| New RF and Microwave Products this Week . |
|
|
|
|
|
|
|
| Rad-tolerant S-Band Low Noise Amplifier from 2 to 5 GHz | |
RF Amplifier
from Teledyne e2v HiRel Electronics
|
| The TDLNA2050SEP from Teledyne e2v Hirel is a Low Noise Amplifier that operates from 2 to 5 GHz. It is ideal for use in demanding high reliability, space, and radar applications where low noise figures, minimal power consumption, and a small package footprint are required. The LNA provides a gain of up to 22 dB with a noise figure of less than 1.5 dB and provides an output power of 36 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space-Qualified Integrated Transmitter Module from 26.7 to 26.9 GHz | |
RF Transmitter
from ERAVANT
|
| The SSK-ST2730253027-28-C1 from ERAVANT is a Space-Qualified Transmitter Module with a frequency range from 26.7 to 26.9 GHz. It is designed and manufactured for small satellite applications and incorporates a phase-locked oscillator to convert 1.0 GHz signals to 26.8 GHz signals. This module has an integrated circular-polarized, lens-corrected antenna with a 3 dB beamwidth of 10°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4x4 Butler Matrix from 2.4 to 8 GHz for Multi-Channel MIMO Testing | |
Butler Matrix
from Ranatec
|
| The RI 3041 from Ranatec is a 4x4 Butler Matrix that operates from 2.4 to 8 GHz. It can be used to control a beamforming network by switching the direction of beams to the desired beam port. In transmit mode, it delivers the full power of the transmitter to the beam, and in receive mode, it collects the signal from each of the beam directions with the full gain of the antenna array. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Power Divider from 0.5 to 26.5 GHz | |
Power Divider
from Werbel Microwave
|
| The WM2PD-0.5-26-S from Werbel Microwave is a 2-way Power Divider that operates from 0.5 to 26.5 GHz. It can handle a CW input power of up to 10 W, provides an isolation of more than 14 dB, and has an insertion loss of less than 2.3 dB. This power divider has an amplitude balance of ±0.24 dB and a phase balance of ±6°. It exhibits an excellent VSWR performance over an operating temperature range from -55°C to +85°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G Ready Millimeter-wave Directional Coupler from 6 to 40 GHz | |
Directional Coupler
from MECA
|
| The 765-10-23.000 from Meca is a 5G ready millimeter-wave directional coupler that operates from 6 to 40 GHz. Available in 10 dB coupling, It provides an insertion loss of 1.3 dB and directivity of more than 12 dB. The coupler can handle an average input power of up to 20 W and a peak power of up to 1 KW. It is available in a module with 2.92 mm female connectors. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by SV Microwave | | D38999 Pin and Socket Contacts | | SV Microwave offers D38999 pin and socket contacts that are aligned to the latest SOSA™ specification. These coaxial contacts fit standard and series III housing and are offered in BMB size 8 and SMPM size 12. Ideal in an embedded system that transitions from the chassis to an out-of-the-box application. Click here to learn more. | | | |
|
|
| 32T32R Backhaul Radio from 3.55 to 3.7 GHz for 5G Applications | |
Microwave Backhaul Radio Links
from AGTGSS
|
| The 32TR mMIMO from AmpliTech Group True G Speed Services (AGTGSS) is a Backhaul Radio for the 5G-NR n78 band from 3.55 to 3.7 GHz. It has a bandwidth of 100 MHz and supports QPSK and QAM (16, 64, 256) modulation schemes. This radio can be networked to other devices using TDD duplex mode and integrates 32 transmit and receive antenna elements in a panel. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Over Fiber 5G - DAS Extension System from 0.5 to 6000 MHz | |
RF Over Fiber Module
from RFOptic
|
| The RFoF-6GHz from RFOptic is an RF Over Fiber 5G - DAS extension system that operates from 0.5 to 6000 MHz. It has been developed to overcome the loss caused by coaxial infrastructure in terms of EVM and ACLR over a wide range of signal levels over long distances. The 5G system consists of an outdoor enclosure which is situated on the roof close to the antenna and an indoor unit connected by optical fibers. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W Solid State Low Noise Power Amplifier from 41 to 47 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The MPA3021 from Exodus Advanced Communications is a GaAs FET Hybrid Solid State Low Noise Power Amplifier that operates from 41 to 47 GHz. This class AB linear amplifier delivers over 2 W of saturated output power (P1dB of 1 W) with a gain of more than 33 dB. It has spurious of up to -60 dBc, and harmonics of up to -20 dBc. The amplifier has built-in protection circuits and requires external heat sink for cooling. |
| |
Download Datasheet
Product Details | |
|
|
|
| Double-Ridge WRD200 Waveguide Pressure Window from 2 to 4.8 GHz | |
Waveguide Pressure Window
from Scientific Microwave Corporation
|
| The SMC-061D200 from Scientific Microwave Corporation is a Double-Ridge Waveguide Pressure Window (Kapton) that operates from 2 to 4.8 GHz. It has a pressure rating of 30 psi and uses a Kapton film seal. This pressure window can improve the power handling of waveguide systems by maintaining high pressure inside a chain of cascaded components. |
| |
Download Datasheet
Product Details | |
|
|
|
| Phase-Stable and Flexible Cable Assemblies from DC to 50 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The StabilityFlex™ from Maury Microwaves are Phase-Stable Cable Assemblies that operate from DC to 50 GHz. They are available in 24", 36", 48", and 60" lengths (custom lengths available) with N-type, SMA, 2.92mm and 2.4mm connectors. These ultra-flexible cable assemblies have a phase stability vs flexure of ±4°, amplitude stability vs flexure of ±0.05 dB, and provide shielding of more than 100 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Double-ridged Horn Antenna from 10 to 67 GHz | |
