| New RF and Microwave Products this Week . |
|
|
| Up-Down Converter and Beamformer for 5G mmWave Applications | |
RF Up-down Converter
from Analog Devices
|
| The ADMV1239 from Analog Devices is an Up-Down Converter and Beamformer that operates from 37 to 43.5 GHz. It integrates a 16 (2x8) channel beamformer paired with a 2 transmit (TX) and 2 receive (RX) channel upconverter/downconverter (UDC). This RFIC has on-chip transmit-receive switches that connect the upconverter RF output and downconverter RF input for each polarization into eight independent channels via the 1x8 power splitters/combiners. |
| |
Download Datasheet
Product Details | |
|
|
|
| 520 MHz, 6.5 W Silicon Power MOSFET for VHF/UHF Radio Applications | |
RF Transistor
from Mitsubishi Electric US, Inc.
|
| The RD06LUS2 from Mitsubishi Electric is a 520 MHz Silicon Power MOSFET. It delivers an output power of 6.5 W with a drain efficiency of 65%. This transistor integrates a gate protection diode for reliability. It requires a DC supply of 3.6 V. This RoHS-compliant transistor is available in a surface-mount package that measures 8.00 x 4.90 x 0.75 mm and is ideal for VHF/UHF RF power amplifier and mobile radio set applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Reflectionless Bandpass Filter MMIC with Passband from 18.5 to 21.2 GHz | |
Band Pass Filter
from Marki Microwave
|
| The MFQH-00001PSM from Marki Microwave is a Passive Bandpass Filter MMIC with a passband from 18.5 to 21.2 GHz. It has a center frequency of 19.8 GHz with an insertion loss of 3.2 dB (at the center frequency) and provides a stopband suppression of up to 62 dB. This reflectionless BPF provides excellent return loss for rejected signals as well as in the passband and is suitable for applications that demand high signal fidelity. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bandpass Filter MMIC with Passband from 10.5 to 13.15 GHz | |
Band Pass Filter
from AmpliTech
|
| The AGM-010 from AmpliTech is an MMIC Band Pass Filter with a passband from 10.5 to 13.15 GHz. It can handle an input power of 20 dBm (0.1 W) and has an insertion loss of 2.9 dB in the passband. This 50-ohm filter provides over 30 dB of rejection above and below the passband. It is available as a bare die that measures 1.00 x 0.750 x 0.1 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2-Way MLDD Power Divider from 4 to 40 GHz | |
Power Divider
from KRYTAR
|
| The 6040400 from KRYTAR is a 2-Way Power Divider that operates from 4 to 40 GHz. It can handle an input power of 10 W, provides an isolation of more than 14 dB, and has an insertion loss of less than 2.1 dB. This power divider uses an MLDD (matched-line directional dividers) proprietary design to provide ultra-high performance over a broad frequency range. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by IMS 2024 | | "Capitol"ize on Your IMS2024 Experience! Register Now! | | The IEEE MTT-S IMS2024 is the must-attend event the microwave and RF community. In one week, you can gain the knowledge you need to achieve your professional goals for the entire year. Technical program highlights include systems & applications, aerospace & defense, spectrum coexistence & sustainability and emerging technologies. Join us in Washington, DC., 16-21 June 2024! Register Now! | | | |
|
|
| 50 dB Dual-Directional Coupler from 20 MHz to 1 GHz | |
Dual Directional Coupler
from Innovative Power Products
|
| The IPP-8070 from Innovative Power Products is a Dual-Directional Coupler (DDC) that operates from 20 to 1000 MHz. This 50 dB coupler has a directivity of more than 20 dB and an insertion loss of less than 0.3 dB. It can handle an input power of up to 200 W and has a VSWR of less than 1.30:1. The coupler is available in a surface-mount package that measures 31.750 x 19.050 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4x4 Blocking Matrix Switch from DC to 26.5 GHz | |
Switch Matrix
from JFW Industries
|
