| New RF and Microwave Products this Week . |
|
|
| Rectangular WR90 Waveguide Hybrid Coupler from 1 to 110 GHz | |
Waveguide Coupler
from Scientific Microwave Corporation
|
| The SMC-196090 from Scientific Microwave Corporation is a Rectangular Waveguide Hybrid Coupler that operates from 1 to 110 GHz. It is available in coupling values from 3 to 20 dB, provides an isolation of 23 dB, and has a bandwidth of 20%. This coupler has a phase imbalance of ±5° and a coupling sensitivity of ±0.25 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Low Noise Rubidium Signal Generator from 9 kHz to 70 GHz | |
Signal Generator
from Anritsu
|
| The MG36271A from Anritsu is an RF/Microwave Signal Generator with a frequency range from 9 kHz to 70 GHz. It has an atomic clock for frequency stability and an optional internal rubidium frequency reference. Rubidium pushes the envelope in phase noise performance with its low and ultra-low phase noise options. It supports AM, FM/PM, and Pulse modulation capabilities, enabling the generation of a wide range of complex analog-modulated signals. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF-over-Fiber Module from 0.1 to 18 GHz for Civil & EW Communication | |
RF Over Fiber Module
from RFOptic
|
| The RFoF-18G-L0-Mini from RFOptic is an RF-over-Fiber Module that operates from 0.1 to 18 GHz. This module has a high spurious free dynamic range making it ideal for handling multiple signals of very different power levels. It has a high SFDR (Spurious Free Dynamic Range) that is particularly useful in antenna testing, radar, or communications system testing due to typical large amplitude ratios between main and side lobes or close and distant targets. |
| |
Download Datasheet
Product Details | |
|
|
|
| Analog Transceivers from 600 MHz to 7.2 GHz for Wi-Fi 7/5G Applications | |
RF Transceiver
from Arctic Semiconductor
|
| The IceWings from Arctic Semiconductor are Multi-standard Analog Transceivers that operate from 600 MHz to 7.2 GHz. They have 4 channels (Tx/Rx) with programmable channel bandwidths from 5 to 400 MHz. These transceivers have integrated low-noise amplifiers (LNA) and pre-amplifiers along with two low-phase-noise fractional synthesizers supporting TDD, FDD, and two 2x2 in TDD. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-constellation L1/L5-Band GNSS Chips with Meter-Level Accuracy | |
GNSS Chipset
from u-blox AG
|
| The UBX-F10 Series from u-Blox are L1/L5 Band GNSS Chips for use in urban environments. They have RF interference and jamming detection/reporting features for signal integrity and advanced filtering algorithms for spoofing detection and reporting. These chips have an odometer that measures the traveled distance with support for different user profiles and provides real-time position accuracy estimates with 95% confidence. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 10 MHz Rubidium Oscillator for Airborne Applications | |
Rubidium Oscillator
from Safran Electronics & Defense
|
| The LPFRS/AV1 from Safran is a high-performance 10 MHz Rubidium Oscillator designed for rugged airborne applications. It has an excellent frequency retrace of ±0.05 ppb and very low temperature sensitivity. The oscillator provides a sine wave output with a phase noise of -140 dBc/Hz @ 10 kHz offset. It has spurious levels of under -80 dBc and harmonics of better than -25 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 398 W GaN Transistor from 1800 to 2200 MHz | |
RF Transistor
from RFHIC
|
| The H014C11A from RFHIC is an RF GaN Transistor that operates from 1800 to 2200 MHz. It delivers a saturated output power of 398 W with a power gain of 13 dB and has a drain efficiency of 49%. This transistor is part of RFHIC’s OptiGaN product family that provides high-performance GaN of SiC tranistors at lower costs. It is available in a surface mount flange package that requires a DC supply of 48 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4.5 W Power Amplifier Module from 20 to 2800 MHz | |
RF Amplifier
from Becker Nachrichtentechnik GmbH
|
