| New RF and Microwave Products this Week . |
|
|
| 7 GHz Wireless Connectivity Test Set for Wi-Fi 7 and Cellular 5G Networks | |
RF Test Set
from Keysight Technologies
|
| The E7515W from Keysight Technologies is a UXM Wireless Connectivity Test Platform. It has been designed to support Wi-Fi-to-Cellular internetworking testing of both Wi-Fi clients (STAs) and access points (APs) from 380 MHz to 7.125 GHz (frequency resolution of 1 Hz). This test platform adds support for Wi-Fi 7 testing and enables advanced Wi-Fi/cellular co-existence testing and unique testing of 5G fixed wireless access (FWA) devices. |
| |
Download Datasheet
Product Details | |
|
|
|
| YIG Based Multi-Channel RF Signal Synthesizers from 10 MHz to 40 GHz | |
Frequency Synthesizer
from Holzworth Instrumentation
|
| The HSY Series from Holzworth are YIG-based RF Signal Synthesizers that operate from 10 MHz to 3/6/12/24/40 GHz. They are available in 1, 2, 3 or 4 channel options, with each channel having an accurate dynamic range from -110 to +20 dBm. The synthesizers have a frequency step size of 0.001 Hz, a phase offset resolution of 0.1º, and a switching speed of less than 10 ms. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8.5 GHz VNA with Metrology-Grade Performance | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The M5090 from Copper Mountain Technologies is a 2-port, 8.5 GHz Vector Network Analyzer that delivers metrology-grade performance. This computer-controlled VNA has a dynamic range of 130 dB, a measurement speed of 70 µs and can be used to measure all four S parameters (S11, S21, S12, S22). The ports are matched to 50 ohms. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rackmount Signal Generator from 9 kHz to 70 GHz | |
Signal Generator
from Anritsu
|
| The MG36271A from Anritsu is an RF/Microwave Signal Generator with a frequency range from 9 kHz to 70 GHz. It has an atomic clock for frequency stability and an optional internal rubidium frequency reference. This generator can also lock an internal oven-controlled crystal oscillator (OCXO) reference to an external GNSS/GPS signal to provide exceptional frequency stability. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Ruggedized Ground Data Terminal from 14.4 to 15.35 GHz | |
SATCOM Terminal
from Cubic
|
| The Mantis II from Cubic is a Ground Data Terminal that operates from 14.4 to 15.35 GHz. It supports long-range, high-data-rate communications with airborne platforms equipped with a multitude of DoD standard Common Data Link (CDL) waveforms. This terminal provides an operating range of up to 250 nmi or more (depending on system configuration) and delivers a full-duplex data rate from 200 Kbps to 44.73 Mbps. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Aaronia AG | | The new SPECTRAN® V6 ECO | | Aaronia presents the SPECTRAN® V6 XPLORER, the first USB spectrum analyzer for microwave applications > 100GHz. It is designed to provide a cost-effective development and validation platform for all millimeter-wave applications, including those with the shortest signal transmissions. Despite its compact size and light weight, its sampling speed is virtually unmatched. Preorder now! | | | |
|
|
|
|
|
|
|
| 2-Way SPDT Smart Switch from 850 to 2150 MHz | |
RF Switch
from ETL Systems
|
| The CST-POE-SW02-1059 from ETL systems is a 2-Way SPDT Smart Switch that operates from 850 to 2150 MHz. This switch can be powered and remote-controlled via an ethernet port. It can handle an input power of up to 10 dBm (~10 mW), has an insertion loss of 3 dB, and provides isolation of more than 65 dB. This switch is ideal for L-Band Satellite ground applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Profile Ceramic Core Chip Inductors from 1 to 56 nH | |
RF Inductor
from Coilcraft
|
| The 0603CT Series from Coilcraft are Low-Profile Ceramic Core Chip Inductors available in inductance values from 1.0 to 56 nH. They have Q-factors up to 95, a self-resonant frequency (SRF) of 16.0 GHz and a DC resistance of less than 0.700 ohms. These inductors are available in surface-mount packages that measure 1.63 x 0.84 x 0.61 mm with Tin over Ni over Ag-Pt-glass frit termination. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 64T64R MIMO 5G Backhaul Radio from 3.55 to 3.7 GHz | |
Microwave Backhaul Radio Links
from AGTGSS
|
| The 64TR mMIMO from AmpliTech Group True G Speed Services (AGTGSS) is a Backhaul Radio that operates from 3.55 to 3.7 GHz. It has a bandwidth of up to 100 MHz and supports QPSK and 16/64/256 QAM modulation schemes. This radio supports TDD duplex mode and 64T64R MIMO. It is a “plug-n-play” solution for P5G and local carriers and offers benefits such as rapid deployment, flexibility, cost-effectiveness, localized high-speed connectivity, enhanced security, and interoperability. |
| |
Download Datasheet
Product Details | |
|
|
|
| True RMS Waveguide Power Sensor from 50 to 75 GHz | |
RF Power Meter & Sensor
from LadyBug Technologies
|
| The LB5975W from LadyBug Technologies is a True RMS Power Sensor that operates from 50 to 75 GHz. It has a dynamic range from -50 dBm to +18 dBm and provides accurate power measurements of up to +18 dBm or 63 mW (continuous/pulsed) on any modulated signal with any modulation type. This power sensor can measure up to 384 samples per measurement and has a measurement time of less than 38.4 ms per average. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 20 dB Directional Coupler from 4 to 50 GHz | |
Directional Coupler
from KRYTAR
|
