| Featured Products this Week . |
|
|
| Class A Solid-State Low Noise Amplifier from 10 MHz to 18 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The LNA2006 from Exodus Advanced Communications is a Solid-State Low Noise Amplifier (SSLNA) that operates from 10 MHz to 18 GHz. It provides a gain of 23 dB with a noise figure of 4.5 dB and has an output P1dB of more than 20 dBm. This amplifier is based on Class A linear advanced technology design and has a small form-factor. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 4-Channel Vector Signal Generator from 9 kHz to 8.5 GHz | |
Signal Generator
from Keysight Technologies
|
| The N5186A MXG from Keysight Technologies is a 4-channel Vector Signal Generator with a frequency range from 9 kHz to 8.5 GHz. It delivers an output power of up to +27 dBm with a phase noise of -147 dBc/Hz (at 10 kHz offset) and has a frequency resolution of 1 x 10-5 Hz. This signal generator is capable of generating signals with a modulation bandwidth of 960 MHz. |
| |
Download Datasheet |
Product Details | |
|
|
|
| USB Controlled VNA from 100 KHz to 6 GHz | |
Vector Network Analyzer
from Tektronix, Inc.
|
| The TTR506A from Tektronix is USB Controlled Vector Network Analyzer that operates from 100 KHz to 6 GHz. This 2-port, 2-path S-parameter VNA has been developed for applications such as measuring passive/active components, antennas and matching networks, RF modules, test cables, adapters and education. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Amplified AWGN Noise Modules from 10 Hz to 18 GHz | |
Noise Source
from Noisecom
|
| The NC1000 Series from Noisecom are Amplified AWGN Noise Modules that operate from 10 Hz to 18 GHz. They produce white Gaussian noise of up to +13 dBm and have a typical temperature coefficient of 0.025 dB/°C. These high noise power modules are designed for secure communications and signal jamming, while the low power noise modules with high crest factor are used for signal impairment in BER, and Jitter applications. |
| |
Download Datasheet |
Product Details | |
|
|
|
| USB Power Sensor from 9 kHz to 44 GHz | |
RF Power Meter & Sensor
from LadyBug Technologies
|
| The LB5944L from Ladybug Technologies is a True RMS Microwave Power Sensor that operates from 9 kHz to 44 GHz. The high sensitivity, high accuracy RF sensor is ideal for EMC applications, general-purpose average power, and scalar measurements. It is recommended for average power measurements on signals of any modulation type, including 802.11ac, GSM, CDMA 2000, CDMA (IS-95), TDMA, Multi-Tone, OFDM, CW, and QAM. |
| |
Download Datasheet |
Product Details | |
|
|
|
| VNA Cable Assemblies from DC to 67 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The Stability VNA Cable Assemblies from Maury Microwave are Test Port Cable Assemblies that operate from DC to 67 GHz. They have excellent phase stability (up to 8 degrees) with flexure and ensure repeatable and reliable measurements. The assemblies have an anti-skid band to ensure that they can be arbitrarily positioned with no spring-back or stress on the DUT. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
| Flexible Microwave Cable Assembly from DC to 40 GHz | |
RF Cable Assembly
from HUBER+SUHNER
|
| The SUCOFLEX 540E from HUBER+SUHNER is a High-Flexibility Microwave Cable Assembly that operates from DC to 40 GHz. It is available with 2.9 mm or 2.4 mm connectors and is designed to provide an ideal solution for precise measurements in critical laboratory conditions. This 50-ohm cable assembly delivers high phase and amplitude stability with flexure and movement and has a unique design that ensures zero spring back and facilitates efficient handling during measurement. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Wire-Wound Ferrite Core Chip Inductors up to 200 nH | |
RF Inductor
from Coilcraft
|
| The 0201AF Series from Coilcraft are Wire-Wound Ferrite Core Chip Inductors with inductance values of up to 200 nH. They are optimized for RF isolation in applications ranging from 900 MHz to 9 GHz. The inductors have a low-loss ferrite construction that ensures high impedance, high current handling capability, and low dynamic contact resistance (DCR) in a single package. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 2-Way Power Divider from 0.5 to 26.5 GHz | |
Power Divider
from Werbel Microwave
|
| The WM2PD-0.5-26-S from Werbel Microwave is a 2-way Power Divider that operates from 0.5 to 26.5 GHz. It can handle a CW input power of up to 10 W, provides an isolation of more than 14 dB, and has an insertion loss of less than 2.3 dB. This power divider has an amplitude balance of ±0.24 dB and a phase balance of ±6°. It exhibits an excellent VSWR performance over an operating temperature range from -55°C to +85°C. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Magnetically-shielded Cryogenic Circulator from 8 to 12 GHz | |
RF & Microwave Circulator
from DiTom Microwave
|
| The D4C8012YMG from DiTom Microwave is a Cryogenic Circulator that operates from 8 to 12 GHz. It can handle an average input power of 25 W and a peak input power of 500 W. This circulator has an insertion loss of less than 0.5 dB and provides more than 20 dB of isolation. It can operate at temperatures lower than 77 K and is magnetically shielded to prevent external noise from degrading the performance. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Flexible EMI Absorption Sheets from 100 MHz to 18 GHz | |
Microwave Absorber
from ARC Technologies, Inc.