Horn Antenna
from RF SPIN
|
| The DRH1067 from RFSpin is a Double-ridged Horn Antenna that operates from 10 to 67 GHz. This linearly polarized antenna provides a gain of 23 dB and has an antenna factor of 36 to 43 dB/m and a VSWR of less than 1.8:1. It is available in a housing that measures 158 x 59 x 43 mm with a 1.85 mm (female) coaxial connector. The antenna has a corrosion-resistant coating and includes a standard adapter with ¼ inch inner thread mounting. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by SV Microwave | | |
|
|
| High Q Square Air Core Inductors Series | |
RF Inductor
from Coilcraft
|
| The 111SQ from Coilcraft is a Square Air Core Inductors series with exceptionally high quality factors up to 200 at 400 MHz. They are available in inductance values from 27 to 47 uH and have an SRF of between 2.2 and 2.6 GHz. The inductors have solder-coated leads to ensure excellent solderability and have a flat top and bottom for easy placement via pick and place machines. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1.25 W Power Amplifier from 2 to 20 GHz | |
RF Amplifier
from Narda-MITEQ
|
| The MPAS-40-02002000-45-30P from Narda-MITEQ is a Power Amplifier that operates from 2 to 20 GHz. It provides a gain of 44 dB with an output P1dB of 31 dBm. This power amplifier has an ON/OFF switch with a switching time of less than 200 µs and a rise/fall time of less than 100 µs. It features reverse polarity protection, over-temperature alarm/protection, and over/under-current alarm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier Die from DC to 20 GHz for Military/Space Applications | |
RF Amplifier
from mmTron Inc
|
| The TMC162 from mmTron is a Distributed Low Noise Amplifier that operates from DC to 20 GHz. It provides a linear gain of 19 dB with a noise figure of 2.5 dB and has a P1dB of 24 dBm. This LNA is based on GaAs pHEMT technology and is suitable for use in radio communications, instrumentation, OC192 LN/MZ modulator driver, military, and space applications. It requires a DC supply of 8 V and consumes 160 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Fixed Attenuators from DC to 50 GHz for High-Intensity RF Applications | |
Fixed Attenuator
from Fairview Microwave
|
| The FMAT7510-X Series from Fairview Microwave are Fixed Attenuators that operate from DC to 50 GHz. They are available in attenuation values of 1, 2, 3, 6, 10, 20 or 30 dB. These attenuators can handle an input RF input power of up to 5 W and have a VSWR of less than 1.45:1. They have a stainless-steel housing that measure 8.00 (Dia.) x 29.01 (H) mm with 2.4 mm (male/female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact Ultra-Wideband (UWB) Antennas for Wearable Applications | |
Antenna
from AntennaWare
|
| The BodyWave™ from AntennaWare are Ultra-Wideband (UWB) Antennas that operate in the 1.9 GHz, 2.4 GHz, 6.5 GHz (UWB channel 5) and 8 GHz (UWB channel 9) bands. They are designed for use in wearable applications and utilize the unique BodyWave™ propagation, which enables wireless communications when there is no direct line of sight with on-body and off-body receivers. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Front-End Module from Zigbee/Thread/Bluetooth Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY66409-11 from Skyworks is a 2.4 GHz Front-End Module for Zigbee®/Thread/Bluetooth® applications. It has an integrated Power Amplifier that delivers an output power of up to +15 dBm, an LNA with a noise figure of 2.5 dB, and a low-loss bypass path. This module has a single-ended transmit/receive interface and a switch ON/OFF time of less than 800 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 3GPP Rel-17 5G RedCap Module with LTE Cat 4 Fallback | |
Cellular Module
from Telit Communications
|
| The FE910C04 from Telit Cinterion is a 5G RedCap Module that is based on the 3GPP Release 17 RedCap technology. It also supports LTE Cat 4 fallback to enhance uplink performance and coverage. This module is powered by Telit Cinterion’s value-added services, encompassing NExT data plans, connectivity activation, AppZone processing, and OneEdge services. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| LTE Cat 4 Module with MIMO Support and 2G/3G Fallback | |
Cellular Module
from MeiG Smart Technology
|
| The SLM770A from MeiG Smart is an LTE Cat 4 Module designed to ensure compatibility with the existing 2G and 3G network infrastructure. This module covers LTE-FDD/TDD, WCDMA, EDGE GPRS, and GSM networks to support multiple users with different use cases and can provide network communication even in remote areas. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Full-Duplex Data-Link System for Long-Range Aerial Platforms | |
Data Link
from Elbit Systems
|
| The StarLite HR from Elbit Systems is a Data-Link that has been designed for long-range aerial platforms. It is available in S-Band, C-Band, X-Band and Ku-Band frequencies and delivers a data rate of up to 45 Mbps over a range of 300 Km. This system supports full duplex (uplink and downlink) using TDD or FDD and implements advanced CTC-FEC error correction techniques. |
| |
Download Datasheet
Product Details | |
|
|
|
| Omnidirectional Flexible Planar Dipole Antenna from 863 to 928 MHz | |
Antenna
from Laird Connectivity
|
| The FlexDIPOLE from Laird Connectivity is a Flexible Planar Dipole Antenna that operates from 863 to 870 MHz and 902 to 928 MHz. This linear polarized antenna has an omnidirectional radiation pattern with a peak gain of 2.4 dBi and a VSWR of less than 3.0:1. It has an innovative design for mounting featuring adhesive backing, allowing for easy and flexible installation in a variety of enclosures and end product designs. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
