| Featured Products this Week . |
|
|
| 250 W Class A/AB Solid-State Power Amplifier from 2 to 8 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2085E-1LC from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 2 to 8 GHz. It delivers a CW/Pulsed saturated output power of more than 250 W with more than 54 dB of gain and a gain adjustment range of 20 dB. This SSPA is based on a Class A/AB linear design delivering high power over an instantaneous S/C-band bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 4-Way Power Divider/Combiner from 0.5 to 8 GHz | |
Power Divider
from MECA
|
| The 804-4-4.250 from MECA is a 4-Way Power Divider/Combiner that operates from 0.5 to 8 GHz. It can handle an input power of up to 30 W, provides more than 16 dB of isolation and has an insertion loss of less than 2.8 dB. This power divider/combiner has a VSWR of 1.20:1, an amplitude balance of ±0.6 dB and a phase balance of less than ±12°. |
| |
Download Datasheet
Product Details | |
|
|
|
| High Q Square Air Core Inductors from 27 to 47 nH | |
RF Inductor
from Coilcraft
|
| The 111SQ from Coilcraft is a Square Air Core Inductors series with exceptionally high quality factors up to 200 at 400 MHz. They are available in inductance values from 27 to 47 uH and have an SRF of between 2.2 and 2.6 GHz. The inductors have solder-coated leads to ensure excellent solderability and have a flat top and bottom for easy placement via pick and place machines. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-band Tx-Rx Front-End Module for 2G/3G/4G (LTE-A) Applications | |
Front End Module
from Skyworks Solutions
|
| The SkyOne® SKY78191-21 from Skyworks is a Low-band Tx-Rx Front-End Module for 2G/3G/4G mobile devices. It consists of a low-band 3G/4G PA block, low- and high-band 2G PA blocks, a silicon controller containing the MIPI RFFE interface, RF band switches, antenna switches, a bi-directional coupler, and integrated filters for Bands 8, 12, 20 and 26. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 400° Analog Phase Shifter from 5 to 18 GHz | |
Analog Phase Shifter
from Analog Devices
|
| The HMC247 from Analog Devices is a 400° Analog Phase Shifter die that operates from 5 to 18 GHz. The phase shift is controlled via an analog control voltage from 0 to +10V. The device provides a continuously variable phase shift from 0 to 300 degrees at 9 GHz, and 0 to 100 degrees at 18 GHz, with consistent insertion loss versus phase shift. |
| |
Download Datasheet
Product Details | |
|
|
|
| Reflective SP5T Switch from 2 to 18 GHz | |
RF Switch
from Quantic PMI (Planar Monolithics)
|
| The P5T-218-60-R-25DBM-SFF from Quantic PMI is a Reflective SP4T Switch that operates from 2 to 18 GHz. It has a switching speed of less than 100 ns and provides an isolation of 60 dB. This switch can handle a CW input power of up to 25 dBm and has an insertion loss of 3.2 dB. It is available in a radial module that measures 0.97 (Dia.) x 0.37 (H) inches with SMA-female connectors and requires a DC supply of +5 and -15 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged 4-Channel High-Power Radio from 2.2 to 2.5 GHz | |
Data Link
from Triad RF Systems
|
| The THPR1055 from Triad RF Systems is a 4-channel High-Power Radio that operates from 2200 to 2500 MHz. It combines Silvus Streamcaster SC4410-235-O OEM form-factor radio with Triad’s high-power RF subsystems in a low SwaP package. This radio consists of RF components such as bidirectional amplifiers (BDAs), RF filtering, and control circuitry to achieve higher RF output power, greater throughput, and greater link distances than standalone radios. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5.9 GHz XBAW Filter for Automotive/C-V2X Applications | |
Band Pass Filter
from Akoustis
|
| The A10159 from Akoustis is a 5.9 GHz XBAW Filter that meets the coexistence requirements for C-V2X and DSRC standards. It is designed to enable coexistence with Wi-Fi and 5G bands. This filter has low passband insertion loss and enables high-power handling capabilities that establish long-range connectivity for modern wireless communication applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 W X-Band GaN Pulsed Solid State Power Amplifier | |
RF Amplifier
from Diamond Microwave
|
