| Featured Products this Week . |
|
|
| Real-Time Handheld Spectrum Analyzer from 9 kHz to 20 GHz | |
RF Spectrum Analyzer
from HAROGIC Technologies
|
| The PXE-200 from Harogic is a real-time handheld spectrum analyzer with a frequency range from 9 kHz to 20 GHz. This SWaP-C analyzer provides a good combination of size, performance and cost. It can be used to perform real-time spectrum analysis based on an FPGA and can measure channel power, ACPR, IM3, OBW, phase noise, time domain IQ, PvT, real-time spectrum R&P, etc. along with AM/FM analog modulation analysis. |
| |
Download Datasheet
Product Details | |
|
|
|
| Test Application Software for FR1/FR2 5G Including RedCap and NTN | |
RF Test Set
from Keysight Technologies
|
| The S8711A UXM 5G Test Application from Keysight is a software interface for the UXM One Box Tester to analyze 5G NR chipsets and devices. It is an interactive real-time testing tool that covers the full chipset and device development workflow from early prototype testing through integration and verification. This software allows users to fully control the network environment and validate customized testing campaigns through RF performance and functional KPI. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Port VNA from 70 kHz to 220 GHz with Optional Spectrum Analyzer | |
Vector Network Analyzer
from Anritsu
|
| The VectorStar ME7838G4 from Anritsu is a 4-Port Vector Network Analyzer (VNA) that operates from 70 kHz to 220 GHz. It performs measurements utilizing compact mmWave modules with industry-best calibration stability and includes broadband systems with positive raw directivity. This VNA incorporates the Anritsu MA25400A mmWave module which combines Anritsu’s Nonlinear Transmission Line (NLTL) technology in a small, compact high performance mmWave module for measurements up to 220 GHz. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5G Cavity Bandpass Filter with Passband from 37.7 to 43.5 GHz | |
Band Pass Filter
from Mini Circuits
|
| The ZVBP-40600-K1+ from Mini-Circuits is a Cavity Bandpass Filter with a passband from 37.7 to 43.5 GHz. It has a passband insertion loss of 1.8 dB and provides an out-of-band rejection of 88 dB (lower-band) and 79 dB (upper-band). This filter is designed by implementing resonant structures with very high Q-factor and narrow-band selectivity. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Profile Ceramic Core Chip Inductors from 1 to 56 nH | |
RF Inductor
from Coilcraft
|
| The 0603CT Series from Coilcraft are Low-Profile Ceramic Core Chip Inductors available in inductance values from 1.0 to 56 nH. They have Q-factors up to 95, a self-resonant frequency (SRF) of 16.0 GHz and a DC resistance of less than 0.700 ohms. These inductors are available in surface-mount packages that measure 1.63 x 0.84 x 0.61 mm with Tin over Ni over Ag-Pt-glass frit termination. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Scientific Microwave Corporation | | | |
|
|
| 20 W GaN Power Amplifier from 8.2 to 11.8 GHz | |
RF Amplifier
from Analog Devices
|
| The ADPA1122 from Analog Devices is a Power Amplifier that operates from 8.2 to 11.8 GHz. It delivers an output power of 20 W with a small signal gain of 31 dB and a power-added efficiency (PAE) of 46%. This GaN amplifier has an integrated temperature-compensated RF power detector and is optimized for pulsed applications such as military, marine, and weather radar. |
| |
Download Datasheet
Product Details | |
|
|
|
| SOSA-Aligned Microwave Transceiver from 6 to 18 GHz for EW Applications | |
RF Transceiver
from Mercury Systems
|
| The RFM3111 from Mercury is a Microwave Transceiver that operates from 6 to 18 GHz. In Tx mode, it provides a gain of 20 dB, has a noise figure of less than 26 dB, and a P1dB of 21 dBm. In Rx mode, it provides a gain of 25 dB, has a noise figure of less than 17 dB, and a P1dB of 16 dBm. The transceiver has a versatile local oscillator (LO), low-phase noise, and fast tuning speed. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 kW GaN Pulsed Solid-State Power Amplifier from 1 to 2 GHz | |
RF Amplifier
from Advanced Amplifiers
|
| The AA-12G-2KWP from Advanced Amplifiers is a Pulsed Solid-State Power Amplifier (SSPA) that operates from 1 to 2 GHz. It delivers a peak output power of more than 2 kW with a gain of over 63 dB and has a pulse width of up to 100 µs (duty cycle – 10%). This SSPA is based on a Class AB linear GaN design that is suitable for high-power pulse applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| In-line Band Pass Filter MMIC with Passband from 17.52 to 21.45 GHz | |
Band Pass Filter
from AmpliTech
|
| The APTX-17522145-BPF-X1001 from AmpliTech is a Coaxial In-line Band Pass Filter MMIC with a passband from 17.52 to 21.45 GHz (19.45 GHz center frequency). It can handle an RF input power of up to +20 dBm, has a passband insertion loss of 2.69 dB and provides a stopband rejection of 20 dB. This BPF is available in a module that measures 0.38 (Dia.) x 1.31 (L) inches with SMA (male/female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| MIL-Qualified 3-Way GNSS Splitter from 1.1 to 1.7 GHz | |
Power Divider
from GPS Networking
|
| The MIL-NLDCBS1x3 from GPS Networking is a 3-Way Military Qualified Networked Loaded DC Blocked Splitter that operates from 1.1 to 1.7 GHz. It covers all major GNSS frequency bands, has excellent gain flatness, an insertion loss of less than 9.1 dB and provides 15 dB of isolation. The power splitter can accept any DC voltage from 8 to 32 V which is then regulated down to 5 V to power the GPS Antenna. |
