| New RF and Microwave Products this Week . |
|
|
| Programmable Triple-Band Block-Up Converters from 27.5 to 30 GHz | |
Block Up Converter
from EM Research
|
| The TBUC Series from EM Research are Digitally Programmable Block-Up Converters (BUCs). They can convert input frequencies (IF) from 950 – 1950 MHz to output frequencies (RF) from 27.5 – 28.5 GHz (Band 1), 28.5-29.5 GHz (Band 2), and 29-30 GHz (Band 3). These BUCs deliver three block up-converters in a single compact package and any one of three bands can be selected using standard communication protocols such as CAN, RS-232, or I2C. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Space-Qualified 20 dB Waveguide Isolator from 81 to 86 GHz | |
Waveguide Isolator
from Smiths Interconnect
|
| The 26CP401 from Smiths Interconnect is a Waveguide Isolator that operates in the E-Band from 81 to 86 GHz. It can handle a CW input power of up to 50 W, provides an isolation of more than 20 dB and has an insertion loss of less than 1.2 dB. This isolator has an operating temperature range of -40 to +80°C and is ideal for satellite uplink for LEO communication constellations and ground station applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 750 W Solid-State High-Power Amplifier from 80 to 1000 MHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2071A-LC from Exodus Advanced Communications is a solid-state high-power amplifier that operates from 80 to 1000 MHz. This class A/AB linear amplifier provides over 750 Watts of saturated power (600 W P1dB) with a power gain of over 60 dB. This LDMOS amplifier features built-in protection circuits and is suitable for all single channel modulation standards. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Signal Source Analyzer from 1 MHz to 54 GHz | |
Phase Noise Analyzer
from Keysight Technologies
|
| The E5058A SSA-X from Keysight Technologies is a Signal Source Analyzer with a frequency range from 1 MHz to 54 GHz. It evaluates the phase noise and other relevant parameters for RF signals and provides precise and accurate measurements in one box. This analyzer enables absolute and residual phase noise measurements with the built-in, clean internal signal source and advanced path delay compensation technology. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| YIG Based 2-Channel RF Signal Synthesizers from 10 MHz to 20 GHz | |
Frequency Synthesizer
from Holzworth Instrumentation
|
| The HSY Series from Holzworth are YIG-based RF Signal Synthesizers that operate from 10 MHz to 3/6/12/20 GHz. They are available in 1 and 2-channel options, with each channel having an accurate dynamic range from -110 to +18 dBm. The synthesizers have a frequency step size of 0.001 Hz, a phase offset resolution of 0.1º, and a switching speed of less than 50 ms. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 67 GHz Flexible, Colour-Coded VNA Test Cable Assemblies | |
RF Cable Assembly
from Maury Microwave
|
| The StabilityVNA™ (SV-Series) from Maury Microwave are 67 GHz Test Port VNA Cable Assemblies. They offer excellent amplitude and phase stability with flexure, thereby improving measurement accuracy while reducing measurement uncertainty. These cable assemblies have excellent flexibility and anti-skid bands to ensure the cables can be arbitrarily positioned without spring-back or stress on DUTs. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged, Surface Mount Broadband Conical Inductors | |
RF Inductor
from Coilcraft
|
| The BCR Series are conical inductors available in nine inductance values ranging from 0.22 to 8.0 uH. They have been designed specifically for broadband and high-frequency applications from 10 MHz to 40 GHz. The inductors are ideal for use in ultra-wideband bias tees, where the conical inductor provides the path for the DC bias injection or extraction while isolating the power source from the active device. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF-Over-Fiber Converter + Backconverter from 10 MHz to 10 GHz | |
RF Over Fiber Module
from Aaronia AG
|
| The 10100 from Aaronia AG is an RF-Over-Fiber Converter + Backconverter that operates from 10 MHz to 10 GHz. It offers very high dynamic and linear frequency response and makes it possible to transmit RF signals via fiber optic cables with lengths that span up to 100 km. This converter has a galvanic separation between the transmitter and receiver. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| 30 W GaN Power Amplifier MMIC from 2.5 to 3.8 GHz | |
RF Amplifier
from AMCOM Communications, Inc.
