New products this week. View it in your browser
| | | Weekly Edition | | | Date: 10 April, 2024 | | | |
| Sponsored by Space Tech Expo | | |
| New RF and Microwave Products this Week . |
| Dual-Channel Integrated Downconverter from 5 to 32 GHz | |
Down Converter
from Analog Devices
| | The ADMFM2000 from Analog Devices is a Dual-Channel Downconverter that converts input frequencies from 5 – 32 GHz to output frequencies from 0.5 – 8 GHz. Each down conversion path consists of a low noise amplifier (LNA), a mixer, an IF filter, a digital step attenuator (DSA), and an IF amplifier. A common LO input signal is split to feed two separate buffer amplifiers to drive the mixer in each channel. | | |
Download Datasheet
Product Details |
|
| Ultra Low Noise Amplifier from 0.4 - 3.0 GHz for Space and Military Applications | |
RF Amplifier
from Teledyne e2v HiRel Electronics
| | The TDLNA0430SEP from Teledyne e2v HiRel is a rad-tolerant UHF to S-band low noise amplifier that operates from 0.4 to 3 GHz. This high linearity amplifier has been developed for harsh environments where it can be used as a first-stage LNA for advanced satellite or military communication receivers or radar systems. It provides 21.5 dB of gain with a noise figure of 0.35 dB and has a P1dB of 18.5 dBm. | | |
Download Datasheet
Product Details |
|
| Low Noise Amplifier from 17.7 to 22 GHz for SATCOM Applications | |
RF Amplifier
from ERZIA
| | The ERZ-LNA-1770-2200-40-1.5 from ERZIA is a Ka-Band Low Noise Amplifier for SATCOM that operates from 17.7 to 22 GHz. It provides a small signal gain of over 36 dB with a noise figure of less than 1.2 dB and has a P1dB of 10 dBm. The amplifier requires 12 V of DC supply and consumes 1.1 W of power. It is available in a compact aluminum housing that measures 41.4 x 21.0 x 22.4 mm with a WR42 waveguide interface at the input and SMA Female connector at the output. | | |
Download Datasheet
Product Details |
|
| Low Noise Cryogenic Amplifier from 1 to 18 GHz | |
RF Amplifier
from AmpliTech
| | The APTC4-01001800-1905-D4 from AmpliTech is a Low Noise Cryogenic Amplifier that operates from 1 to 18 GHz. It provides a gain of more than 30 dB with a noise figure of less than 2 dB and has a P1dB of over 5 dBm. The amplifier uses State-of-the-Art pHEMT technology and is designed for cryogenic applications down to 4°K. It requires a DC supply voltage of 9 V, draws 60 mA of current, and consumes 819 mW of power at 296°K. | | |
Download Datasheet
Product Details |
|
| 39 dBm GaN MMIC Power Amplifier from 2 to 18 GHz | |
RF Amplifier
from AMCOM Communications, Inc.
| | The AM02018039WN-SN-R from AMCOM Communications is a GaN MMIC Power Amplifier that operates from 2 to 18 GHz. The amplifier provides a saturated output power of 39 dBm, P1dB of 34 dBm and a small signal gain of 20 dB. It requires a 28 V DC supply and consumes less than 1300 mA of current. The amplifier is available in a RoHS compliant ceramic package with a flange and straight RF and DC leads for drop-in assembly. | | |
Download Datasheet
Product Details |
|
| Real-Time Handheld Spectrum Analyzer from 9 kHz to 20 GHz | |
RF Spectrum Analyzer
from HAROGIC Technologies
| | The PXE-200 from Harogic is a real-time handheld spectrum analyzer with a frequency range from 9 kHz to 20 GHz. This SWaP-C analyzer provides a good combination of size, performance and cost. It can be used to perform real-time spectrum analysis based on an FPGA and can measure channel power, ACPR, IM3, OBW, phase noise, time domain IQ, PvT, real-time spectrum R&P, etc. along with AM/FM analog modulation analysis. | | |
Download Datasheet
Product Details |
|
| Sponsored by Space Tech Expo | | | |
| USB and Ethernet Controlled Signal Generator from 0.1 to 44 GHz | |
Signal Generator
from Mini Circuits
| | The SSG-44G-RC from Mini-Circuits is a Signal Generator with a frequency range from 0.1 to 44 GHz. It can be controlled to provide an output power from –40 to 17 dBm with a power level resolution of 0.5 dB and a frequency resolution of 1 Hz. The signal generator can be controlled via USB or Ethernet (supporting SSH, HTTP & Telnet protocols) and is designed to connect up to 25 modules in series (daisy chain) using dynamic addressing. | | |
Download Datasheet
Product Details |
|
