| New RF and Microwave Products this Week . |
|
|
| High-Linearity Driver Amplifier from 0.6 to 2.8 GHz for 5G Applications | |
RF Amplifier
from Qorvo
|
| The QPA9442 from Qorvo is a Driver Amplifier that operates from 0.6 to 2.8 GHz. It provides a gain of up to 19 dB with a noise figure of less than 7.8 dB and has an output P1dB of up to +30 dBm (1 W). This amplifier has an ACPR of less than -63 dBc and provides exceptional linearity performance with +46 dBm output 3rd order intercept (OIP3). It is ideal for 5G m-MIMO, mobile infrastructure, general-purpose wireless and TDD system applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Integrated Tx/Rx Front-End Module for 3G/4G/5G Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58101-11 from Skyworks is a Front-End Module that covers 2G, 3G, 4G and 5G bands. It consists of a low-band 3G/4G/5G PA block, low-band and high-band 2G PA blocks, a silicon controller consisting of the MIPI RFFE interface, RF band switches, antenna switches, a bi-directional coupler, integrated filters for Bands 8, 12, 20, 26, 28A, and 29, and low noise amplifier (LNA). |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual Channel IF Transceiver IC from 37 to 48.2 GHz | |
RF Transceiver
from Anokiwave
|
| The AWMF-0196 from Anokiwave is a Dual Channel IF Transceiver IC that operates from 37 to 48.2 GHz covering n260, n259, and n262 3GPP bands. It has integrated dual Tx single-sideband up-conversion, dual Rx image-reject down-conversion functionality, and an on-chip PLL/VCO LO synthesizer that enables 2T2R applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12-Port Vector Network Analyzer from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SN5090-12 from Copper Mountain Technologies is a 12-Port Vector Network Analyzer that operates from 300 kHz to 9 GHz. It can measure all s-parameters and supports linear frequency, log frequency, segment, and power sweep types. The analyzer has a measurement time of 24µs per point and can measure 2 to 500,001 points per sweep. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 GHz Benchtop Power Meter with Four USB Controlled Power Sensors | |
RF Power Meter & Sensor
from Boonton
|
| The PMX40 from Boonton is an RF Power Meter that operates from 4 kHz to 40 GHz. It provides design engineers and technicians the utility of traditional benchtop instrument, with the flexibility / performance of modern USB RF power sensors, and the simplicity of a multi-touch display that can be used to control and configure measurements. This standalone solution can be used to capture, display, and analyze peak and average RF power in both the time and statistical domains. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 kW Pulsed Solid-State Power Amplifier from 1.20 to 1.40 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP4087P-1KW from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 1.20 to 1.40 GHz. It delivers a pulsed output of 1000 W with more than 60 dB of gain. This amplifier has a pulse width of up to 100 µS with a maximum duty cycle of 10%. It is ideal for standalone use or as a TWT driver for high-power pulse radars. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| Double-Ridge Waveguide Pressure Window from 2 to 4.8 GHz | |
Waveguide Pressure Window
from Scientific Microwave Corporation
|
| The SMC-060D200 from Scientific Microwave Corporation is a Double-Ridge Waveguide Pressure Window that operates from 2 to 4.8 GHz. It can handle a pressure of up to 40 Psi (Quartz) / 30 Psi (Kapton and Teflon) and has a VSWR of 1.15:1. This pressure window is available in a module with a WRD200 waveguide interface. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Profile Gap Capacitors with High Q and Self-Resonance Frequencies | |
RF Capacitor
from Quantic Eulex
|
| The XG Series from Quantic Eulex are low-profile gap capacitors with a low insertion loss and ultra-high self-resonance frequencies. The Eulex Gap Capacitors utilize a novel patented internal electrode design allowing for significant leverage in capacitance for a given dielectric. This allows Eulex to offer devices manufactured from ultra-stable materials with high Q and extremely high self-resonance with useful capacitance values far exceeding those offered by other manufacturers. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Voltage Variable Gain Amplifier from 1 to 18 GHz | |
