Featured Products this Week . |
|
|
Open-Source Software-Defined Radio from 100 kHz to 3.8 GHz |
Software Defined Radio
from Lime Microsystems
|
The LimeSDR from Lime Microsystems is a Software-Defined Radio (SDR) that operates from 100 kHz to 3.8 GHz. It employs a Lime Microsystems LMS7002M MIMO FPRF chipset, has a bandwidth of 61.44 MHz and supports 2x2 MIMO multiplexing. This low-cost, open-source SDR integrates the Snappy Ubuntu Core to enable easy download of LimeSDR apps from developers around the world. |
|
Download Datasheet
Product Details | |
|
|
|
Ethernet-Powered 8-Way Smart Switch from 850 to 2150 MHz |
RF Switch
from ETL Systems
|
The CST-POE-SW08-1083 from ETL Systems is an 8-Way Smart Switch that operates from 850 to 2150 MHz. It can handle an input power of up to 10 dBm (~10 mW), has an insertion loss of less than 6 dB, and provides an isolation of more than 65 dB. This switch is suitable for 1x8 or 8x1 switching. It is PoE 802.3af compliant with power and remote control via an Ethernet port and consumes less than 6 W of power. |
|
Download Datasheet
Product Details | |
|
|
|
LDMOS Power Amplifier/Signal Source Module from 2.4 to 2.5 GHz |
Signal Generator
from Mini Circuits
|
The RFS-2G42G5050X+ from Mini-Circuits is a Solid-State Signal Source Module that operates from 2.4 to 2.5 GHz. It has a signal generator that can support different types of applications and can also be used as a stand-alone high-power amplifier. This signal source can be configured to operate as a high-power amplifier, delivering a CW/pulsed output power of up to 50 W (47 dBm) with a power gain of 51.5 dB and an efficiency of 42%. |
|
Download Datasheet
Product Details | |
|
|
|
5G-NR Low-Noise Diversity Receive Module from 3.3 to 4.2 GHz |
Front End Module
from Skyworks Solutions
|
The SKY53761-11 from Skyworks is a 5G NR Diversity Receive Module that operates in the n77/78 bands from 3.3 to 4.2 GHz. It utilizes the latest advanced SOI process technologies to achieve exceptional high-bandwidth, low-noise figure (NF) LNA performance. This module has integrated multi-mode, variable gain LNA that works with all 5G chipsets. |
|
Download Datasheet
Product Details | |
|
|
|
2.4/5/6 GHz Low-Power Dual 2x2 320 MHz Wi-Fi 7 SoC Processor |
Wireless Chipset
from Broadcom
|
The BCM6765 from Broadcom is a 2.4/5/6 GHz Wi-Fi 7 SoC Communications Processor. It enables low-power, small form factor multi-Giga-bit access points, routers, repeaters, and service provider gateways for residential applications. This SoC consists of a dual 802.11be 2x2 MIMO WLAN radio support, quad-core ARM v8 CPU, 2.4 GHz power amplifiers (PAs), digital pre-distortion (DPD) external front-end modules (FEMs), additional support for a third radio, and an 802.3-compliant 10 Giga-bit Ethernet PHY interface. |
|
Download Datasheet
Product Details | |
|
|
|
High-Performance Remote Wideband Recorder & Receiver from 9 kHz to 18 GHz |
RF Spectrum Recording and Playback System
from CRFS
|
The RFeye SenS Remote 100-18 from CRFS is a Remote Spectrum Receiver with I/Q Recording that operates from 9 kHz to 18 GHz. It combines the RF and edge-processing capabilities of the RFeye Node 100-18 together with the high-speed recording feature of the RFeye SenS family. This recorder can perform all the functions of a standard RFeye Node but with the addition of full-rate wideband I/Q streaming (100 MHz IBW). |
|
Download Datasheet
Product Details | |
|
|
|
50 V, Bias Tee from 0.1 to 67.0 GHz |
Bias Tee
from Focus Microwaves Inc
|
The BT0167-1-N from Focus Microwaves is a Bias Tee that operates from 0.1 to 67 GHz. It can handle up to 1 W of RF Power and has an insertion loss of 3.2 dB. This bias tee can handle a DC voltage of 50 V and a maximum current of 1 A. It has a DC sense port for accurately measuring the incident DC voltage and can be used for wideband modulation where attention is needed to terminate the impedances seen at the baseband frequencies. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Surface-Mount Zero Bias Schottky Diode Detector from 2 to 18 GHz |
RF Detector
from Linwave Technology
|
The LW48-99999 from Linwave Technology is a Zero Bias Schottky Diode Detector that operates from 2 to 18 GHz. It can handle an input power of up to 10 dBm, has a voltage sensitivity of 1700 mV/mW, and a TSS of -58 dBm. This detector has a rise time of 1 µs and a fall time of 1.2 µs. It is available in a surface-mount QFN package that measures 3 x 3 mm. |
|
Download Datasheet
Product Details | |
|
|
|
3 dB, 90° Hybrid Coupler from 12 to 18 GHz |
90 Degree Hybrid Coupler
from Pulsar Microwave
|
The QS2-11-463/2S from Pulsar Microwave is a 90° Hybrid Coupler that operates from 12 to 18 GHz. This 3 dB coupler provides more than 15 dB of isolation and has an insertion loss of 0.8 dB. It has an amplitude balance of ±1.4 dB and a phase balance of ±8°. The coupler is available in a module that measures 1.00 x 0.50 x 0.38 inches and has SMA connectors. |
|
Download Datasheet
Product Details | |
|
|
|
