| New Aerospace & Defense Products . |
|
|
| 20 W S-Band Power Amplifier from 2 to 4 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-HPA-0200-0400-43 from ERZIA is a Power Amplifier that operates from 2 to 4 GHz. It delivers a saturated output power of 20 W (~43 dBm) with a small signal gain of 43 dB and a gain flatness of ±1 dB. This amplifier has an ON/OFF time of 150/350 ns and a VSWR of less than 1.8:1. It requires a DC supply of 28 V and consumes 105 W of power. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W GaAs pHEMT Power Amplifier from DC to 28 GHz | |
RF Amplifier
from Analog Devices
|
| The ADPA9007 from Analog Devices is a GaAs Power Amplifier that operates from DC to 28 GHz. It delivers a saturated output power of 2 W with a gain of 12.5 dB. This amplifier is fabricated on a GaAs pHEMT process with RF input and outputs internally matched and DC-coupled. It includes a temperature-compensated RF power detector and a temperature sensor. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ultra Low Noise Amplifier from 0.4 - 3.0 GHz for Space and Military Applications | |
RF Amplifier
from Teledyne e2v HiRel Electronics
|
| The TDLNA0430SEP from Teledyne e2v HiRel is a rad-tolerant UHF to S-band low noise amplifier that operates from 0.4 to 3 GHz. This high linearity amplifier has been developed for harsh environments where it can be used as a first-stage LNA for advanced satellite or military communication receivers or radar systems. It provides 21.5 dB of gain with a noise figure of 0.35 dB and has a P1dB of 18.5 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.25 W Power Amplifier from 2 to 20 GHz | |
RF Amplifier
from Narda-MITEQ
|
| The MPAS-40-02002000-45-30P from Narda-MITEQ is a Power Amplifier that operates from 2 to 20 GHz. It provides a gain of 44 dB with an output P1dB of 31 dBm. This power amplifier has an ON/OFF switch with a switching time of less than 200 µs and a rise/fall time of less than 100 µs. It features reverse polarity protection, over-temperature alarm/protection, and over/under-current alarm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 500 W IFF Transponder for SWaP-C Constrained Military Applications | |
Radar Transponder
from BAE Systems
|
| The AN/DPX-7 from BAE Systems is an Identification Friend or Foe (IFF) Transponder that is designed to identify and track aircraft, ships, and other ground forces. It incorporates an ADS-B passive-receive capability to support situational awareness and sense-and-avoid applications. This transponder provides Mode 5, Mode S, and ADS-B functionality in a reduced-size unit at a lower cost than current military transponders, making it suitable for size, weight, and power (SWaP) constraint applications. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Quantic PMI (Planar Monolithics) | | |
|
|
| Encrypted Radio from 1350 to 4990 MHz for Ground or Airborne Applications | |
Software Defined Radio
from Collins Aerospace
|
| The RT-2071(C) Secure CDL ISR SCISR Radio from Collins Aerospace operates from 1350 to 4990 MHz. It provides low-cost and lightweight wideband data link capability that is suitable for a wide range of applications. This radio can be configured as either a ground or airborne terminal and can be matched with a variety of antenna and power amplifiers to meet the requirements of wideband data throughput applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Full-Duplex Data-Link System for Long-Range Aerial Platforms | |
Data Link
from Elbit Systems
|
| The StarLite HR from Elbit Systems is a Data-Link that has been designed for long-range aerial platforms. It is available in S-Band, C-Band, X-Band and Ku-Band frequencies and delivers a data rate of up to 45 Mbps over a range of 300 Km. This system supports full duplex (uplink and downlink) using TDD or FDD and implements advanced CTC-FEC error correction techniques. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 3U OpenVPX Multi-Channel Programmable Digital Transceiver | |
RF Transceiver
from Mercury Systems
|
| The EnsembleSeries™ DCM3220 from Mercury Systems is a Multi-Channel Programmable Digital Transceiver optimized for SWaP-constrained environments. It consists of FPGA processing (Virtex Ultrascale VU7P FPGA, Zynq Ultrascale ZU11EG MPSoC, and 7488 DSP slices), VITA 65 backplane, 12-bit ADC and DAC, VITA 67 configurable rear I/O, security engine, and an AS9100D-qualified IPMI controller. |
| |
Download Datasheet
Product Details | |
|
|
|
| L1/L2-Band Military-Grade GPS-Disciplined Rubidium Clock | |
Rubidium Oscillator
from AccuBeat
|
| The AR51-07 from AccuBeat is a GPS-Disciplined Rubidium Clock that operates in the L1 and L2 GPS bands. It can be phase-locked to the GPS signal or other external inputs with a timing accuracy of ±20 ns (RMS) and a frequency accuracy of ±2 x 10-12. This clock generates outputs that are derived from the Rubidium-Atomic-Standard to maintain accurate time and frequency even when GPS reception is interrupted. |
| |
Download Datasheet
Product Details | |
|
|
|
| GPS Anti-Jam Antenna System for Airborne Applications | |
GNSS Anti-Jamming Solution
from NovAtel
|
| The GAJT-AE-N from Novatel is a GPS Anti-Jam Antenna System for the GPS (L1/L2), QZSS (L1/L2), SBAS (L1), and Galileo (E1) bands. It has been designed for size and weight-constrained applications such as small airborne and ground unmanned platforms, where it is preferable to mount the antenna electronics inside the vehicle. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| X-Band Electronically Tunable Filter from 8 to 10 GHz | |
Tunable Filter
from Nanowave Technologies
|
| The NWETF8010-10 from Nanowave Technologies is an X-Band Electronically Tunable Filter with center frequencies from 8 to 10 GHz. It allows the center frequency to be adjusted electronically and has an adjustable 3 dB bandwidth from 10 to 100 MHz. Both the bandwidth and frequency of the filter can be electronically controlled in frequency steps of less than 1 MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2-Way MLDD Power Divider from 4 to 40 GHz | |
Power Divider
from KRYTAR
|
| The 6040400 from KRYTAR is a 2-Way Power Divider that operates from 4 to 40 GHz. It can handle an input power of 10 W, provides an isolation of more than 14 dB, and has an insertion loss of less than 2.1 dB. This power divider uses an MLDD (matched-line directional dividers) proprietary design to provide ultra-high performance over a broad frequency range. |
| |
Download Datasheet
Product Details | |
|
