| New RF and Microwave Products this Week . |
|
|
| 6 dB Fixed Attenuator from DC to 110 GHz | |
Fixed Attenuator
from HYPERLABS
|
| The HL9429 from Hyperlabs is a Fixed Attenuator that operates from DC to 110 GHz. It provides an attenuation of 6 dB with an accuracy of ±1 dB. This ultra-broadband attenuator can handle a maximum input power of 24 dBm, has an amplitude match of ±0.5 dB, and a phase match of 5°. It is available in a module that measures 1.141 x 0.377 x 0.377 inches with 1.0 mm female/male connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Modular THz Signal Frequency Extender from 470 to 540 GHz | |
Signal Generator Extender
from ACST GmbH
|
| The 1215B-AL from ACST GmbH is a THz Signal Frequency Extender that operates from 470 to 540 GHz (multiplication factor of 36). It requires input frequencies from 13.05 to 15 GHz and provides a THz output with a power of up to 10 mW. This frequency extender has a modular design that allows users to have access to more than one band by combining multiple standard extenders. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 300 W Solid State Power Amplifier from 0.8 to 2.5 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2025A from Exodus Advanced Communications is a Solid State Power Amplifier that operates from 0.8 to 2.5 GHz. It delivers a saturated output power of over 300 W (CW or pulse) with a power gain of over 55 dB and 20 dB of gain adjustment. This amplifier has a Class A/AB linear design and built-in protection circuits with extensive monitoring for Forward/Reflected power, VSWR, as well as voltage, current & temperature sensing for optimum reliability & ruggedness. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 10 Port Vector Network Analyzer from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SN5090-10 from Copper Mountain Technologies is a 10-Port Vector Network Analyzer that operates from 300 kHz to 9 GHz. This VNA is an organic extension of the Compact VNA solutions offered by CMT. It enables the full complexity of VNA measurements, a streamlined calibration process, and reduced test times. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Advanced Test Equipment Corporation | | | |
|
|
| RF Analog Signal Generators from 9 kHz to 6 GHz | |
Signal Generator
from Keysight Technologies
|
| The N5171B EXG X-Series from Keysight Technologies are RF Analog Signal Generators with a frequency range from 9 kHz to 6 GHz. They provide a sine, square, triangle and positive/negative ramp waveform with an SSB phase noise of -133 dBc/Hz (at 20 kHz offset) and a frequency resolution of 0.001 Hz. These signal generators can perform basic parametric testing of components and functional verification of receivers with industry-leading output power. |
| |
Download Datasheet
Product Details | |
|
|
|
| Non-PLL Based Signal Generator from 10 MHz to 3 GHz | |
Signal Generator
from Boonton
|
| The SGX1003 from Boonton is an RF Signal Generator that operates from 10 MHz to 3.072 GHz. It has an output power range from -50 to +18 dBm and a switching speed of 200 µs. The generator has a phase noise of -116 dBc/Hz at 6 GHz (10 kHz offset) and a jitter of less than 100 fs. It utilizes a unique non-PLL (phase-locked loop) design with a digital front-end and direct, proprietary back end. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 50-Ohm RF Balun with 180° Phase Shift from 100 kHz to 67 GHz | |
Balun
from Qualwave
|
| The QBAL-100K-67000 from Qualwave is an RF Balun that operates from 100 kHz to 67 GHz. This 50-ohm balun has an insertion loss of less than 10.8 dB and provides a nominal phase shift of 180°. It has an amplitude balance of ±1 dB and a phase balance of ±6.5°. This balun can handle an input power of up to 1 W, has a common mode rejection of more than 28 dB and a group delay of 286 ps. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable I/Q Spectrum Recording System from 9 kHz to 8/18/40 GHz | |
RF Spectrum Recording and Playback System
from CRFS
|
| The RFeye® SenS Portable is a Lightweight I/Q Recorder for high-fidelity, long-duration RF recording and signal extraction from 9 kHz to 8/18/40 GHz. This recorder has a real-time bandwidth of 100 MHz and can store up to 12 hours of spectrum recordings in its internal 25.6 TB SSD. It can capture hours of lab-quality signal data without the bulky lab equipment. |
| |
Download Datasheet
Product Details | |
|
|
|
| SOSA-Aligned Multi-Channel SDR Tuner from 400 MHz to 18 GHz | |
Software Defined Radio
from Epiq Solutions
|
| The Sidekiq™ VPX410 from Epiq Solutions is a Multi-Channel Software Defined Radio (SDR) Tuner Solution that operates from 400 MHz to 18 GHz with an instantaneous bandwidth of up to 1 GHz. It combines four RF receive tuners with one RF transmit tuner to access more RF spectrum and supports both phase coherent operation and independently tunable operation. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Advanced Test Equipment Corporation | | |
|
|
|
|
|
|
|
|
|
|
|
|
| Rugged 100 W Quadraplexer from 2 to 6 GHz | |
Quadplexer
from 3H Communication Systems
|
| The XCCQ101-124 from 3H Communication Systems is a Quadraplexer that operates from 2 to 6 GHz. It has passbands of 2.0 to 2.7 GHz, 3.0 to 3.9 GHz, 4.2 to 4.95 GHz and 5.25 to 6 GHz. This quadruplex has a passband insertion loss of less than 1.5 dB and provides a rejection of more than 110 dB outside the passbands. It can handle an input power of up to 100 W, has a VSWR of 1.7:1 and a group delay variation of 6 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Front-End RFIC for Wireless IoT Applications | |
Front End Module
from BeRex, Inc.