| The 104050020 from KRYTAR is a Directional Coupler that operates from 4 to 50 GHz. This 20 dB coupler has a directivity of more than 10 dB and an insertion loss of less than 1.7 dB. It can handle an average input power of 20 W and a peak input power of 3 kW. The coupler is available in a module that measures 1.75 x 0.4 x 0.65 inches with 2.4 mm (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 dB, 90° Hybrid Coupler from 7.5 to 16 GHz | |
90 Degree Hybrid Coupler
from MECA
|
| The 705S-11.750 from MECA is a 90° Hybrid Coupler that operates from 7.5 to 16 GHz. It provides an isolation of 17 dB and has a coupling loss (including insertion loss and frequency sensitivity) of 3.4 dB. The coupler can handle an input power (CW) of 40 W, a peak power of 2 kW, and has a phase balance of ±4°. It is available in a rugged aluminum module that measures 1 x 1.34 x 0.38 inches with SMA-type female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Electromagnetic Analysis Tool for Predicting Radar Cross Section | |
Software
from Remcom
|
| XGtd from Remcom is a Ray-Based EM Simulation Software for assessing the effects of a vehicle or vessel on antenna radiation, predicting coupling between antennas and predicting radar cross section (RCS). It incorporates techniques including Geometric Optics (GO), the Uniform Theory of Diffraction (UTD), Physical Optics (PO), and the Method of Equivalent Currents (MEC). |
| |
Download Datasheet
Product Details | |
|
|
|
| Low SWaP Dual-Channel Software Defined Radio from 45 MHz to 6 GHz | |
Software Defined Radio
from Epiq Solutions
|
| The Matchstiq Z3u from Epiq Solutions is a Dual-Channel Software Defined Radio (SDR) that operates from 45 MHz to 6 GHz. It combines an RF front-end with integrated pre-select filters, Zynq UltraScale+ MPSOC (CPU + FPGA), RFIC, memory units (2 GB RAM + 128 GB eMMC with microSD card slot), PLL, TCVCXO, DAC, internal and external interfaces, power supplies, status indicators, switches, and antennas. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| GaAs Absorptive SPDT Switch MMIC from DC to 30 GHz | |
RF Switch
from Mini Circuits
|
| The M3SWA2-34DR+ from Mini-Circuits is a GaAs Absorptive SPDT Switch MMIC that operates from DC to 30 GHz. It has an insertion loss of 0.6 dB, provides more than 68 dB of isolation, and can handle an input power of 25.2 dBm. This switch has a rise time of 6.9 ns and a fall time of 7.1 ns. It consists of an internal driver that is designed for wideband operation and offers fast, nanosecond switching operation with no gate lag effects. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| mmWave, Automotive Radar Sensor Module from 60 to 64 GHz | |
Radar Sensor
from Murata
|
| The Type 1VM from Murata is an mmWave Radar Sensor Module that operates from 60 to 64 GHz. It utilizes a Texas Instruments AWR6843 chipset (including C674x DSP for advanced signal processing) with ARM Cortex-R4F CPU core, 16M-bit Serial Flash Memory and built-in optimized patch antennas. This module is optimized for in-cabin sensing like CPD and OMS and can precisely detect distance, angle of arrival and velocity between target objects in harsh environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| GaAs Non-Reflective SPDT Switch MMIC from 26.5 to 40 GHz | |
Waveguide Switch
from Renaissance Electronics Corporation
|
| The HSWM22801-351 from Renaissance Electronics Corporation is a Non-Reflective SPDT Switch MMIC that operates from 26.5 to 40 GHz. It can handle an input power of up to 10 W (~40 dBm) and has an insertion loss of less than 3.1 dB. The switch supports TTL control, has a switching speed of 30 ns and provides more than 38 dB of isolation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Reflective SP10T Switch Module from DC to 18 GHz | |
RF Switch
from Withwave
|
| The WM1018NKU form Withwave is an SP10T Switch Module that operates from DC to 18 GHz. It has a switching time of 200 µs and provides an isolation of up to 30 dB. This reflective switch can handle a CW input power of up to 25 W and has an insertion loss of less than 3.5 dB. It uses Menlo Microsystems’ Ideal Switch® technology and is an ideal solution for RF signal routing in wireless infrastructure and wireless applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Reflective Silicon SP8T Switch from 100 MHz to 20 GHz | |
RF Switch
from Analog Devices
|
| The ADRF5080 from Analog Devices is a Reflective Silicon SP8T Switch that operates from 100 MHz to 20 GHz. This switch can handle RF input power of up to 33 dBm and has an insertion loss of less than 2.0 dB. It has a rise/fall time of 15 ns, a switching ON/OFF time of 55 ns, and provides up to 50 dB of isolation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface-Mount, 75-Ohm 1:1 RF Balun from 45 to 1218 MHz | |
Balun
from Qorvo
|
| The QPP0021 from Qorvo is a 1:1 RF Balun that operates from 45 to 1218 MHz. It converts a 75-ohm balanced input to a 75-ohm unbalanced differential output with a phase balance of ±7° and an amplitude balance of ±1.4 dB. This balun can handle an input power of up to 36 dBm (~4 W) and has an insertion loss of 0.4 dB. The balun is available in a surface-mount SP5 package and is ideal for broadband / CATV, mobile infrastructure and general-purpose wireless applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE Cat 1 Modules for M2M and IoT Applications | |
Cellular Module
from Quectel
|
| The LTE EG915U Series from Quectel are LTE Cat 1 Modules optimized for M2M and IoT applications. They deliver maximum data rates of 10 Mbps in downlink and 5 Mbps in uplink. These modules are available in three variants: EG915U-CN, EG915U-EU, and EG915U-LA, covering the frequency bands of different countries and regions. |
| |
Download Datasheet
Product Details | |
|