| 0.8 mm Vertical Launch Connectors from DC to 145 GHz | |
RF Connector
from Withwave
| | The 0.8 mm Vertical Launch Connectors from Withwave operate from DC to 145 GHz. They have been developed specifically for making solderless connections on test and measurement boards. These connectors have excellent electrical transition performance over the entire frequency range and reduce installation time by eliminating soldering. | | |
Download Datasheet
Product Details |
|
| 4-Way Power Divider/Combiner from 0.5 to 8 GHz | |
Power Divider
from MECA
| | The 804-4-4.250 from MECA is a 4-Way Power Divider/Combiner that operates from 0.5 to 8 GHz. It can handle an input power of up to 30 W, provides more than 16 dB of isolation and has an insertion loss of less than 2.8 dB. This power divider/combiner has a VSWR of 1.20:1, an amplitude balance of ±0.6 dB and a phase balance of less than ±12°. | | |
Download Datasheet
Product Details |
|
| 8-Way Power Divider from 118 to 174 MHz | |
Power Divider
from Broadwave Technologies
| | The 159-306-008 from Broadwave Technologies is an 8-way Power Divider that operates from 118 to 174 MHz. It can handle an input power of up to 5 W and provides an isolation of more than 20 dB. This power divider has an amplitude balance of ±0.5 dB and a phase balance of ±5°. It is available in a module with an SMA-female input connector and N-type (female) output connectors. | | |
Download Datasheet
Product Details |
|
| 10 dB Dual-Directional Coupler from 0.7 to 14 GHz | |
Dual Directional Coupler
from KRYTAR
| | The 500714010 from Krytar is a Dual-Directional Coupler that operates from 0.7 to 14 GHz. This 10 dB coupler provides a directivity of more than 12 dB and has a frequency sensitivity of ±0.85 dB. It can handle an average input power of up to 20 W and a peak input power of 3 kW. This 4-port coupler is a combination of two 3-port couplers having their main lines cascaded and enables monitoring of forward and reflected power. | | |
Download Datasheet
Product Details |
|
| Sponsored by Space Tech Expo | | |
| Waveguide Frequency Tripler with Out Frequency from 200 to 300 GHz for 5G Applications | |
Frequency Multiplier
from ACST GmbH
| | The 213A From ACST GmbH is a Frequency Tripler that converts input frequencies from 66.66 – 78.33 GHz to output frequencies from 200 – 300 GHz. It provides an output power of +16.5 dBm and has a Conversion efficiency of up to 24%. This frequency tripler is based on ACST’s high-power multiplier technology that allows for building cost-effective mmWave sources in combination with powerful commercially available high-power amplifier MMIC technologies. | | |
Download Datasheet
Product Details |
|
| LoRa Connectivity Module for IoT Applications | |
RF Module
from Murata
| | The Type 2GT from Murata is a LoRa Connectivity Module that operates at 860-930 MHz, 2.4 GHz ISM band and 2.1 GHz satellite S-Band. It provides multi-band LoRa and Long Range - Frequency Hopping Spread Spectrum (LR-FHSS) communication and is designed for global deployment with Radio Law certification obtained for major regions. | | |
Download Datasheet
Product Details |
|
| Quad-Core Bluetooth 5.4 LE Modules with Global Certification | |
RF Module
from u-blox AG
| | The ALMA-B1 Series from u-blox are Standalone Multicore Bluetooth Low Energy 5.4 Modules. They offer excellent processing power, efficiency, and receiver sensitivity in a small form factor with support for Thread, Matter, and NFC protocols. These modules are powered by Nordic Semiconductor’s 4th generation nRF54H20 SoC with a quad-core microcontroller unit (MCU) up to 320 MHz. | | |
Download Datasheet
Product Details |
|
| Multi-constellation, Multi-band GNSS Receiver with RTK Support | |
GNSS Module
from Telit Communications
| | The SE868K5-RTK from Telit Cinterion is a Multi-constellation GNSS Receiver. It operates in the GPS/QZSS (L1, L5), Galileo (E1, E5), GLONASS (L1), and BeiDou (B1, B2) bands. This module includes an optimized positioning engine for high-quality navigation and achieves a horizontal positional accuracy of better than 1 m (without RTK) and 1 cm (with RTK). | | |
Download Datasheet
Product Details |
|
| L1/L2-Band, Anti-Jamming GNSS Antenna with Sub-1 cm Accuracy | |
GPS/GNSS Antenna
from Tallysman Wireless