| The AMP20280035B from Becker RF is a Power Amplifier that operates from 20 to 2800 MHz. It delivers an output power of 4.5 W with a gain of up to 41 dB and provides a reverse isolation of 70 dB. This amplifier has internal filters and low noise voltage supplies to ensure high spurious suppression and also provides protection against reverse polarity to avoid damages during installation. It is suitable for cellular applications (GSM, UMTS, LTE), Wi-Fi, laboratory and test equipment applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| GaN Solid State Low Noise Amplifier from 50 MHz to 6 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The LNA1009 from Exodus Advanced Communications is a GaN Solid State Low Noise Amplifier that operates from 50 MHz to 6 GHz. It provides a gain of more than 25 dB with a noise figure of 3.5 dB and has a P1dB of over 25 dBm (CW). This high reliability, compact Class AB amplifier requires a 12 V DC supply. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| Surface-Mount Low Noise Amplifier from 1 to 24 GHz | |
RF Amplifier
from ATEK MIDAS
|
| The ATEK161P5 from ATEK MIDAS is a Low Noise Amplifier that operates from 1 to 24 GHz. It provides 15 dB of gain with a noise figure of 2 dB (at 10 GHz) and has a P1dB of 14 dBm. This LNA can be used up to 30 GHz and allows users to easily realize wideband receiver frontends. It requires a DC supply of 5 V and consumes 65 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Wi-Fi 7 Front End Module | |
Front End Module
from Qorvo
|
| The QPF4259 from Qorvo is a 2.4 GHz Wi-Fi 7 Front End Module. It has an integrated 2.4 GHz power amplifier (PA), single pole two throw switch (SP2T) and bypassable low noise amplifier (LNA). The FEM has a coupler with RF output as well as a broad range, constant slope voltage RF / DC logarithmic power detector for application feedback. It has integrated die-level filtering for 2nd and 3rd harmonics as well as 5 GHz rejection for DBDC operation. This FEM is ideal for Wi-Fi 7 (802.11be) systems, access points, wireless routers, residential gateways, customer premise equipment and Internet of Things applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4 W RF Power Amplifier from 3.3 to 3.6 GHz | |
RF Amplifier
from iCana
|
| The ARQSP3336-4 from iCANA is an RF Power Amplifier that operates from 3.3 to 3.6 GHz. It delivers a saturated output power of up to 35.4 dBm (~3.46 W) with a power gain of more than 35 dB and a PAE of 25%. The amplifier requires a DC supply of 5 V and is available in a Surface Mount LGA 16-pin package that measures 5 x 5 x 1.1 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Small RF Shield Box for Mobile Phone Testing | |
RF Shielded Test Enclosure
from LabiFix Innovations
|
| The LBX500 from Labifix is a Small RF Shielded Test Enclosure for Cellular, Bluetooth, ZigBee, WiMAX and other smaller wireless devices. It has high-performance RF absorber lining and provides shielding effectiveness of more than 80 dB (at 6 GHz). This test enclosure has a rugged welded construction with an interior dimension of 4.0 x 6.0 x 9.0 inches. |
| |
Download Datasheet
Product Details | |
|
|
|
| PIN-Diode SPDT Switch from 20 to 44 GHz for 5G Applications | |
RF Switch
from MACOM
|
| The MAMF-011183 from MACOM is a PIN Diode SPDT Switch that operates from 20 to 44 GHz. This switch can handle a CW input power of 41.2 dBm, has an insertion loss of less than 1.7 dB and provides more than 32 dB of isolation. It has a switching speed of 36 ns, a rise time of 4 ns, and a fall time of 13 ns. This 50-ohm terminated switch utilizes MACOM’s proven AlGaAs PIN diode technology for broadband performance with low loss. It is ideal for 5G, point-to-point, radar, radiometers, test and instrumentation, and other high-frequency applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Absorptive SP4T Switch from 0.1 to 18 GHz | |
RF Switch
from Quantic PMI (Planar Monolithics)
|
| The P4T-100M18G-80-T-515-SFF-4W-IND from Quantic PMI is an Absorptive SP4T Switch that operates from 0.1 to 18 GHz. It has a switching speed of less than 200 ns and has an insertion loss of 4.5 dB. This switch can handle an input power of up to 36 dBm and provides an isolation of 80 dB. It is available in a radial module that measures 1.25 (Dia.) x 0.4 (H) inches with SMA-female removable connectors and requires a DC supply of +5 / -15 V. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Radiation-Tolerant Transceiver 2025 to 2290 MHz for SATCOM Applications | |