|
| The AM253845WN-SN-R from AMCOM Communications is a GaN Power Amplifier MMIC that operates from 2.5 to 3.8 GHz. It delivers a saturated output power of 45 dBm (30 W) with a small signal gain of 22 dB and an efficiency of 27%. This amplifier requires a DC supply of 28 V and consumes less than 2400 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2-Way Wilkinson Power Splitter from 10 to 40 GHz | |
Power Divider
from Analog Devices
|
| The ADAR5001 from Analog Devices is a 2-Way Wilkinson Power Splitter that operates from 10 to 40 GHz. It can handle an input power of up to 34 dBm, provides an isolation of up to 23 dBm and has an insertion loss of less than 2 dB. This power splitter is designed for space-constrained microwave signal distribution applications and can also be used as a combiner. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE/5G-NR Front-End Module for Handset and Smartphone Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58258-21 from Skyworks is a Front-End Module that supports LTE and 5G-NR bands. It consists of PA blocks, wide bandwidth filters, a MIPI standard digital control block, a single-ended filter, antenna and Tx-Rx switches, and a low noise amplifier (LNA). This module utilizes an enhanced architecture and meets the spectral linearity requirements of CP-OFDM and DFTS-OFDM modulations with up to 100 MHz bandwidth and up to 273 resource block allocations. |
| |
Download Datasheet
Product Details | |
|
|
|
| 16x64 Non-Blocking Solid-State Switch Matrix from 20 MHz to 6 GHz | |
RF Distribution System
from Mu-Del Electronics
|
| The 16MDMS-2600-64NB/49 from Mu-Del Electronics is a 16x64 Non-Blocking Solid-State Switch Matrix that operates from 20 MHz to 6 GHz. It has 16 inputs and 64 outputs and provides more than 45 dB of isolation. This switch matrix has a touch screen and remote interfacing is designed for top performance and versatility and offers outstanding features and benefits for a wide range of applications. |
| |
Product Details | |
|
|
|
|
|
|
|
|
| Hermetically Sealed Super Heterodyne Receiver from 0.5 to 18 GHz | |
Integrated Microwave Assembly
from Elbit Systems
|
| The Super Heterodyne Receiver (SHR) from Elbit Systems operates from 0.5 to 18 GHz. This hermetically sealed receiver is ideal for EW Applications. It has a triple down-conversion dynamic range from -70 to 0 dBm, a switching speed of 250 ns and phase tracking (pairs) of ±4°. This receiver has a noise figure of 17 dB and spurious levels of 45 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 dB Directional Coupler from 380 to 960 MHz | |
Directional Coupler
from MECA
|
| The 715-40-0.670 from MECA is a Directional Coupler that operates from 380 to 960 MHz. This 40 dB coupler provides a directivity of more than 25 dB and has an insertion loss of less than 0.1 dB. It can handle an average input power of 500 W, a peak input power of up to 10 kW, and has a VSWR of less than 1.15:1. The coupler is available in an Aluminum housing that measures 6.08 x 1.50 x 0.88 inches with N-type (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Passive Gain Equalizer from DC to 40 GHz | |
Gain Equalizer
from Quantic PMI (Planar Monolithics)
|
| The EQL-DC40-20-292FF from Quantic PMI (Planar Monolithics) is a Passive Gain Equalizer that operates from DC to 40 GHz. It has a slope of up to 0.5 dB/GHz, an insertion loss of 20 dB, and an amplitude accuracy of ±1 dB. This equalizer can handle an input power of up to 1 W (~30 dBm) and has a VSWR of 1.6:1. It allows both forward and reverse power measurements to be equivalent. |
| |
Download Datasheet
Product Details | |
|
|
|
| 75-Ohm 1:1 Surface-Mount Transformer from 45 to 2000 MHz | |
Balun
from MiniRF
|
| The MRFXF0089 from MiniRF is an RF Transformer that operates from 45 to 2000 MHz. It has an impedance ratio of 1:1 and an insertion loss of 0.5 dB. This 75-ohm transformer has an amplitude balance of 1.2 dB and a phase balance of less than 10°. It is designed for applications that require small, low cost, and highly reliable surface-mount components and has a welded wire construction for increased reliability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Wi-Fi + Bluetooth 5.0 LE Radio Module | |
RF Module
from Wurth Elektronik
|
| The Stephano-I from Würth Elektronik is a 2.4 GHz Wi-Fi + Bluetooth LE Module. It supports Bluetooth Low Energy 5.0 and IEEE 802.11 b/g/n Wi-Fi protocols. This module delivers a bit rate of up to 150 Mbps (Wi-Fi) and 2 Mbps (Bluetooth) and has a line-of-sight range of 450 m (Wi-Fi) and 300 m (Bluetooth). It is based on a 160 MHz Espressif ESP32-C3FH4 radio chipset and has a 32-bit RISC-V single-core processor. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 W, 3-Way Power Divider/Combiner from 0.5 to 8 GHz | |
Power Divider
from ChengDu Leader Microwave Technology
|
| The LPD-0.5/26.5-3S from Leader Microwave is a 3-way Power Divider/Combiner that operates from 0.5 to 26.5 GHz. It can handle an input power of up to 20 W, provides more than 17 dB of isolation, and has an insertion loss of less than 2.7 dB. This power divider/combiner has a VSWR of 1.60:1, an amplitude balance of ±0.7 dB, and a phase balance of less than ±7°. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged Intelligent RF Receiver from 9 kHz to 40 GHz | |
RF Monitoring Receiver
from CRFS
|
| The RFeye Node 100-40 from CRFS is a portable and rugged high-performance RF sensor for real-time 24/7 spectrum monitoring and geolocation of transmitters up to 40 GHz. It operates from 9 kHz - 40 GHz frequency range and has a 100 MHz instantaneous bandwidth. The RFeye 100-40 enables operators to monitor higher frequencies with advanced signal intercept by incorporating the latest superheterodyne receiver technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| SATCOM Antenna from 17.7 to 31 GHz with Anti-Jam Capabilities | |
SATCOM Antenna
from ThinKom
|
| The ThinAir GT 1717 from ThinKom is a SATCOM Antenna that operates from 17.7 to 21.2 GHz (Rx) and 27.5 to 31 GHz (Tx). It has been developed to operate on commercial and government networks, including LEO, MEO, GEO, and HEO constellations. This antenna ensures a low probability of intercept/detection and features inherent anti-jam robustness to operate in demanding EMI, EMC, and EMP environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Omnidirectional SMT Cellular/GNSS Antenna from 698 to 2690 MHz | |
Antenna
from Taoglas
|
| The PCS.50.A from Taoglas is a Cellular and GNSS Antenna that operates from 698 to 960 MHz, 1559 to 1610 MHz and 1710 to 2690 MHz. It is designed specifically for IoT devices with small ground planes and combines aperture tuning and active switching technologies. This linearly polarized antenna has an omnidirectional radiation pattern and provides a peak gain of -7.79 dB with an efficiency of up to 67%. |
| |
Download Datasheet
Product Details | |
|