| The 50MS-455 from JFW Industries is a 4x4 Blocking Matrix Switch that operates from DC to 26.5 GHz. It can handle an input power of 50 W (average) and has an insertion loss of 5.5 dB. This switch matrix has a switching speed of 20 ms and provides 100 dB of isolation. It is constructed using switches on both halves of the matrix and allows one input port to be set to only one output port at a time. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Low Noise Amplifier from 20 to 26.5 GHz | |
RF Amplifier
from Quantic PMI (Planar Monolithics)
|
| The PE2-30-20G20R6G-3R0-10-12-SFF from Quantic PMI (Planar Monolithics) is a Low Noise Amplifier (LNA) that operates from 20 to 26.5 GHz. It provides a gain of 30 dB with a noise figure of less than 3 dB and has an output P1dB of more than 10 dBm. This LNA is enclosed in Quantic PMI’s standard PE2 housing with SMA connectors or as a surface-mount component. |
| |
Download Datasheet
Product Details | |
|
|
|
| Tunable RF Inductors with Aluminum Core from 9 to 280 nH | |
RF Inductor
from Coilcraft
|
| The Unicoil 5 mm Series from Coilcraft are Tunable RF Inductors with inductance values from 9 to 280 nH. These inductors have an aluminum core to enable tuning and can be tuned with Coilcraft’s 3-in-1 “TriTuner” tuning wrench. The windings of these inductors are precision molded into plastic for mechanical and electrical stability and offer the low drift reliability of an insert molded coil. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact USB VNA from 9 kHz to 8.5 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The S5085 is a 2-Port Vector Network Analyzer from Copper Mountain Technologies that operates from 9 KHz to 8.5 GHz. It can measure all four S parameters S11, S12, S21, S22 and provides a wide variety of analysis capabilities, including time-domain with gating and frequency offset modes. This lab grade VNA is available in a compact package and can be controlled with a Windows or Linux based PC, laptop, tablet, or x86 board computer connected to the measurement hardware via a USB interface. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| USB-Powered Programmable RF Signal Generator from 14 to 30 GHz | |
Signal Generator
from DS Instruments
|
| The SG30000L from DS Instruments is an RF Signal Generator with a frequency range from 14 to 30 GHz. It provides an output power from -18 dBm to +13 dBm and has harmonics of less than -20 dBc. This signal generator has an amplitude resolution of 0.5 dB (calibrated digital steps) and 0.1 dB (sub-step vernier – uncalibrated) and a frequency step size of 2 Hz. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Medium Data Rate LTE Cat 1.bis Modules for Space-Constrained Applications | |
Cellular Module
from u-blox AG
|
| The LEXI-R10 Series from u-blox are LTE Cat 1.bis Modules that are designed for size-constrained devices. They support multi-band LTE-FDD and can connect with LTE Cat 1 networks. These modules are qualified according to the u-blox qualification policy, based on the AEC-Q104 standard. They are available in two variants: the LEXI-R10401D which is designed for use in the Americas and the LEXI-R10801D which is designed for use in the EMEA and APAC regions. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3GPP Rel-17 5G RedCap Modules for IoT Applications | |
Cellular Module
from Quectel
|
| The RG255G Series from Quectel are 5G RedCap Modules. They are based on the 3GPP Release 17-compliant RedCap technology and support both LTE Cat 4 and 5G Sub-6 GHz standalone (SA) modes, providing efficient 4G/5G global coverage. These modules are backward compatible with Release 15 and 16 networks and partial compatibility with Quectel’s 4G EG2x/EC2x series 4G modules with smaller sizes. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5/6 GHz Integrated Wi-Fi 7 + Bluetooth® 5.4 + UWB Module | |
Wireless Chipset
from Qualcomm
|
| The FastConnect 7900 from Qualcomm is a 2.4/5/6 GHz Integrated Wi-Fi 7 + Bluetooth® 5.4 + Ultra-Wideband (UWB) Module. It supports a range of technologies to enable users with comprehensive proximity awareness capabilities. This module implements High Band Simultaneous (HBS) Multi-Link with UWB and Bluetooth Channel Sounding to seamlessly find nearby devices like earbuds, smart tags, or other mobile devices. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Power, Secure UWB (Ultra-Wideband) SoC from 4 to 9 GHz | |