| |
Download Datasheet
Product Details | |
|
|
|
| Helical Cavity Bandpass Filter from 150.5 to 155.5 MHz | |
Band Pass Filter
from ECHO Microwave
|
| The EHCA153P5BR50B from ECHO Microwave is a Helical Cavity Bandpass Filter with a passband from 150.5 to 155.5 MHz. It can handle a CW input power of up to 50 W, has an insertion loss of less than 1 dB and provides an attenuation of above 50 dB above and below the passband. This ceramic filter is available in a module with N-type (Female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 24 GHz SiGe Quad Receiver Radar MMIC for Automotive Applications | |
Automotive Radar Chipset
from Infineon Technologies
|
| The BGT24AR4 from Infineon Technologies is a Silicon Germanium Quad Receiver Radar MMIC that operates from 24.0 GHz to 24.25 GHz. It provides a power gain of more than 47 dB and has a single side-band noise figure of 10 dB. The radar chip features four separate homodyne receiver chains each with a downconverter operating with an input RF frequency of 24 GHz. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| J-Band VNA Frequency Extender from 220 to 330 GHz | |
Vector Network Analyzer Extender
from ERAVANT
|
| The STO-03203N05-T-E1 from Eravant is a Vector Network Analyzer (VNA) Frequency Extender that operates in the J-Band from 220 to 330 GHz. It supports input frequencies from 9.1 to 13.75 GHz and integrates a Tx/Ref pair that has been designed to achieve full 1-port, S-parameter testing over the operating (extended) frequency range. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5 GHz, 256-QAM Front-End Module for 802.11ac Applications | |
Front End Module
from Microchip Technology
|
| The LX5589H from Microchip Technology is a 5 GHz 802.11ac Front-End Module (FEM). It has been designed to reduce the system footprint, bill of materials, and manufacturing cost. This module integrates a highly linear power amplifier (PA), log power detector, low noise amplifier (LNA) with bypass capability, and an SPDT Tx/Rx antenna switch. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5 GHz Front End Module for Wi-Fi 7 (802.11be) Applications | |
Front End Module
from Qorvo
|
| The QPF4559 from Qorvo is a 5 GHz Front-End Module (FEM) for Wi-Fi 7 (802.11be) systems. The FEM has an integrated 5 GHz power amplifier (PA), a single pole two-throw switch (SP2T), and a bypassable low noise amplifier (LNA). It has integrated die-level filtering for 2nd and 3rd harmonics as well as 2.4 GHz rejection for DBDC operation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Ruggedized, Multi-Band Handheld Transceiver from 30 to 512 MHz | |
Software Defined Radio
from Datron
|
| The HH3100 from Datron is a Handheld Transceiver that operates in the VHF Band from 30 to 512 MHz. It offers 100 programmable channels at 25 kHz or 12.5 kHz spacing. This transceiver supports simplex and half-duplex modes and provides a user-selectable output power of 500 mW to 7 W. It provides accurate position and time-of-day capability using the embedded GPS receiver. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Multiprotocol Wireless SoCs for Mesh IoT Connectivity | |
Wireless Chipset
from Silicon Labs
|
| The EFR32MG24 Series 2 from Silicon Labs are 2.4 GHz Multiprotocol Wireless SoCs that support mesh IoT wireless connectivity using Bluetooth LE 5.3, Matter, OpenThread and Zigbee protocols. These SoCs include an AI/ML hardware accelerator and Secure Vault to enable smart, robust, and energy-efficient products that are secure from remote and local cyber-attacks. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Power Multi-Band Cat-M/NB-IoT Module for e-Health Applications | |
Cellular Module
from SIMCom
|
| The SIM7080G from SimCom is a Multi-Band Cat-M/NB-IoT Module. It has been designed for applications that require low latency and enables low throughput data communication in a variety of radio propagation conditions. This module supports both Cat-M and NB-IoT technologies in a single package and offers a unique combination of performance, security, and flexibility, providing flexibility and ease of integration for the customer’s application. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Triplexer from 617 to 4200 MHz for In-Building Wireless Infra Applications | |
Triplexer
from Westell Technologies
|
| The CS06-617-38C from Westell is a Triplexer that operates from 617 – 960 MHz, 1695 – 2690 MHz, and 3400 – 4200 MHz. It has been designed to combine three different frequency bands during transmission and reception to support carrier aggregation for licensed bands. This triplexer can handle an input power of 250 W, provides an isolation of more than 50 dB, and has an insertion loss of less than 0.40 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8-Port Single-Sector MIMO Panel Antenna from 1695 to 4200 MHz | |
Base Station Antenna
from Galtronics USA, Inc
|
| The GP2408-B7057 from Galtronics is an 8-Port MIMO Panel Antenna that operates in the C-Band from 1695-2690 MHz and 3300-4200 MHz. This ±45° polarized antenna provides a gain of up to 16.7 dBi and has a VSWR of 1.50:1. It has an azimuth beamwidth from 22 to 28°, an elevation beamwidth of up to 28° and a front-to-back ratio of 35 dB. |
| |
Download Datasheet
Product Details | |
|
