| Featured Products this Week . |
|
|
| Rectangular WR90 Waveguide Hybrid Coupler from 1 to 110 GHz | |
Waveguide Coupler
from Scientific Microwave Corporation
|
| The SMC-196090 from Scientific Microwave Corporation is a Rectangular Waveguide Hybrid Coupler that operates from 1 to 110 GHz. It is available in coupling values from 3 to 20 dB, provides an isolation of 23 dB, and has a bandwidth of 20%. This coupler has a phase imbalance of ±5° and a coupling sensitivity of ±0.25 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 dB Directional Coupler from 0.5 to 18 GHz | |
Directional Coupler
from Pulsar Microwave
|
| The CS30-23-436/20 from Pulsar Microwave Corporation is a Directional Coupler that operates from 0.5 to 18 GHz. This 30 dB coupler has a directivity of more than 15 dB and an insertion loss of less than 0.9 dB. It can handle an input/reflected power of up to 25 W and has a VSWR of less than 1.5:1. The coupler is available in a module that measures 4.4 x 0.7 x 0.4 inches and has SMA connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 dB Directional Couplers from 698 to 2690 MHz | |
Directional Coupler
from Fiplex Communications
|
| The BDA-DCxx-W2 Series from Honeywell are Directional Couplers that operate from 698 to 2690 MHz. They provide coupling from 6 to 30 dB with an isolation of more than 26 dB and have an insertion loss of less than 1.75 dB. These couplers can handle an average input power of up to 300 W and have a VSWR of less than 1.25:1. They are available in a module that measures 164.2 x 65.6 x 23.5 mm with N-Type (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2-Way MLDD Power Divider from 26.5 to 40 GHz | |
Power Divider
from KRYTAR
|
| The 6265400 from KRYTAR is a 2-Way Power Divider that operates from 26.5 to 40 GHz. It can handle up to 10 W of input power, provides more than 14.5 dB of isolation, and has an insertion loss of less than 1.9 dB. This power divider uses an MLDD (matched-line directional dividers) proprietary design to provide ultra-high performance over a broadband frequency range. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Performance Signal Analyzer from 2 Hz to 50 GHz | |
RF Spectrum Analyzer
from Keysight Technologies
|
| The N9032B from Keysight is a Signal Analyzer that is part of the high-performance PXA family. It operates from 2 Hz to 50 GHz with a maximum analysis bandwidth of 2 GHz, a DANL of -174 dBm, and a phase noise of -136 dBc/Hz @10 kHz offset (1 GHz freq.). This analyzer is built to address high-bandwidth applications like 5G carrier aggregation and amplifier test, 802.11ax/be, satellite, radar, and electronic warfare (EW) applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| D-Band External Frequency Extension Frontend from 110 to 170 GHz | |
Signal Generator Extender
from Rohde & Schwarz
|
| The R&S FE170ST from Rohde & Schwarz is an External Frequency Extension Frontend with output frequency in the D-Band from 110 to 170 GHz. It can extend the frequency range of various test and measurement products such as the R&S FSW signal and spectrum analyzer, R&S RTP oscilloscope, R&S SMW200A, and R&S SMM100A vector signal generators for wideband signal generation and analysis. |
| |
Download Datasheet
Product Details | |
|
|
|
| Man-Portable Interference Hunting and RF Monitoring Receiver from 9 kHz to 18 GHz | |
RF Monitoring Receiver
from CRFS
|
| The RFeye StormCase from CRFS is a man-portable integrated system designed for easy mobile spectrum monitoring from a fully autonomous and ruggedized stand-alone unit that operates from 9 kHz to 18 GHz. It incorporates an RFeye Node 100-8 or 100-18, internal and external antenna ports, high-performance hot-swappable rechargeable MIL-SPEC battery and integrated 512 GB SSD memory for high-volume data collection during mobile field operations. |
| |
Download Datasheet
Product Details | |
|
|
|
| Conical Inductors from 10 MHz to 40 GHz with “Flying Leads” | |
RF Inductor
from Coilcraft
|
| The BCL Series from Coilcraft are Conical Inductors that operate from 10 MHz to 40 GHz. They are available with inductance values from 0.22 to 8.0 µH and have a DC resistance from 0.10 to 3.39 Ohm. The inductors can limit effects caused by stray capacitances and can operate as a series of narrow band inductors. They are available with tin-silver-copper (96.5/3/0.5) over copper terminations and have “flying leads” that allow precise positioning and adjustment of the mounting angle. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 30 W Solid-State Power Amplifier from 18 to 40 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2145B-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 40 GHz. It delivers a CW/pulsed output power of 30 W with a power gain of more than 44 dB and a gain adjustment range of 20 dB. This amplifier has a Class A/AB linear design with a 2-tone intermodulation (IMD) of -30 dBc, harmonics of less than -20 dBc, and spurious emission of better than -60 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 GHz Multi-Coax Solution for Coaxial-to-PCB Transitions | |
RF Cable Assembly
from HUBER+SUHNER
|