|
| The WX-A series of Waveguide Absorbers have been specifically designed with high permeability, temperature and corrosion resistance. They operate from 100 MHz to 18 GHz and are available in sheets with a thickness of 0.005 inches to 1 mm. The sheets provide superior EMI absorption by combining proprietary, high-performance magnetic materials into a flexible, resilient elastomer. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Open Boundary Quad-Ridged Horn from 0.7 to 10 GHz | |
Horn Antenna
from ETS-Lindgren
|
| The 3164-08 from ETS Lindgren is an Open Boundary Quad-Ridged Horn Antenna that operates from 700 MHz to 10 GHz. This linear or circular polarized (with hybrid option) horn provides cross-polarization isolation of more than 20 dB. It has an open boundary design similar to two double-ridged waveguide antennas placed orthogonally to each other. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 250 W Weatherproof GaN Block Upconverter (BUC) from 7.9 to 8.4 GHz | |
Block Up Converter
from Advantech Wireless Technologies
|
| The SSPBM-X from Advantech Wireless is a Solid-State Block Upconverter (BUC) that converts input frequencies from 950 – 1450 MHz to output frequencies from 7.9 – 8.4 GHz. It delivers an output power of up to 250 W with a gain of 74 dB and has a gain adjustment range of 20 dB (in 0.1 dB steps). This BUC is based on GaN technology and provides high power density in a compact size. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Halogen-free, Very Low Loss Laminate for 5G Infra and Computing Applications | |
Laminate
from Isola Group
|
| The TerraGreen® 400G from Isola is an Extremely Low Loss Laminate that is designed for next-generation 5G infrastructure and computing applications. It exhibits exceptional electrical properties which are very stable over a broad frequency and temperature range. The laminate is engineered for high-performance applications as power amplifier boards for LTE base stations, internet infrastructure, and cloud computing. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 3U RF Up/Down Converter from 0.5 to 18 GHz for Electronic Warfare Applications | |
Integrated Microwave Assembly
from Cobham Advanced Electronic Solutions
|
| The 3U RF Up/Down Converter from Cobham Advanced Electronic Solutions (CAES) operates from 0.5 to 18 GHz. This SOSA-aligned, single 3U slot up/down RF converter has an integrated LO and supports frequency preselection. It has an IF of 3.5 GHz and a tuning speed of 350 ns. The converter has a modular architecture and can accommodate various channel configurations such as 1 up and 1 down, 2 up or 2 down. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 6.5/8 GHz UWB Transceiver IC for Automotive Applications | |
RF Transceiver
from Qorvo
|
| The DW3300Q from Qorvo is an Ultra-Wideband (UWB) Transceiver IC that supports UWB channels 5 and 9 (6489.6 MHz and 7987.2 MHz). It is compliant with IEEE STD 802.15.4-2020 and IEEE STD 802.15.4z-2020 (BPRF mode) for automotive applications. This UWB transceiver delivers a data rate of up to 6.8 Mbps and has a ranging accuracy of up to 10 cm. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Space Qualified VCXO from 0.256 to 52.5 MHz | |
VCXO
from Rakon
|
| The RVX2213S from Rakon is a space grade VCXO that operates from 0.256 to 52.5 MHz. This VCXO has an extremely high pulling ability of ±375 ppm. It is manufactured in accordance with MIL-PRL-55310 Class 2, level S and is designed for space missions where it is resistant to the demanding environment, has a short lead-time and meets the radiation tolerance requirements. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| Automotive-Grade LTE Cat-4 Module for IoT and M2M Applications | |
Cellular Module
from Cavli Wireless
|
| The AQ20 from Cavli Wireless is an Automotive-Grade LTE Cat 4 Module for IoT and M2M applications. It has built-in support for multi-constellation GNSS with Qualcomm IZat location technology for precise and dependable positioning. This module supports VoLTE and SMS over IMS/SG/CS and a wide set of Internet protocols. It is available in two variants: the AQ20-EA for the Europe and Asia markets and the AQ20-NA for the North American market. |
| |
Download Datasheet |
Product Details | |
|
|
|
| mmWave, Automotive Radar Sensor Module from 60 to 64 GHz | |
Radar Sensor
from Murata
|
| The Type 1VM from Murata is an mmWave Radar Sensor Module that operates from 60 to 64 GHz. It utilizes a Texas Instruments AWR6843 chipset (including C674x DSP for advanced signal processing) with ARM Cortex-R4F CPU core, 16M-bit Serial Flash Memory and built-in optimized patch antennas. This module is optimized for in-cabin sensing like CPD and OMS and can precisely detect distance, angle of arrival and velocity between target objects in harsh environments. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Low PIM, Quarter-Wave Surge Protector from 555 to 4500 MHz | |
RF Surge Protector
from PolyPhaser
|
| The QWP-DMDF-ER from PolyPhaser is a Low PIM, Quarter Wave Surge Protector that operates from 555 to 4500 MHz. It can handle a CW input power of up to 200 W and a surge current of 50 kA. This 50-ohm surge protector has an insertion loss of less than 0.1 dB and Passive Intermodulation (PIM) distortion of better than -160 dBc. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Dual-Thread, 96-Channel Encrypted Airborne GPS Receiver | |
GNSS Module
from BAE Systems
|
| The Airborne SAASM Receiver (ASR) 3.7-DS from BAE Systems is an Airborne GPS Receiver for L1 and L2 bands. It has 96 channels (48 hardware channels per thread) and hosts individual civil and military receivers on a single ASR form factor board. This receiver has a Wide Area Augmentation System (WAAS) capability for extremely accurate positioning. |
| |
Download Datasheet |
Product Details | |
|