| | The TW5394 from Tallysman Wireless is a Multi-band (L1/L2) GNSS Antenna. It has integrated L-Band receiver for PointPerfect PPP-RTK corrections. This antenna has been designed to provide sub-1 m (standalone), sub-6 cm (PPP-RTK corrections), and sub-1 cm (RTK corrections) accuracy to support demanding navigation, automation, and precision mobility applications. | | |
Download Datasheet
Product Details |
|
| 63 W GaN Solid-State Power Amplifier from 2 to 20 GHz | |
RF Amplifier
from RF-Lambda
| | The RFLUPA0220GD-B from RF Lambda is a Solid-State Power Amplifier (SSPA) that operates from 2 to 20 GHz. It delivers a saturated output power of 63 W (~48 dBm) with a small signal gain of 50 dB. This wideband amplifier is based on GaN technology and includes an auto-calibration feature to achieve maximum performance through time and temperature changes. | | |
Download Datasheet
Product Details |
|
| Rugged 20 W GaN Power Amplifier from 2 to 6 GHz | |
RF Amplifier
from RFTR Electronics
| | The JA20006000P43 from RFTR Electronics is a Solid-State Power Amplifier (SSPA) that operates from 2 to 6 GHz. It delivers an output power of 20 W with a gain of 53 dB. This amplifier uses GaN-on-SiC transistors and has a solid-state class AB design. It can be enabled/disabled in 3 µs which makes it suitable for power saving during pulsed applications. | | |
Download Datasheet
Product Details |
|
| GaN Power Amplifier Die from 27 to 31 GHz | |
RF Amplifier
from mmTron Inc
| | The TMC215 from mmTron is a Linear Power Amplifier that operates from 27 to 31 GHz. It provides a small signal gain of 23 dB with a power-added efficiency (PAE) of 24% and has an output P1dB of 46.5 dBm (45 W). This three-stage amplifier is based on a GaN HEMT process and has on-chip DC blocking capacitors at input and output. It requires a DC supply of 28 V and consumes 2 A of current. | | |
Download Datasheet
Product Details |
|
| Rugged 50 W RF Terminations from DC to 6 GHz | |
Termination
from Pasternack Enterprises Inc
| | The PE6TR118x Series from Pasternack Enterprises are RF Terminations (Loads) that operate from DC to 6 GHz. They can handle an input power of up to 50 W and have a VSWR of less than 1.25:1. These 50-ohm terminations have a heatsink body designed to provide adequate heat dissipation within their frequency range of operation. | | |
Download Datasheet
Product Details |
|
| SATCOM Antenna from 17.7 to 31 GHz with Anti-Jam Capabilities | |
SATCOM Antenna
from ThinKom
| | The ThinAir GT 1717 from ThinKom is a SATCOM Antenna that operates from 17.7 to 21.2 GHz (Rx) and 27.5 to 31 GHz (Tx). It has been developed to operate on commercial and government networks, including LEO, MEO, GEO, and HEO constellations. This antenna ensures a low probability of intercept/detection and features inherent anti-jam robustness to operate in demanding EMI, EMC, and EMP environments. | | |
Download Datasheet
Product Details |
|
| Solid-State Airborne Receiver/Decoder from 406 to 450 MHz | |
Receiver
from L3Harris Technologies
| | The AFTR-925 from L3Harris is an Airborne Receiver/Decoder that is ideal for missiles, targets, launch vehicles, drones and UAV programs. This state-of-the-art receiver features three or four-channel tone logic and redundant failsafe circuitry. It utilizes modern component technology and packaging techniques while retaining the highly reliable functional and environmental integrity of previous designs. This receiver has a tuning range from 406 to 450 MHz and can demodulate up to four simultaneous tones at 30 kHz nominal peak frequency deviation. | | |
Download Datasheet
Product Details |
|
| 5G Terminal Mount Antenna from 600 to 6000 MHz | |
Antenna
from Quectel
| | The YECT000WBA from Quectel is a 5G Terminal Mount Antenna that operates from 600–960 MHz, 1400-2690 MHz and 3300-6000 MHz covering 5G NR Sub-6 GHz/4G/3G/2G/LPWA bands. It has an efficiency of up to 98.5% and an omnidirectional radiation pattern delivering high gain to ensure high-speed data transmission. | | |
Download Datasheet
Product Details |
|
| | About everything RF | | everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest news, information on new product releases, white papers, articles, interviews and much more. |
|
| To unsubscribe please click here | [Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip] |
|