5G Antenna Module from 24.25 to 27.5 GHz with Built-in Front-End Module |
Front End Module
from Doosan Corporation Electro-Materials
|
The DS-MV_26 from Doosan Corporation is a 5G Antenna Module that operates from 24.25 to 27.5 GHz. This dual polarized (horizontal/vertical) antenna module has an EIRP of 38 dBm and an azimuth/elevation beam scan range of ±60°. It provides 48 dB of gain in Tx mode and 42 dB of gain in Rx mode. The antenna module incorporates an RF front-end module with a 32-array antenna and beamforming IC. |
|
Download Datasheet
Product Details | |
|
|
|
Non-Reflective, mmWave Silicon SPDT Switch from 100 MHz to 45 GHz |
RF Switch
from Analog Devices
|
The ADRF5022 from Analog Devices is a Silicon SPDT Switch that operates from 100 MHz to 45 GHz. It has an ON/OFF switching time of 20 ns, provides an isolation of up to 60 dB and has an insertion loss of less than 2.3 dB. This non-reflective switch can handle an RF input-power of 30 dBm for the through path, 24 dBm for the terminated path, and 30 dBm for the hot switching at the RF common port. |
|
Download Datasheet
Product Details | |
|
|
|
Military-Grade SAW Bandpass Filter with Passband from 902 to 928 MHz |
Band Pass Filter
from Southwest Antennas
|
The 1080-210 from Southwest Antennas is a Standalone SAW Bandpass Filter with a passband from 902 to 928 MHz. It has a passband insertion loss of less than 3.5 dB and provides an out-of-band rejection of -40 dBc (at 880 MHz). This filter has been designed to be installed in-line into a system when additional RF filtering is required to improve the system performance and is suitable for operation in congested, high-interference RF environments. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
4-Channel Monitoring Receiver from 20 to 520 MHz for EW/SIGINT Applications |
RF Monitoring Receiver
from Novator Solutions
|
The HUGIN 304DF from Novator Solutions is an RF Monitoring Receiver that operates from 20 to 520 MHz (optional range of 0.5 to 6 GHz). It has a two-stage superheterodyne Rx architecture with 4 receiver channels with an instantaneous bandwidth of 80 MHz each. This receiver also has 60 audio channels and 4 IQ channels (a total of 64 DDRs) enabling simultaneous monitoring, listening, and recording of analog clear voice Push to Talk (PTT) communication using FM, AM, or SSB modulation. |
|
Download Datasheet
Product Details | |
|
|
|
Rugged 50 W Power Amplifier from 115 to 420 MHz for LOS Radios |
RF Amplifier
from General Dynamics Mission Systems
|
The UPA-55 from General Dynamics is an RF Power Amplifier that operates from 115 to 174 MHz (VHF) and 225 to 420 MHz (UHF). It delivers an output power of up to 50 W in AM, FM, FSK, or continuous wave (CW) modulations. This amplifier has spurious emissions of better than -80 dBc, harmonics of -60 dBc, and a noise floor of -140 dBm/Hz. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Vector Signal Generator and GNSS Simulator from 8 kHz to 6 GHz |
GNSS Simulator
from Rohde & Schwarz
|
The R&S®SMBV100B from Rohde & Schwarz is a Vector Signal Generator with a frequency range from 8 kHz to 6 GHz. It has an excellent EVM performance even at high output power levels and achieves an EVM value of less than 0.4 % for an LTE signal with +18 dBm (RMS) output power. This signal generator can produce an output power of up to +34 dBm (1 GHz) and up to +31 dBm (6 GHz). |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
4-Channel Arbitrary Waveform/Pattern Generator from DC to 6 GHz |
Arbitrary Waveform Generator
from Active Technologies SRL
|
The AWG5064 from Active Technologies is a 4-channel Arbitrary Waveform/Pattern Generator with a frequency range from DC to 6 GHz. It has been designed for mixed signal generation across four analog channels and can be used as a function generator, arbitrary generator, serial pattern generator, and digital pattern generator. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
4G/5G MIMO Dipole Antenna from 400 to 6000 MHz |
Antenna
from Taoglas
|
The TGX.04.W.A.001 from Taoglas is a 4G/5G MIMO Dipole Antenna that operates from 400 to 6000 MHz. This cross-polarized antenna has an omnidirectional radiation pattern and has a VSWR of 2:1. It uses four dipole antennas for improved throughput and quality improvements in transmitting and receiving signal levels for better coverage and performance in urban environments. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Washable and Rugged UHF RFID Tags for Flat Linen Applications |
RFID Tag
from Fujitsu
|
The Softight W5RL from Fujitsu is a UHF RFID Tag designed for superior performance and durability for flat linen applications. This rugged tag can withstand high-pressure extractors, industrial washing and drying, and rugged environments without losing performance, all in a cost-effective package. It can withstand 200 wash cycles and is chemically resistant to standard detergent, softener, bleach (Oxygen/ Chlorine), Alkali, and acetic/peracetic acid. |
|
Download Datasheet
Product Details | |
|