This quadruplexer can handle an average input power of 100 W and has a passive intermodulation (PIM) of less than -160 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| RF-Over-Fiber Transceiver from 1 to 40 GHz | |
RF Over Fiber Module
from RFOptic
|
| The RFoF-40GHz Mini from RFOptic is an RF-over-Fiber Transceiver System that operates from 1 to 40 GHz. The Tx unit consists of an optical transmitter (converts RF to optical signal), and the Rx unit (converts optical to RF signal). The transceiver can be used to connect base stations to an antenna via fiber over a long distance. |
| |
Download Datasheet
Product Details | |
|
|
|
| FPGA-Based Digital Signal Booster from 758 to 869 MHz | |
RF Repeaters
from Fiplex Communications
|
| The HONBDA-A-7S27B from Fiplex is a Digital Signal Booster that operates from 758 to 869 MHz covering the 700 and 800 MHz public safety bands. It has a passband bandwidth of 100 kHz, provides a gain of 85 dB and an antenna isolation of 20 dB. This FPGA-based signal booster has oscillation detection with alarm and auto-shutdown, an antenna isolation measurement feature and an antenna isolation alarm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Twin-Diplexed Tower Mount Amplifier from 555 to 2200 MHz | |
Tower Mount Amplifier
from CommScope
|
| The TMAT1921B68-21-43 from CommScope is a Tower Mount Amplifier (TWA) that operates from 555 to 894 MHz and 1695 to 2200 MHz. On the Tx side (downlink), it has an insertion loss of less than 0.45 dB and provides an out-of-band rejection of more than 55 dB while on the Rx side (uplink), it provides a gain of 12 dB with a noise figure of 1 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Channel Receiver Multicouplers from 896 to 960 MHz | |
Multicoupler
from Comprod
|
| The XRM-90-XX from Comprod are Multi-Channel Receiver Multicouplers that operate from 896 to 960 MHz. They are available in 2, 4, 8, 12, 16, and 32 port configurations and can combine multiple receiver frequencies onto the same antenna. These Multicouplers integrate an amplifier that provides a gain of up to 32 dB with a noise figure of 1.3 dB, and a splitter that offers a port-to-port isolation of more than 23 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| PtP/PtMP Radio from 4910 to 6080 MHz for High-Interference Environments | |
Microwave Backhaul Radio Links
from Cambium Networks
|
| The ePMP Force 300-25 from Cambium Networks is a Point-to-Point (PtP) and Point-to-Multipoint (PtMP) Radio that operates from 4910 to 6080 MHz. It is designed to operate in high-interference environments and provides a throughput of over 500 Mbps of real user data. This radio uses a dish antenna with a 3 dB beamwidth from 6° to 10° each in the azimuth and elevation directions. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ethernet-Powered 5 GHz Outdoor WLAN Access Point | |
Microwave Backhaul Radio Links
from Ligowave
|
| The LigoVision 5-15ac from LigoWave is an Outdoor WLAN Access Point that operates in the 5 GHz band. It supports channel bandwidths up to 80 MHz and delivers a data rate of up to 866 Mbps at 80 MHz channel bandwidth. This access point supports IEEE 802.11a/n/ac and iPoll 3 WLAN standard and dual 2×2 MIMO radio mode. It supports FEC and LDPC error correction, Time Division Duplex (TDD) duplexing scheme and OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK) modulation schemes. |
| |
Download Datasheet
Product Details | |
|
