| Trending Test & Measurement Products . |
|
|
| 2-Port Compact USB VNA from 300 kHz to 1.3 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The TR1300/1 from Copper Mountain Technologies is a 2-Port lab-grade vector network analyzer that operates from 300 kHz to 1.3 GHz. This compact computer controlled VNA has a dynamic range of 130 dB and can measure up to 100,001 measurement points. It includes an RF measurement module and TR software application which runs on Windows or Linux operating system on a PC, laptop, tablet, or x86 board computer connecting to the measurement hardware via USB interface. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Port Vector Network Analyzers from 10 MHz to 20 GHz | |
Vector Network Analyzer
from Micran
|
| The R4M Series from Micran are Vector Network Analyzers (VNAs) with a frequency range from 10 MHz to 20 GHz. They have a dynamic range of 100 dB and are used to measure the S-parameters of linear 1-port and 2-port devices and various characteristics of electric circuits. These analyzers are useful for analyzing, tuning, testing, monitoring, and manufacturing of high-frequency and microwave devices used in radio electronics, communications, radars, and measurement equipment. |
| |
Download Datasheet
Product Details | |
|
|
|
| Modular, 4-Port Vector Network Analyzers from 300 kHz to 8.5 GHz | |
Vector Network Analyzer
from Sanko Technologies
|
| The BN900 Series from Sanko Technologies are Modular Vector Network Analyzers with a frequency range from 300 kHz to 6.5/8.5 GHz. They have a dynamic range of up to 130 dB (at IFBW of 10 Hz) with a low trace noise of 2 mdB (rms; at IFBW of 3 kHz). These analyzers have a measurement speed of 42 µs/point (at IFBW of 500 kHz), up to 20,001 measurement points and an effective directivity from 38 to 49 dB to ensure accurate and reliable measurement results. |
| |
Download Datasheet
Product Details | |
|
|
|
| Non-Blocking 4x4 Solid-State Switch Matrix from 100 kHz to 4 GHz | |
Switch Matrix
from Becker Nachrichtentechnik GmbH
|
| The RSWM-4X4LR from Becker RF is an 4x4 Switch Matrix that operates from 100 kHz to 4 GHz. It has four inputs and four outputs interconnected via a non-blocking matrix where a single input can route to multiple outputs simultaneously. This switch matrix has high channel isolation to ensure that signals in adjacent radio channels do not affect each other. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4x24 Switch Matrix Series from 9 kHz to 26.5 GHz for 5G Testing | |
Switch Matrix
from SIGLENT
|
| The SSM5000A Series from Siglent are Switch Matrices that operate from 9 kHz to 26.5 GHz. They can be configured to have up to 4 input ports with up to 24 output ports and an isolation of more than 65 dB. These switch matrices can handle an input power of 20 dBm and have a switching time of 10 µs. They can expand the number of test ports of a network analyzer, signal source, spectrum analyzer, or other equipment. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 GHz Compact USB Real-Time Spectrum Analyzer | |
RF Spectrum Analyzer
from HAROGIC Technologies
|
| The SAE-200 from HAROGIC Technologies is a Compact USB Real-time Spectrum Analyzer that operates from 9 kHz to 20 GHz. It is based on the superheterodyne architecture and has an analysis bandwidth of 100 MHz with a sweep speed of 1.2 THz/s. This spectrum analyzer provides over 60 dB of image suppression, over 90 dB of IF rejection, and SSB phase noise of -131 dBc/Hz (at 10 MHz offset). |
| |
Download Datasheet
Product Details | |
|
|
| Featured eBook - Download Now! | | |
|
|
|
|
|
|
|
| Real-Time Spectrum Analyzer for Monitoring Sub-6 GHz/mmWave 5G Networks | |
RF Spectrum Analyzer
from Aaronia AG
|
| The Spectran V6 5G from Aaronia is a Real-Time Spectrum Analyzer (RTSA) that operates with a frequency range from 250 MHz to 7.125 GHz and 24 to 53 GHz. It has a real-time bandwidth (Rx) of 60 MHz with a sweep speed of 3 THz/s and can scan 6 GHz of spectrum in less than 10 ms. This RTSA has a resolution bandwidth from 62 mHz to 200 MHz, a DANL of -170 dBm/Hz (with internal pre-amplifier ON) and an amplitude accuracy of ±0.5 dB (compensated by FIR filter). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| RF Shielded Chambers for Testing Devices up to 18 GHz | |
Anechoic Chamber
from RF Electronics
|
| The HDRF-CHM Series from RF Electronics are RF Shielded Chambers that are designed for large area WLAN, multiple client/multiple AP wireless devices testing from 10 kHz to 18 GHz. They have thick RF absorbing foam that deadens standing waves and reflections and provide high isolation to deliver an accurate performance. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 40 GHz Programmable AWGN Noise Generator | |
Noise Generator
from Noisecom
|
