| New RF and Microwave Products this Week . |
|
|
|
|
|
|
|
| 4-Port USB Controlled Antenna Switch from 100 kHz to 44 GHz | |
RF Switch
from Signal Hound
|
| The RFS44 from Signal Hound is a 4-port antenna switch (SP4T) that operates from 100 kHz to 44 GHz. This absorptive USB controlled solid-state switch has ultra-fast switching speed of 20 ns with a rise/fall time of 3 ns. It is based on silicon-on-insulator (SOI) technology and can switch from LF all the way through the Ka-band and can also be used for pseudo-doppler direction-finding applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Surface-Mount Low-Noise Amplifier from 2 to 30 GHz | |
RF Amplifier
from Marki Microwave
|
| The ADM-8006PSM from Marki Microwave is a Low-Noise Amplifier (LNA) that operates from 2 to 30 GHz. It delivers a saturated output power of 23 dBm with a small signal gain of 23 dB and has a noise figure of 2.7 dB. This high-linearity LNA requires a DC supply of 5 V and consumes less than 259 mA of current. It requires no negative bias or bias sequencing and no external bias tee. |
| |
Download Datasheet
Product Details | |
|
|
|
| Block Up Converter Power Amplifiers from 28.5 to 29.5 GHz | |
Block Up Converter
from EM Research
|
| The BUCPA Series from EM Research are Block Up Converter Power Amplifiers that convert input frequencies from 1 – 2 GHz to output frequencies (RF) from 28.5 – 29.5 GHz. They deliver an output power of 10 W (~40 dBm) with a gain of 62 dB. These converters have spurious levels of less than -60 dBc and phase noise of -77 dBc/Hz (at 1 kHz offset). |
| |
Download Datasheet
Product Details | |
|
|
|
| Non-Terminated, Latching SPDT Switches from DC to 67 GHz | |
RF Switch
from Teledyne Relays
|
| The CCR-67V from Teledyne Defense Electronics are Non-Terminated, Latching SPDT Switches that operate from DC to 67 GHz. They have a switching time of less than 20 ms (with built-in TTL driver and decoder) and provide more than 70 dB of isolation. These electromechanical switches have an insertion loss of less than 1.10 dB and a VSWR of less than 1.90:1. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Integrated Front-End Module for 3G, 4G/LTE and 5G-NR Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58260-11 from Skyworks is a Front-End Module for 5GNR, LTE, WCDMA, and CDMA applications. It consists of power amplifier (PA) blocks, single-ended duplexers, antenna, band select switches, and low noise amplifier (LNA). This module uses an enhanced architecture to cover multiple bands and meet the spectral linearity requirements of LTE QPSK, 16QAM, 64QAM, 256QAM modulations, and up to 100 resource block allocations. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3GPP Rel-17 5G RedCap Modules with Integrated L1+L5 Band GNSS | |
Cellular Module
from Quectel
|
| The RG255C Series from Quectel are 5G RedCap Modules based on 3GPP Release 17 RedCap technology. They support 5G standalone (SA) modes and are backward-compatible with the 4G network. These modules support a theoretical peak data rate of 150 Mbps (downlink) and 50 Mbps (uplink), while also supporting advanced 5G features such as URLLC and power saving. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ku-Band Low Noise Block from 11.7 to 12.2 GHz | |
Low Noise Block
from Norsat
|
| The 2008XSAF from Norsat is a Low Noise Block (LNB) that converts input frequencies (RF) from 11.7-12.2 GHz to output frequencies (IF) from 950-1450 MHz. It provides an output P1dB of more than +5 dBm with a conversion gain of 60 dB and has a LO stability of ±25 kHz. This PLL LNB has a phase noise of -93 dBc/Hz (at 100 kHz offset) and a noise figure of less than 1 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bandpass Filter Die with Passband from 12 to 18 GHz | |
Band Pass Filter
from AmpliTech
|
| The AGBPF150 from AmpliTech is a Bandpass Filter (BPF) with a passband from 12 to 18 GHz. It has a center frequency of 15 GHz, a passband insertion loss of 0.99 dB and provides a rejection of 20 dB (at 8.7 and 23.7 GHz). This BPF is available as a die that measures 1.00 x 0.75 x 0.10 mm with 50-ohm matched DC-blocked RF ports. |
| |
Download Datasheet
Product Details | |
|
|
|
| 300 W Solid State Power Amplifier from 0.8 to 2.5 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2025A from Exodus Advanced Communications is a Solid State Power Amplifier that operates from 0.8 to 2.5 GHz. It delivers a saturated output power of over 300 W (CW or pulse) with a power gain of over 55 dB and 20 dB of gain adjustment. It is available in a 4U package that measures 430 x 177 x 560 mm and has N-female connectors. This amplifier is ideal for EMI/RFI, lab, CW/Pulse and all communication applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 kW GaN Pulsed Solid-State Power Amplifier from 1 to 2 GHz | |
RF Amplifier
from Advanced Amplifiers
|
| The AA-12G-2KWP from Advanced Amplifiers is a Pulsed Solid-State Power Amplifier (SSPA) that operates from 1 to 2 GHz. It delivers a peak output power of more than 2 kW with a gain of over 63 dB and has a pulse width of up to 100 µs (duty cycle – 10%). This SSPA is based on a Class AB linear GaN design that is suitable for high-power pulse applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| Automated Radio Communication Test System from 9 kHz to 6 GHz | |
RF Test Set
from Viavi Solutions
|
| The CX700 ComXpert from VIAVI Solutions is an Automated Radio Communications Test System that operates from 9 kHz to 6 GHz. It is the latest generation of innovative tactical radio test instruments from VIAVI that is designed for commercial, tactical, military, and infrastructure applications in production, depot-level, and field environments. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Rugged, Surface Mount Broadband Conical Inductors | |
RF Inductor
from Coilcraft
|
| The BCR Series are conical inductors available in nine inductance values ranging from 0.22 to 8.0 uH. They have been designed specifically for broadband and high-frequency applications from 10 MHz to 40 GHz. The inductors are ideal for use in ultra-wideband bias tees, where the conical inductor provides the path for the DC bias injection or extraction while isolating the power source from the active device. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface-mount Circulators from 290 MHz to 15 GHz | |
RF & Microwave Circulator
from UIY Inc.