|
| The 8TR8217 from Berex is a 2.4 GHz Multi-Function Smart Front-End RFIC that is designed for 802.15.4 Zigbee/Thread, Bluetooth smart, and proprietary ISM wireless protocols. This RFIC consists of a transmit power amplifier (PA), a receive low noise amplifier (LNA), and a single pole double throw (SPDT) transmit/receive switch in a single compact package. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Front-End Module for NB-IoT and Cat-M1 Applications | |
Front End Module
from Qorvo
|
| The QM55003 from Qorvo is an RF Front-End (RFFE) Module for NB-IoT and Cat-M1 applications. This multi-band, multi-chip module supports low-band (663 to 915 MHz) and mid-band (1695 to 1980 MHz) operations. It has an integrated harmonic rejection LPF, antenna switch, and auxillary TX/RX paths. The band select and bias are programmed through a Mobile Industry Processor Interface (MIPI). |
| |
Download Datasheet
Product Details | |
|
|
|
| InP/GaAs Low-Noise Amplifier from 2 to 4.5 GHz for Cryogenic Applications | |
RF Amplifier
from TTI
|
| The TTI-S-CLNA-0204-A from TTI is a Cryogenic Low-Noise Amplifier (LNA) that operates from 2 to 4.5 GHz. It provides a gain of over 28 dB with a noise temperature of less than 3 K (at 12 K). This LNA can withstand extremely low temperatures of 4 to 15 K and is developed with a combination of Indium Phosphide (InP) and Gallium Arsenide (GaAs) technologies to deliver excellent noise temperature (NT). |
| |
Download Datasheet
Product Details | |
|
|
|
| Low power SiP with integrated LTE-M/NB-IoT and DECT NR+ modem, and GNSS | |
Cellular Module
from Nordic Semiconductor
|
| The nRF9161 from Nordic Semiconductor is a highly integrated System-in-Package (SiP) solution, specifically designed for cellular IoT and DECT NR+ applications. It leverages low-power LTE technology, advanced processing capabilities, and robust security features, to provide unparalleled performance and versatility. It supports 3GPP release 14 LTE-M/NB-IoT and DECT NR+. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5 GHz Wi-Fi 6 + Bluetooth 5.3 (LE) Module | |
RF Module
from Panasonic Industry Europe
|
| The PAN9019 from Panasonic is a 2.4/5 GHz Wi-Fi 6 Companion Module with integrated Bluetooth 5.3 BDR/EDR/Low Energy (LE) support. It has a channel bandwidth of 20, 40 and 80 MHz and supports 802.11e Quality of Service for multimedia applications. The independent operation of the two standards enables 802.11ax data rates with High Efficiency (HE) and low-power operation (Bluetooth LE). |
| |
Download Datasheet
Product Details | |
|
|
|
| 8-Channel Cryogenic Cable Assembly from DC to 40 GHz | |
RF Cable Assembly
from IntelliConnect
|
| The C427-ZZZ-100G from IntelliConnect is an 8-Channel cryogenic cable assembly that operates from DC to 40 GHz. It has standard SMPM (male/plug) straight connectors on one end and standard SMPM (female/jack) straight connectors on the other end. This assembly utilizes 0.047 semi-rigid cables and is ideal for quantum computing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| UWB Laser Direct Structuring (LDS) Antenna from 6 to 8.5 GHz | |
Antenna
from KYOCERA AVX
|
| The 9002305L0-L01K from KYOCERA AVX is a Surface-Mount UWB Antenna that operates from 6 to 8.5 GHz. It is manufactured using Laser Direct Structuring (LDS) technology, which offers a streamlined and efficient process for creating complex 3D circuits on a myriad of substrates. This antenna is characterized by its phase stability, which remains the same in all directions around the antenna. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Linearity SPDT MEMS Switch from DC to 34 GHz | |
RF Switch
from Analog Devices
|
| The ADGM1001 from Analog Devices is an SPDT MEMS Switch that operates from DC to 34 GHz. It provides 32 dB of isolation, has a switching time (ON/OFF) of 200 µs, and a power-up time of 4 ms. This switch can handle an input power of up to 33 dBm and has an insertion loss of less than 1.5 dB. It is fabricated using Analog Devices’ micro-electromechanical system (MEMS) switch technology which enables a small form factor, wide RF bandwidth, highly linear, and low insertion loss that is operational down to DC. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged SATCOM On-The-Move Terminal from 7.25 to 31 GHz | |
SATCOM Terminal
from General Dynamics Mission Systems
|
| The M20-20M from General Dynamics Mission Systems is a SATCOM On-The-Move Terminal. It operates from 10.95 to 14.5 GHz (Ku-band), 20.20 to 31 GHz (Ka-MIL) and 7.25 to 8.4 GHz (X-band). This terminal has been specifically designed for ground vehicle command, control & communications (C3) missions where beyond line of sight (BLOS) SATCOM capabilities are mission critical. |
| |
Download Datasheet
Product Details | |
|