Wireless Chipset
from Shenzhen Giant Microelectronics
|
| The GT1500 from GiantSemi is an Ultra-Wideband (UWB) System-on-Chip (SoC) that operates from 4 to 9 GHz. It is compliant with the latest IEEE 802.15.4, IEEE 802.14.4z, and FiRa standards and has been designed to significantly reduce the number of external components and bill of materials (BOM) cost. This SoC is based on the 1T4R architecture that consists of an RF transceiver, a baseband unit, protocol microcontroller (MCU), SRAM, flash, and generic interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
| Encrypted Radio from 1350 to 4990 MHz for Ground or Airborne Applications | |
Software Defined Radio
from Collins Aerospace
|
| The RT-2071(C) Secure CDL ISR SCISR Radio from Collins Aerospace operates from 1350 to 4990 MHz. It provides low-cost and lightweight wideband data link capability that is suitable for a wide range of applications. This radio can be configured as either a ground or airborne terminal and can be matched with a variety of antenna and power amplifiers to meet the requirements of wideband data throughput applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Full-Duplex Data-Link System for Long-Range Aerial Platforms | |
Data Link
from Elbit Systems
|
| The StarLite HR from Elbit Systems is a Data-Link that has been designed for long-range aerial platforms. It is available in S-Band, C-Band, X-Band and Ku-Band frequencies and delivers a data rate of up to 45 Mbps over a range of 300 Km. This system supports full duplex (uplink and downlink) using TDD or FDD and implements advanced CTC-FEC error correction techniques. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1-4 dB Fixed Attenuators with 3.5 mm Connectors from DC to 26.5 GHz | |
Fixed Attenuator
from Pasternack Enterprises Inc
|
| The PE7471-X Series from Pasternack are Fixed Attenuators that operate from DC to 26.5 GHz. They have an in-line, resistive PI attenuator pad design and are available in attenuation values from 1 to 4 dB. These attenuators can handle an input power of up to 2 W and have a VSWR of 1.45:1. They are ideal for reducing the power levels of a signal by a fixed amount with little or no reflections in amplifiers, receivers and detectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Transceiver Module from 71 to 86 GHz for Wireless Backhaul Applications | |
RF Transceiver
from Filtronic
|
| The Morpheus X2 from Filtronic is an E-band Transceiver Module that operates from 71 to 76 (Tx) GHz and 81 to 86 GHz (Rx). This turn-key solution for carrier-grade mobile XHaul applications is based on Filtronic’s proven Morpheus II platform and supports channel links up to 10 Gbps. Each module contains all the transmit and receive functions necessary for the RF section of an E-Band link and provides a simple connection to a high data rate full duplex modem. |
| |
Download Datasheet
Product Details | |
|
|
|
| 28 GHz, Integrated 8x8 Phased Array Antenna Module | |
Electronically Steerable Antenna
from Fujikura
|
| The FutureAccess Type-C from Fujikura is a Phased Array Antenna Module (PAAM) that operates from 24.25 to 27.50 GHz and 26.50 to 29.50 GHz. It consists of beamformer ICs, a frequency conversion IC, bandpass filters, EEPROM, and an array antenna in one module, offering optimal total cost of ownership (TCO) and reduced development time. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Multi-Band, Multi-Constellation GNSS Front-end Module | |
Front End Module
from Taoglas
|
| The TFM.120A from Taoglas is a GNSS Front-end Module for L1+B1+G1, L2 and L5+L-bands from 1197 to 1606 MHz. It is a dual-input, single-output module and has a SAW/LNA/SAW/LNA topology in both the low and high-band signal paths to prevent unwanted out-of-band interference from overdriving the GNSS LNAs or receiver. |
| |
Download Datasheet
Product Details | |
|