SATCOM Transceiver
from Space Micro
|
| The NANOCOM from Space Micro is an S-Band Transceiver that operates from 2200 - 2290 MHz (Tx) and 2025 - 2100 MHz (Rx). It has a bandwidth of 50 MHz and supports BPSK, QPSK and OQPSK modulation schemes. This radiation-tolerant transceiver has been designed to perform in extreme environmental conditions. It has an on-board 50 MHz TCXO and a Xilinx Zynq System on a Chip (SoC). |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact OCXO from 8 to 13 MHz | |
OCXO
from Abracon LLC
|
| The O-CI-LF Series from NEL Frequency Controls are Oven-Controlled Crystal Oscillators (OCXO) with a frequency range from 8 to 13 MHz. They provide a sinewave or HCMOS/TTL output waveform with a frequency stability of ±20 ppb and a g-sensitivity of ±10 ppb. These SC-cut OCXOs are available in premium or ultimate phase noise options with a phase noise of -163 dBc/Hz (at 1 kHz offset, ultimate version). |
| |
Download Datasheet
Product Details | |
|
|
|
| 27 GHz Non-Magnetic Field-Replaceable SMA Connectors | |
RF Connector
from Signal Microwave
|
| The FRF27-005NM-12 from Signal Microwave are 27 GHz Non-Magnetic Field-Replaceable SMA Connectors. They consist of standard 2 and 4-hole flange connectors with a rear socket for 12 mil pins. These connectors have phosphor bronze housing (gold-plated, no nickel), beryllium copper center contacts (gold-plated, no nickel), and an Ultem dielectric bead. |
| |
Download Datasheet
Product Details | |
|
|
|
| 67 GHz Colour-Coded, Flexible Low-Profile Cable Assemblies | |
RF Cable Assembly
from Maury Microwave
|
| The Stability Plus™ Low Profile Cable Assemblies from Maury Microwave operate up to 67 GHz. They provide the same electrical performance as Maury Microwave’s ruggedized StabilityPlus™ cables, but with a more compact and flexible design. These cable assemblies have excellent phase and amplitude stability with flexure that enables highly reliable and repeatable measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
| Beamforming 5G Antenna Module from 37 to 40 GHz | |
Front End Module
from Doosan Corporation Electro-Materials
|
| The DS-MV_39 from Doosan Corporation is a 5G Antenna Module that operates from 37 to 40 GHz. This dual-polarized (horizontally / vertically) antenna module has an EIRP of 38.5 dBm and an azimuth/elevation beam scan range of ±60°. It provides a gain of 45 dB in Tx mode and a gain of 35 dB in Rx mode. The antenna module incorporates an RF front-end module including a 32-array antenna and beamforming IC. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.92 mm Edge-Lock RF PCB Connector | |
RF Connector
from SV Microwave
|
| The 1521-00005 from SV Microwave is a 40 GHz 2.92 mm Edge-Lock RF PCB Connector. It has an edge-lock design that allows for precision placement prior to the reflow process and ensures optimal RF performance throughout the connector’s full frequency range. This design is developed to form an interference fit between the conical alignment pin and the PCB thru-hole, thus pulling the contact lane of the connector into the edge of the PCB. It has a dielectric withstanding voltage of 500 V (RMS). |
| |
Download Datasheet
Product Details | |
|
|
|
| 1:2 Passive Balun MMIC from 2 to 20 GHz | |
Balun
from Marki Microwave
|
| The MBAL-0220CSP2 from Marki Microwave is a Passive RF Balun MMIC that operates from 2 to 20 GHz. It converts a 50-ohm single-ended signal into a 100-ohm differential waveform with an amplitude balance of 0.3 dB and a phase balance of 3°. This balun provides an isolation (across output ports) of 5.3 dB and has an insertion loss of less than 6 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 kW Antenna-Mountable Ku-Band Block Upconverter (BUC) | |
Block Up Converter
from Mission Microwave
|
| The MOAB-Ku-1 KW from Mission Microwave is a Block Upconverter (BUC) that operates in the Ku-Band from 13.75 to 14.5 GHz (or 14.0-14.5 GHz). It delivers an output power of 1000 W (~60 dBm). This BUC has Ethernet and serial interfaces and can be connected with Mission’s GUI on a remote PC for monitoring and control. It is available in a rack-mount enclosure that measures 22.25 x 10.25 x 10.50 inches and can be mounted on the hub of antennas. |
| |
Download Datasheet
Product Details | |
|
