| New RF and Microwave Products this Week . |
|
|
| Upconverter and Downconverter for 5G Radios from 24 to 29.5 GHz | |
RF Up-down Converter
from Analog Devices
|
| The ADMV1128A from Analog Devices is a Microwave Upconverter and Downconverter that is designed for 5G radios from 24 to 29.5 GHz. It has an integrated upconverter (a transmitter), a downconverter (a receiver), and a LO chain with options of a 2x or 4x multiplier in one chip. Both upconverters and downconverters offer two modes of frequency translation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Throw Electromechanical Switch from DC to 40 GHz | |
RF Switch
from Teledyne Relays
|
| The CCR-48K from Teledyne Defense Electronics is an SP3T/SP4T/SP5T/SP6T Multi-throw, Electromechanical Switch that operates from DC to 40 GHz. It provides more than 50 dB of isolation, has an insertion loss of less than 1.5 dB and a VSWR of under 2.10:1. This switch has an actuation voltage of 12 / 28 V with up to 400 mA of actuation current. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 6-Port Vector Network Analyzer from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SN5090-6 from Copper Mountain Technologies is a 6-port Vector Network Analyzer that operates from 300 kHz to 9 GHz. This VNA utilizes precise calibration methods with an automatic calibration mechanism to measure signal parameters with the smallest uncertainty and efficiently characterize various active and passive Device Under Tests (DUTs). It can measure all s-parameters and supports linear frequency, log frequency, segment and power sweep types. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz to 26 GHz Real-Time Phase Noise Analyzer | |
Phase Noise Analyzer
from Holzworth Instrumentation
|
| The HA7062D from Holzworth is a real-time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It has a real-time engine that covers the full measurement bandwidth with extremely fast measurement speeds to reduce product development time and optimize ATE manufacturing throughput. Holzworth has architected the instrument’s front end so that the noise floor limits can actually be measured. |
| |
Download Datasheet
Product Details | |
|
|
|
| 80 K (Noise Temperature) Ka-Band Low Noise Block Downconverter | |
Low Noise Block
from AmpliTech, Inc.
|
| The APT5-LNB-17801930-92K10-WR42 from Amplitech is a Ka-Band Low Noise Block Downconverter that converts an RF Frequency from 17.8-19.3 GHz to 920-2420 MHz. It provides over 55 dB of gain with an ultra-low noise temperature of 80K (1.05 dB NF). This ultra-compact block downconverter is ideal for LEO, MEO, GEO fixed and portable Ka-band teleport applications. It measures 5.5 x 2.5 x 2.5 inches, has a WR-42 Waveguide interface and SMA female connector. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 40 dB Directional Coupler from 380 to 960 MHz | |
Directional Coupler
from MECA
|
| The 715-40-0.670 from MECA is a Directional Coupler that operates from 380 to 960 MHz. This 40 dB coupler has a directivity of more than 25 dB and has an insertion loss of less than 0.1 dB. It can handle an average input power of 500 W, a peak input power of up to 10 kW, and has a VSWR of less than 1.15:1. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2-Way Power Divider from 500 to 6000 MHz | |
Power Divider
from Werbel Microwave
|
| The WM2PD-0.5-6-N from Werbel Microwave is a 2-Way Power Divider that operates from 500 to 6000 MHz. It can handle a CW input power of up to 50 W, provides an isolation of more than 15 dB, and has an insertion loss of less than 0.9 dB. This power divider has an amplitude balance of 0.2 dB and a phase balance of 2°. It exhibits excellent VSWR performance over an operating temperature range from -55°C to +85°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Channel Receiver Multicouplers from 896 to 960 MHz | |
Multicoupler
from Comprod
|
| The XRM-90-XX from Comprod are Multi-Channel Receiver Multicouplers that operate from 896 to 960 MHz. They are available in 2, 4, 8, 12, 16, and 32 port configurations and can combine multiple receiver frequencies onto the same antenna. These Multicouplers integrate an amplifier that provides a gain of up to 32 dB with a noise figure of 1.3 dB, and a splitter that offers a port-to-port isolation of more than 23 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 250 W Solid-State Power Amplifier from 26.5 to 40 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP4066B-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 26.5 to 40 GHz. It delivers a CW/Pulsed output power of 250 W with a gain of more than 53 dB. This Class A/AB amplifier has spurious levels of less than -60 dBc and harmonics of -20 dBc. It is ideal for EMI/RFI, lab, CW/Pulse, and other EW communication applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| High-Speed EMI Test Receiver from 1 Hz to 44 GHz | |