| The UFX7000B from Noisecom is a Programmable AWGN Noise Generator that can generate noise signals up to 40 GHz. It incorporates a broadband noise source and noise path attenuator (with a maximum attenuation range of 127 dB in 1 dB steps). This noise generator provides an output power of up to +30 dBm with excellent flatness. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Probe Antenna Measurement System from 400 MHz to 6 GHz | |
Antenna Measurement System
from Microwave Vision Group
|
| The SG 24 from MVG is a Multi-Probe Antenna Measurement System for frequencies from 400 MHz to 6 GHz (extendable to 10 GHz). It has a dynamic range of 70 dB (from 0.4 – 6 GHz) and a measurement time of approximately 1 minute. This antenna measurement system uses near-field/spherical or far-field technology to measure parameters such as gain, directivity, beamwidth, cross-polar discrimination, sidelobe levels, front-to-back ratio, 1D, 2D and 3D radiation patterns, radiation pattern in any polarization (linear or circular), and more. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W GaN Instrumentation Power Amplifier from 18 to 26.5 GHz | |
RF Amplifier
from Maury Microwave
|
| The MPA-18G-26G5-100 from Maury Microwave is an Instrumentation Power Amplifier that operates from 18 to 26.5 GHz. It delivers a saturated output power of 100 W with a small signal gain of more than 51 dB. This amplifier is manufactured based on state-of-the-art GaN technology that exhibits high linearity for wideband communications testing purposes. |
| |
Download Datasheet
Product Details | |
|
|
|
| Digital Power Meter from 2400 to 2500 MHz | |
RF Power Meter & Sensor
from Werlatone Inc
|
| The WPM11654 from Werlatone is a Digital Power Meter that operates from 2400 to 2500 MHz. It has a power rating of up to 5000 W (CW) and allows simultaneous measurements of forward power, reflected power, VSWR, and temperature. This power meter has 42 frequency set points for calibration which offers optimal accuracy over the full operating band. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz to 6 GHz (Optional to 24 GHz) Real-Time Phase Noise Analyzer | |
Phase Noise Analyzer
from Holzworth Instrumentation
|
| The HA7062C from Holzworth is a real time fully integrated phase noise analysis system that operates from 10 MHz to 6 GHz. It utilizes the same core engine from the HA7402C analyzer along with a pair of high performance RF Synthesizers as the test signal LOs. The stability of the agile synthesizers operating as LO sources for the high speed, cross-correlation core enables an extremely reliable phase noise analyzer. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 4/8-Channel Oscilloscopes with Bandwidths up to 2 GHz | |
Oscilloscope
from Rohde & Schwarz
|
| The R&S®MXO 5 Series from Rohde & Schwarz are Oscilloscopes that are available in four and eight-channel models. They have bandwidth options of 100 MHz, 200 MHz, 350 MHz, 500 MHz, 1 GHz, and 2 GHz. These oscilloscopes have two MXO-EP (extreme performance) Rohde & Schwarz application-specific integrated circuits (ASIC) to perform 4.5 million acquisitions per second and 18 million waveforms per second across multiple channels. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Channel, 12-bit Oscilloscopes with Bandwidth from 20 to 65 GHz | |
Oscilloscope
from Teledyne LeCroy
|
| The WaveMaster 8000HD from Teledyne LeCroy are Oscilloscopes with bandwidths from 20 to 65 GHz. These 4-channel oscilloscopes have a 12-bit resolution with a maximum sample rate of 320 GS/s. They are designed to support the entire development cycle – from first-silicon characterization, and link validation over channels, to debugging – across the entire protocol stack to enable faster time-to-market. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Precision-Calibrated Waveguide Noise Source from 140 to 200 GHz | |
Noise Source
from ERAVANT
|
| The STZ-14420412-05-IT2 from ERAVANT is a Precision-Calibrated Noise Source that operates from 140 to 200 GHz. It has an excess noise ratio (ENR) of 12 dB and an ENR flatness of ±4 dB. This noise source is designed with improved port return loss for high reliability and accurate noise figure measurements. It can work either in CW or pulsed AM mode up to 1 kHz, depending on the driving signal. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 GHz Rugged and Armored Test Cables for Flight Line Testing | |
RF Cable
from MegaPhase
|
| The SiteLine™ Series from MegaPhase are Armored Test Cables that operate up to 50 GHz. They are protected by super-rugged armor designed for severe environments, such as flight line, outdoor antenna testing, and demanding production environments. These 50-ohm cables can endure torque, twist, and crush forces and are crush-proof to 44.6 Kg/linear cm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
