| Featured Products this Week . |
|
|
|
|
|
|
|
| 4 kW Pulsed Solid-State Power Amplifier from 1 to 2 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2043P-4KW from Exodus Advanced Communications is a Solid-State Pulsed Power Amplifier that operates from 1 to 2 GHz. It delivers a saturated pulsed output power of more than 4 kW with a gain of over 66 dB. The amplifier has a pulse width of up to 100 usec, 6% duty cycle and rise/fall time of less than 50 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| Double-Ridge WRD200 Waveguide Pressure Window from 2 to 4.8 GHz | |
Waveguide Pressure Window
from Scientific Microwave Corporation
|
| The SMC-061D200 from Scientific Microwave Corporation is a Double-Ridge Waveguide Pressure Window (Kapton) that operates from 2 to 4.8 GHz. It has a pressure rating of 30 psi and uses a Kapton film seal. This pressure window can improve the power handling of waveguide systems by maintaining high pressure inside a chain of cascaded components. |
| |
Download Datasheet
Product Details | |
|
|
|
| mm-Wave Directional Coupler from 6 to 40 GHz | |
Directional Coupler
from MECA
|
| The 765-20-23.000 from MECA is a 5G-ready mm-wave Directional Coupler that operates from 6 to 40 GHz (Covering the C to V Band). It has a coupling value of 20 dB and can handle up to 20 watts of average power. The coupler has an insertion loss of less than 1.3 dB and directivity of more than 12 dB. It is available in a module with 2.92mm (F) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 16-Port Vector Network Analyzer from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SN5090-16 from Copper Mountain Technologies is a 16-Port Vector Network Analyzer that operates from 300 kHz to 9 GHz. This VNA is an organic extension of the Compact VNA solutions offered by CMT. It enables the full complexity of VNA measurements, a streamlined calibration process, and reduced test times. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by IEEE WAMICON 2024 | | |
|
|
|
|
|
|
|
| 3 W Low Leakage RF Limiter from 2 to 18 GHz | |
Limiter
from Quantic PMI (Planar Monolithics)
|
| The LM-2G18G-RAD-3W-19DBM-SMF from Quantic PMI is an RF Limiter that operates from 2 to 18 GHz. It can handle an average input power of 3 W, a peak input power of 1 kW, and a leakage power of 80 mW. This limiter has an insertion loss of less than 2.5 dB and a maximum VSWR of 2.0:1. It is available in a module that measures 1.314 (L) x 0.188 (radius) inches with 2.92 (male/female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| OCXO from 10 to 120 MHz for Timing Applications | |
OCXO
from Dynamic Engineers
|
| The OCXO2021AX from Dynamic Engineers is an Oven-Controlled Crystal Oscillator (OCXO) with a frequency range from 10 to 120 MHz. It provides a sinewave or CMOS/TTL output waveform with frequency stability (vs temperature) of ±100 ppb and an SSB phase noise of -155 dBc/Hz (at 10 kHz offset, 10 MHz frequency). This OCXO has a spurious emission of -70 dBc and harmonics of -30 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Bluetooth 5.3 Wireless Radio Module with Antenna | |
RF Module
from Fujitsu
|
| The FWM7BLZ23-109172 from Fujitsu is a 2.4 GHz Bluetooth 5.3 (low energy single mode) Wireless Radio Module with an integrated antenna. It is based on the nRF52840 SoC (from Nordic Semiconductor), and has 256 KB of RAM and a flash memory of 1 MB. The increased memory and flash memory give designers the option to leverage the Matter royalty-free home automation connectivity standard as well as the Thread IP-based networking protocol. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Front-End Module for WLAN and Bluetooth Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY85300-21 from Skyworks Solutions is a 2.4 GHz Front-End Module for WLAN and Bluetooth applications. It has a fully matched power amplifier (PA), power detector, harmonic filter, low-noise amplifier (LNA), and single-pole, triple-throw (SP3T) switch. This FEM also has a transmitter positive slope power detector with 20 dB of dynamic range, and a digital enable control for transmitter power ramp on/off control. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5.9 GHz C-V2X Chipset for the Automotive Sector | |
V2X Module
from Qualcomm
|