EMI Receiver
from Rohde & Schwarz
|
| The R&S®ESW44 from Rohde & Schwarz is an EMI Test Receiver that operates from 1 Hz to 44 GHz. It meets the most stringent requirements in line with CISPR, EN, MIL-STD-461, DO-160, and FCC standards. This test receiver includes a low-noise and built-in preselection with 21 filters to enable accurate and reliable measurements for EMI compliance testing. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Analog Signal Generators from 9 kHz to 6 GHz | |
Signal Generator
from Keysight Technologies
|
| The N5171B EXG X-Series from Keysight Technologies are RF Analog Signal Generators with a frequency range from 9 kHz to 6 GHz. They can generate sine, square, triangle and positive/negative ramp waveforms with an SSB phase noise of -133 dBc/Hz (at 20 kHz offset) and a frequency resolution of 0.001 Hz. These signal generators can perform basic parametric testing of components and functional verification of receivers with industry-leading output power. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Antenna Mount Solid-State Block Up-Converter from 27 to 31 GHz | |
Block Up Converter
from Spacepath Communications
|
| The STS20/40Ka from SpacePath Communications is a solid-state Block Up Converter (BUC) that converts input frequencies from 950-1950 MHz to output frequencies from 27-31 GHz. It provides more than 60 dB of gain with a gain adjustment range of 20 dB. This BUC has a phase noise of 93 dBc/Hz (at 100 kHz offset) and spurious levels of less than -55 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 802.11ad mmWave Phased Array Antenna Module from 57 to 71 GHz | |
RF Module
from Peraso Technologies, Inc
|
| The PRM2144X from Peraso is a mmWave Antenna Module that operates from 57 to 71 GHz. It has a channel bandwidth of 1.08 or 2.16 GHz and supports the IEEE 802.11ad standard with advanced features for long-range, outdoor applications. This module utilizes the Peraso X720 IEEE 802.11ad 60 GHz phased array chipset which includes the PRS4601 B2E baseband processor and a high-power mmWave beamforming transceiver RFIC. |
| |
Download Datasheet
Product Details | |
|
|
|
| 96-Channel Encrypted Airborne GPS Receiver for L1 and L2 bands | |
GNSS Module
from BAE Systems
|
| The Airborne SAASM Receiver (ASR) 3.7-DS from BAE Systems is an Airborne GPS Receiver for L1 and L2 bands. It has 96 channels (48 hardware channels per thread) and hosts individual civil and military receivers on a single ASR form factor board. This receiver has a Wide Area Augmentation System (WAAS) capability for extremely accurate positioning. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 30 V Inner DC Block from 160 kHz to 95 GHz | |
DC Block
from HYPERLABS
|
| The HL9438 from HYPERLABS is an Inner DC Block that operates from 160 kHz to 95 GHz. It has a breakdown voltage of up to 30 V and an insertion loss of less than 2 dB. This DC block has an amplitude match of ±0.1 dB and a phase match of ±4° (at 40 GHz). It is available in a module that measures 29 x 9.57 x 9.57 mm and has 1.0 mm jack/plug connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz SOI Front-End Module for IoT Applications | |
Front End Module
from pSemi, A Murata Company
|
| The PE562212 from pSemi is a 2.4 GHz SOI Front-End Module for Thread/Zigbee®/Bluetooth®/ Wi-Fi® IoT applications. It has an integrated power amplifier with an output power of up to 21 dBm and an integrated low-noise amplifier (LNA) with a noise figure of 1.5 dB along with a low-loss bypass path. This FEM is manufactured on pSemi’s UltraCMOS silicon-on-insulator (SOI) process and has a compact monolithic IC design, making it suitable for use in PCBs with limited space. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 15 W Qi 2.0 Compatible, In-Cabin Automotive Wireless Charging IC | |
Wireless Charging Transmitter
from indie Semiconductor
|
| The iND87200 from indie Semiconductor is an In-Cabin Automotive Wireless Charging IC that is compliant with Qi 1.3.2 and compatible with Qi 2.0. It supports the emerging maximum power point (MPP) wireless charging feature and has an integrated boost converter that can deliver up to 15W of power across the entire VBAT operating range. |
| |
Download Datasheet
Product Details | |
|