RF Amplifier
from Quantic PMI (Planar Monolithics)
|
| The PE2-34-1G18G-3R5-20-SFF-VVG-DD from Quantic PMI is a Voltage Variable Gain Amplifier with an integrated diode detector that operates from 1 to 18 GHz. It has a gain control range of 30 dB with gain flatness of ±1.5 dB and a P1dB of 10 dBm. The amplifier has a noise figure of 4.5 dB and a VSWR of less than 2.0:1 (input/output). |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Linearity Two-Stage InGaP Power Amplifier from 1710 to 1785 MHz | |
RF Amplifier
from Guerrilla RF
|
| The GRF5617 from Guerrilla RF is a Two-Stage Power Amplifier that operates from 1710 to 1785 MHz. It provides a small signal gain of 25.1 dB and maintains a linear output power of 26 dBm at 85°C. This amplifier is based on InGaP HBT technology and provides excellent P1dB, ACLR, and IM3 performance. The high linearity of this amplifier makes it an ideal choice for transmitter applications that typically do not employ digital pre-distortion correction schemes. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Differential-to-Single-Ended RF Amplifier from 4.4 to 5 GHz | |
RF Amplifier
from iCana
|
| The ICASD4450-D2S from iCana is a Differential-to-Single-Ended Gain Amplifier that operates from 4.4 to 5.0 GHz. It provides a gain of 16.5 dB with a noise figure of 3.6 dB and has an output P1dB of 17 dBm. This amplifier is manufactured using GaAs technology that exhibits low noise figures and high linearity, allowing it to be used in both receiver and transmitter applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Grade 2.4/5/6 GHz Wi-Fi 6E and Dual-Mode Bluetooth 5.3 Modules | |
RF Module
from u-blox AG
|
| The JODY-W6 Series from u-blox are Tri-band Wi-Fi 6E and Dual-Mode Bluetooth 5.3 Modules that operate in the 2.4, 5 and 6 GHz bands. They are based on the automotive-qualified NXP AW693 chip and are AEC-Q104 automotive-qualified qualified manufactured in line with ISO/TS 16949. These modules support dual-mode Bluetooth 5.3 BR/EDR and LE features, such as high data rates, extended advertising, long-range, and the use of isochronous channels for LE Audio, fully simultaneously to Wi-Fi operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Power Multi-Band Cat-M/NB-IoT Module for e-Health Applications | |
Cellular Module
from SIMCom
|
| The SIM7080G from SimCom is a Multi-Band Cat-M/NB-IoT Module. It has been designed for applications that require low latency and enables low throughput data communication in a variety of radio propagation conditions. This module supports both Cat-M and NB-IoT technologies in a single package and offers a unique combination of performance, security, and flexibility, providing flexibility and ease of integration for the customer’s application. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE Cat 1/Cat 4 Module for IoT Applications | |
Cellular Module
from Cavli Wireless
|
| The C10QS from Cavli Wireless is an LTE Cat 1/Cat 4 Module that supports EMEA, APAC and NA cellular bands. It delivers a downlink data rate of 150 Mbps (LTE Cat 4) & 10 Mbps (LTE Cat 1) and an uplink data rate of 50 Mbps (LTE Cat 4) & 5 Mbps ( LTE Cat 1). This module has integrated GNSS capability which utilizes Qualcomm IZat location technology Gen8C Lite and supports various satellite navigation systems such as GPS, GLONASS, BeiDou/Compass, Galileo, and QZSS, enabling accurate and reliable positioning. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Beam Base Station Antenna from 617 to 2690 MHz | |
Base Station Antenna
from MatSing
|
| The MS-4.2DB60-T from MatSing is a Multi-Beam Base Station Lens Antenna that operates from 617 – 896 MHz (L-band) and 1695 – 2690 MHz (H-band). This dual-slant ±45° polarized antenna utilizes MatSing’s patented spherical lens technology and supports 2 beams in the L-band and 4 beams in the H-band. It provides a gain of 20.5 dBi with a horizontal beamwidth and vertical beamwidth of up to 60°. |