| The MXP50 Series from Huber+Suhner are multi-coax cable assemblies for coaxial-to-PCB Transitions up to 50 GHz. These assemblies are available in 1x8 and 2x8 Configurations with highly flexible and stable cables. They have standard phase matching of +/- 2 ps and are available with MXP to 2.4 mm and MXP to MXP connection interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
| Reflective SPDT Switch MMIC from DC to 12 GHz | |
RF Switch
from SuperApex Corporation
|
| The SAC3203AQ3 from SAC Superapex is an SPDT Switch MMIC that operates from DC to 12 GHz. It has a switching speed of 30 ns and provides an isolation of 48 dB. This reflective switch can handle an input power of up to 30 dBm and has an insertion loss of less than 1.4 dB. It operates using complementary positive control voltage logic lines of 0/+5V. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP67-Rated ¼-inch Flexible Quick Jumper Assembly for Multiple Ports | |
RF Cable Assembly
from Radio Frequency Systems
|
| The CELLFLEX® from Radio Frequency Systems is an MQX (Multiple Ports Quick Connector) Jumper Assembly. It features highly flexible ¼-inch multiple-stranded coaxial cables with a bend radius of 25 mm and has a black polyethylene jacket (fire retardant option also available). This jumper has a VSWR of less than 1.35:1 and a 3rd-order intermodulation of better than -155 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| Radiation Tolerant 20 GHz SPDT Absorptive Switch for Space Applications | |
RF Switch
from Teledyne e2v HiRel Electronics
|
| The TDSW020A2T from Teledyne Defense Electronics is an Absorptive SPDT Switch that operates from DC to 20 GHz. It can handle an input power of up to 35 dBm, provides an isolation of more than 40 dB and has an insertion loss of less than 3 dB. This switch is fabricated on robust 0.15 µm InGaAs pHEMT technology. It is controlled using TTL-compatible voltage levels and requires DC supplies of +5V/-5V. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3GPP Rel-17 Compliant, M.2 Form-Factor 5G RedCap Modules | |
Cellular Module
from Fibocom
|
| The FM330 Series from Fibocom are 5G RedCap Modules compliant with the 3GPP Rel-17 standards. They are based on MediaTek’s T300 5G modem, which utilizes a 6 nm radio frequency system-on-chip (RFSOC) single-die solution. These modules support global mainstream 5G frequency bands with channel bandwidths of up to 20 MHz and deliver a peak data rate of up to 227 Mbps (downlink) and 122 Mbps (uplink). |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive Grade Long-Range Bluetooth 5.3 LE Modules | |
RF Module
from u-blox AG
|
| The NINA-B50 Series from u-blox are Bluetooth 5.3 LE Modules with support for Thread, Zigbee, and Matter that have been developed for automotive applications. These modules provide a conducted output power of up to 10 dBm and have a maximum range of 1400 m. They are based on the NXP KW45 chipset and comprise of a powerful wireless MCU featuring Bluetooth LE 5.3, advanced security (e.g., NXP EdgeLock®, Arm® TrustZone®), and FlexCAN, CAN, CAN FD, and LIN bus interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Performance Microwave Frequency Synthesizer from 800 MHz to 12.8 GHz | |
Frequency Synthesizer
from Analog Devices
|
| The ADF4368 from Analog Devices is a Microwave Frequency Synthesizer that can generate frequencies from 800 MHz to 12.8 GHz. This ultra-low jitter synthesizer is based on integer-N and fractional-N phase-locked loops (PLL) that integrate a voltage-controlled oscillator (VCO) to support frequency conversion applications. It does not require an internal doubler to generate the desired output frequency which eliminates the need for sub-harmonic filters. |
| |
Download Datasheet
Product Details | |
|
|
|
| Flame-Retardant Glass Reinforced Hydrocarbon Laminates | |
Laminate
from Rogers Corporation
|
| The Anteo™ from Rogers Corporation are Laminates that are based on glass reinforced hydrocarbon thermoset platform. They are designed with a dielectric constant (Dk) to match that of FR-4 and offer a more cost-effective solution while retaining the tight Dk and thickness tolerances required to cater to wireless market. |
| |
Download Datasheet
Product Details | |
|
|
|
| Double-Balanced Mixer from 18 to 41 GHz | |
RF Mixer
from DS Instruments
|
| The MX40000PRO from DS Instruments is a Double-Balanced Mixer with an RF frequency from 18 to 41 GHz and an IF frequency from 10 MHz to 18 GHz. It has an integrated programmable LO generator from 25 to 40 GHz. This double-balanced mixer has a conversion loss of 12 dB, provides a LO-RF isolation of 35 dB, and a LO-IF isolation of 30 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W, WPC Qi 1.3.x-Compliant Wireless Charging Transmitter IC | |
Wireless Charging Transmitter
from Infineon Technologies
|
| The WLC1150-68LQXQT from Infineon Technologies is a Wireless Charging Transmitter IC that is compatible with the WPC Qi 1.3.x specifications. It uses Infineon’s high-power proprietary protocol mode to deliver an output power of up to 50 W and supports robust ASK/FSK communication. This transmitter IC consists of a built-in microcontroller with integrated ARM Cortex-M0 Core 128 KB flash, 16 KB SRAM, and 32 KB ROM. |
| |
Download Datasheet
Product Details | |
|