|
| The Surface Mount Circulators from UIY operate from 290 MHz to 15 GHz. They have an insertion loss of below 0.6 dB, isolation of over 18 dB, and can handle up to 200 watts of forward power. These circulators are available in a module with SMT connectors as standard products and can also be ordered as a custom module. They are suitable for Military, Space & Commercial applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE-Advanced Base Station Simulator/Signal Tester | |
RF Test Set
from Anritsu
|
| The MD8430A is a signaling tester for LTE-Advanced chipsets. It has been designed for early chipset and UE development, function tests, and performance tests ranging from carrier acceptance to protocol conformance tests. It also supports fault operation tests, which are difficult to perform in connection with live base stations. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.5 kW LDMOS Power Transistor from 1 to 400 MHz | |
RF Transistor
from Ampleon
|
| The ART2K5TFUS from Amphenol is an LDMOS Power Transistor that operates from 1 to 400 MHz. It delivers an output power of 2.5 kW with a gain of 29.5 dB and has a drain efficiency of 76%. This transistor has an integrated thermal sensor and dual-sided ESD protection that enables class-C operation and complete switch-off of the transistor. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Way Power Divider/Combiner from 1 to 18 GHz | |
Power Divider
from JFW Industries
|
| The 50PD-903 SMA from JFW Industries is a 4-way Power Divider/Combiner that operates from 1 to 18 GHz. It can handle an RF input power of 5 W (divider ports) and 0.25 W (combiner ports), provides more than 20 dB of isolation and has an insertion loss of 2.1 dB. This power divider/combiner has amplitude tracking of ±0.4 dB and a phase tracking of ±5°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 dB Directional Coupler from 0.4 to 7.125 GHz | |
Directional Coupler
from KRYTAR
|
| The 10040712530 from KRYTAR is a Directional Coupler that operates from 0.4 to 7.125 GHz. This 30 dB coupler provides a directivity of more than 15 dB and has a frequency sensitivity of ±1.2 dB. It can handle an input power of 20 W, has an insertion loss of less than 0.8 dB and a VSWR of 1.35:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Absorptive SP10T PIN Diode Switch from 8 to 13 GHz | |
RF Switch
from G.T. Microwave, Inc.
|
| The S9P-65-0BM from G.T. Microwave is an Absorptive SP10T PIN Diode Switch that operates from 8 to 13 GHz. It has a switching speed of less than 10 µs (with 10-bit TTL compatible logic) and provides more than 80 dB of isolation. This switch can handle a CW input power of up to 1 W, has an insertion loss of less than 5.5 dB and a VSWR of better than 1.75:1. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 39 dBm GaN MMIC Power Amplifier from 2 to 18 GHz | |
RF Amplifier
from AMCOM Communications, Inc.
|
| The AM02018039WN-SN-R from AMCOM Communications is a GaN MMIC Power Amplifier that operates from 2 to 18 GHz. The amplifier provides a saturated output power of 39 dBm, P1dB of 34 dBm and a small signal gain of 20 dB. It requires a 28 V DC supply and consumes less than 1300 mA of current.The amplifier is available in a RoHS compliant ceramic package with a flange and straight RF and DC leads for drop-in assembly. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 W Single-Junction Cryogenic Isolator from 4 to 12 GHz | |
RF & Microwave Isolator
from Low Noise Factory
|
| The LNF-ISC4_12B from Low Noise Factory is a Single-Junction Cryogenic Isolator that operates from 4 to 12 GHz. It has an insertion loss of 0.3 dB with an isolation of 20 dB. This Isolator can handle an input power of up to 1 W (~30 dBm). It has been designed to meet the strict requirements of ultra-low temperature physics research and has a gold-plated OFHC copper body to ensure minimum loss. |
| |
Download Datasheet
Product Details | |
|
|
|
| Fixed Attenuators (1 to 6 dB) from DC to 6 GHz | |
Fixed Attenuator
from Fairview Microwave
|
| The FMAT7520-x Series from Fairview Microwave are Fixed Attenuators that operate from DC to 6 GHz. They are available in attenuation values of 1, 2, 3 and 6 dB and are ideal for reducing the power levels of a signal by a fixed amount with little or no reflections. These passive attenuators can handle an input power of up to 2 W and have a VSWR of less than 1.3:1. |
| |
Download Datasheet
Product Details | |
|