| The DM-X400-02 from Diamond Microwave is an X-band GaN pulsed solid-state power amplifier that operates from 8200 MHz to 9500 MHz. It delivers an output power of 400 Watt. The PA has a pulse width up to 100 µs and a duty cycle up to 15% with a rise/fall time below 50 ns. It is available in a module that measures 150 x 220 x 41 mm with N-type female connector and is ideal for use in demanding defence, aerospace and communications applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 71 to 76 GHz and 81 to 86 GHz E-Band Mixer with Integrated LO | |
RF Mixer
from Spacek Labs
|
| The M80-5X2B from Spacek is an E-band mixer covering the two radio bands of 71 to 76 GHz and 81 to 86 GHz. The mixer includes an integrated LO doubler with which the device only requires an input signal of 39 GHz. This mixer can also be supplied with a phase-locked-source. It has a conversion loss of 6-10 dB, an IF Frequency of 2 to 8 GHz and input P1dB of -6 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| True RMS Waveguide Power Sensor from 50 to 75 GHz | |
RF Power Meter & Sensor
from LadyBug Technologies
|
| The LB5975W from LadyBug Technologies is a True RMS Power Sensor that operates from 50 to 75 GHz. It has a dynamic range from -50 dBm to +18 dBm and provides accurate power measurements of up to +18 dBm or 63 mW (continuous/pulsed) on any modulated signal with any modulation type. This power sensor can measure up to 384 samples per measurement and has a measurement time of less than 38.4 ms per average. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Portable Direction Finding and Spectrum Monitoring System from 500 MHz to 8 GHz | |
Direction Finding System
from CRFS
|
| The RFeye Array 125 from CRFS is a fully integrated, multi-mission direction-finding system for fixed, vehicle, or transportable applications with simultaneous DF, monitoring, and geolocation capability. It operates from 500 MHz to 8 GHz with 100 MHz of Instantaneous bandwidth. This is a fully integrated plug-and-play system containing a high-performance RFeye Node, spiral antenna modules, and high-speed switch and is available with an optional IP65 radome and mounting kit. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bench-Top RF Shield Box from 20 MHz to 12 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-1970-C from RF Electronics is an RF Shield Box for the frequency range from 20 MHz to 12 GHz. It has a thick RF-absorbing foam that deadens standing waves and reflections to provide more than 130 dB of isolation (at 20 MHz – 1 GHz). The test box has shielded power filters for powering devices placed inside the box while blocking all wireless signals. It is designed and developed for WLAN, and wireless device testing. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Modular Software-Defined Radio Platform from 70 MHz to 6 GHz | |
Software Defined Radio
from Alén Space
|
| The TREVO from Alen Space is a Modular Software Defined Radio Platform that operates from 70 MHz to 6 GHz. It employs SoCs based on the Zynq UltraScale+ family and multi-core processing and FPGA flexibility. This SDR platform’s motherboard can handle different numbers of SoC and transceivers, integrating in a single subsystem all the radio chain and processing units to support the most demanding satellite software applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ka/Ku-Band, Integrated and Portable SATCOM-on-the-Move Terminal | |
SATCOM Terminal
from Get SAT Ltd
|
| The MICRO SAT LW from Get SAT is a Portable On-the-move SATCOM Terminal that is suitable for use in unmanned aerial vehicles (UAVs). It operates in the Ku-band from 10.7 to 12.75 GHz (Rx)/12.75 to 14.5 GHz (Tx) or in the Ka-band from 17.5 to 21.2 GHz (Rx)/27.5 to 31 GHz (Tx). This terminal has an integrated modem, Antenna Control Unit (ACU), BUC (Block Up Converter), tracking sensors, LNB (Low Noise Block) downconverter and a full RF front end. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 Gbps Point-to-Point FDD Microwave Link 71 to 86 GHz | |
Microwave Backhaul Radio Links
from RACOM
|
| The RAy3-80 from RACOM is a Point-to-Point (PtP) Microwave Link that operates in the E-band from 71 to 86 GHz. It supports channel bandwidths of up to 2000 MHz and delivers a data rate of up to 10 Gbps (in each direction). This microwave link supports FDD duplex traffic with flexible duplex spacing and 2PSK, 4PSK, 8PSK, 16QAM, 32QAM, 64QAM, and 128QAM modulation schemes. |
| |
Download Datasheet
Product Details | |
|