| The Qualcomm® 9150 C-V2X ASIC is a C-V2X (cellular vehicle-to-everything) SoC that is compatible with 5G and complements other Advanced Driver Assistance Systems (ADAS) sensors. It has been designed to operate in the 5.9 GHz ITS spectrum. It includes C-V2X direct communication mode, which offers vehicles and roadside equipment low latency communications for Vehicle-to-Infrastructure (V2I), Vehicle-to-Vehicle (V2V) and Vehicle-to-Pedestrian (V2P) driving with or without the involvement of a cellular network. |
| |
Download Datasheet
Product Details | |
|
|
|
| Block Up/Down Converter from 24 to 29.5 GHz | |
RF Up-down Converter
from Analog Devices
|
| The ADMV1017 from Analog Devices is a Silicon Germanium (SiGe) based Microwave Block Up/Down Converter with an RF Frequency range from 24 to 29.5 GHz. The up-converter offers two modes of frequency translation which include a direct conversion to RF from differential baseband (I/Q) input signals and single-sideband (SSB) up-conversion from complex intermediate frequency (IF) inputs. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space-Qualified Integrated Transmitter Module from 26.7 to 26.9 GHz | |
RF Transmitter
from ERAVANT
|
| The SSK-ST2730253027-28-C1 from ERAVANT is a Space-Qualified Transmitter Module with a frequency range from 26.7 to 26.9 GHz. It is designed and manufactured for small satellite applications and incorporates a phase-locked oscillator to convert 1.0 GHz signals to 26.8 GHz signals. This module has an integrated circular-polarized, lens-corrected antenna with a 3 dB beamwidth of 10°. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface-Mount Low Noise Amplifier MMIC from DC to 7 GHz | |
RF Amplifier
from Mini Circuits
|
| The PSA2-6+ from Mini-Circuits is a Low Noise Amplifier (LNA) that operates from DC to 7 GHz. It provides a gain of up to 22.2 dB with a noise figure of less than 3.2 dB and has a P1dB of 5.6 dBm. This amplifier is fabricated using GaAs HBT technology and is ideal for use in 5G MIMO, radar systems, broadband test and measurement equipment. It requires a DC supply of 5 V and consumes 15 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Broadband GaAs IQ Mixer MMIC from 2 to 18 GHz | |
RF Mixer
from Marki Microwave
|
| The MMIQA-0218HPSM from Marki Microwave is a GaAs IQ Mixer MMIC that operates from 2 to 18 GHz (RF/LO response) and DC to 3 GHz (IF response). It has an integrated broadband LO driver amplifier that can operate with LO powers as low as +0 dBm while retaining exceptional conversion loss and linearity. This mixer has a conversion loss of less than 11 dB and a noise figure of under 10.5 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 10 W RF Circulator from 17.3 to 22 GHz for Military Applications | |
RF & Microwave Circulator
from DiTom Microwave
|
| The DHC1722 from DiTom Microwave is an RF Circulator that operates from 17.3 to 22 GHz. It can handle an average input power of up to 10 W and a peak input power of 30 W. This isolator provides more than 20 dB of isolation and has an insertion loss of less than 0.5 dB. It is available in a passivated stainless-steel module that measures 0.5 x 0.7 x 0.5 inches with SMA (male/female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 63 dB Solid-State Programmable Attenuator from 0.1 to 18 GHz | |
RF Variable Attenuator
from JFW Industries
|
| The 50P-2103 from JFW Industries is a Solid-State Programmable Attenuator that operates from 0.1 to 18 GHz. This USB-controlled attenuator has seven individually controlled attenuation steps: 0.5, 1, 2, 4, 8, 16 and 32 dB to cover a total attenuation range of 0 to 63 dB. The attenuator operates bi-directionally and can handle up to 24 dBm of power at the input port and 15 dBm of power at the output port. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged, Omnidirectional Monitoring Antenna from 20 MHz to 9 GHz | |
Antenna
from Alaris Antennas
|
| The OMNI-A0258 from Alaris Antennas is a Monitoring Antenna that operates from 20 to 1000 MHz (Band A) and 1 to 9 GHz (Band B). This vertically polarized antenna provides a gain of 8 dBi and has a VSWR of less than 2.5.1. It has a beamwidth of 360° (H-plane) and 60° (E-plane). This omnidirectional antenna consists of an antenna array under a single compact radome. |
| |
Download Datasheet
Product Details | |
|