| |
Download Datasheet
Product Details | |
|
|
|
| Digital Power Meter from 2400 to 2500 MHz | |
RF Power Meter & Sensor
from Werlatone Inc
|
| The WPM11654 from Werlatone is a Digital Power Meter that operates from 2400 to 2500 MHz. It has a power rating of up to 5000 W (CW) and allows simultaneous measurements of forward power, reflected power, VSWR, and temperature. This power meter has 42 frequency set points for calibration which offers optimal accuracy over the full operating band. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 dB RF Attenuator MMIC from DC to 40 GHz | |
Fixed Attenuator
from Marki Microwave
|
| The ATN06-0040PSM from Marki Microwave is a GaAs RF Attenuator MMIC that operates from DC to 40 GHz. This 6 dB attenuator can handle an input power of up to 2 W and has a return loss of 22 dB. It is available in a DFN package that measures 2.0 x 1.3 mm and consumes less than 100 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 W, Compact Block Up-Converter from 29 to 31 GHz | |
Block Up Converter
from Mission Microwave
|
| The Cube-Ka-20 Watt Cube from Mission Microwave is a Ka-Band Block Up-Converter that converts input frequencies from 950 – 1950/1000 – 2000 MHz to output frequencies from 29 – 30/30 – 31 GHz. It delivers an output power of up to 20 W (43 dBm) with a gain of 60 dB and has a phase noise of -105 dBc/Hz (@1 MHz offset). |
| |
Download Datasheet
Product Details | |
|
|
|
| Cryogenic Assembly to Operate 5 - 7 GHz Josephson Parametric Amplifier | |
Integrated Microwave Assembly
from Quantum Microwave
|
| The QMC-JPA-MCA01 from Quantum Microwave is a Cryogenic Turn-key Assembly that has been developed to operate Raytheon BBN's 5 – 7 GHz Wide Bandwidth Josephson Parametric Amplifier (JPA). It can be used to design, develop, and validate auxiliary cryogenic circuitry which is required before near-quantum limited noise measurements can be conducted with the JPA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12 dBi Horn Antenna from 0.7 to 18 GHz | |
Horn Antenna
from AH Systems Inc
|
| The SAS-571 from AH Systems is a double rigid Horn Antenna that operates from 0.7 to 18 GHz with a nominal 15 dBi of gain. This horn antenna can handle up to 300 W of power, has a VSWR of 1.6:1 (3.5:1 max) and is available with an N Type - Female connector. It is ideal for EMI measurements and compliance testing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP67/IP68-Rated Waterproof RF and Microwave Connectors | |
RF Connector
from IntelliConnect
|
| The Pisces Series are waterproof connectors from IntelliConnect that have been developed for use in mil-aerospace, SCADA, marine, medical, transportation, and oil and gas applications. These IP67 and IP68 rated connectors are sealed internally and are therefore waterproof when unmated. They are available in various connector formats that include: ABMS (Rugged MCX), N-Type, Push-Pull, TNC, and SMA.ABMS is a special sub-miniature connector interface originally designed for use with cochlear implants. |
| |
Download Datasheet
Product Details | |
|
|
|
| FPGA-Based Digital Signal Booster from 758 to 869 MHz | |
RF Repeaters
from Fiplex Communications
|
| The HONBDA-A-7S27B from Fiplex is a Digital Signal Booster that operates from 758 to 869 MHz covering the 700 and 800 MHz public safety bands. It has a passband bandwidth of 100 kHz, provides a gain of 85 dB and an antenna isolation of 20 dB. This FPGA-based signal booster has oscillation detection with alarm and auto-shutdown, an antenna isolation measurement feature and an antenna isolation alarm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1+1 Redundant L-Band Rackmount Amplifier System from 950 to 2150 MHz | |
SATCOM Amplifier System
from RF-Design
|
| The HQR245C-FT from RF Design is a 1+1 Redundant Rackmount Amplifier System that operates from 950 to 2150 MHz. It consists of two amplifiers, each providing a variable gain from 0 to 40 dB in 0.1 dB steps, with a noise figure of 3 dB and has an output P1dB of more than +21 dBm. The system can be used as a 1+1 redundant RF line amplifier or 2 single high-precision amplifiers. |
| |
Download Datasheet
Product Details | |
|
