| New RF and Microwave Products this Week . |
|
|
|
|
|
|
|
| 100 W GaN Power Amplifier from 1 to 2 GHz | |
RF Amplifier
from RFHIC
|
| The RWP1020100-53 from RFHIC is a Power Amplifier that operates from 1 to 2 GHz. It delivers an output power of 100 W (50 dBm) with a power gain of 53.8 dB. This power amplifier is based on GaN-on-SiC technology and provides improved thermal handling using a patented technology. It requires a DC supply of 36 V and consumes less than 2 A of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Reflective Silicon SPDT Switch from 8 to 11 GHz | |
RF Switch
from Analog Devices
|
| The ADRF5142 from Analog Devices is a Silicon SPDT Switch that operates from 8 to 11 GHz. It has a switching speed of 60 ns and provides an isolation of 40 dB. This reflective switch can handle an input power of 10 W (~41 dBm) and has an insertion loss of 1.2 dB. It has a rise/fall time of 40 ns and a settling time of 65 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| Absorptive CMOS SP4T Switch from 10 kHz to 18 GHz | |
RF Switch
from Withwave
|
| The WS418NKU from Withwave is an Absorptive SP4T Switch that operates from 10 kHz to 18 GHz. It can handle an input power of 1.58 W (~32 dBm), provides an isolation of more than 26 dB, and has an insertion loss of 5.5 dB. This switch is based on CMOS Silicon-on-Insulator (SOI) technology that offers broadband operation and fast settling times. |
| |
Download Datasheet
Product Details | |
|
|
|
| Integrated 2.4 GHz Wi-Fi 7 Front-End Module for IoT Applications | |
Front End Module
from Qorvo
|
| The QPF4257 from Qorvo is a 2.4 GHz Wi-Fi 7 Front-End Module (FEM). It consists of a 2.4 GHz power amplifier (PA), a single pole double throw (SPDT) switch, a bypassable low noise amplifier (LNA), RF coupler, and a DC logarithmic power detector in a single package. The performance of this FEM is focused on optimizing the PA for a supply voltage of 5 V that conserves power consumption while maintaining high linear output power and edge throughput. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Wi-Fi 6 + Bluetooth 5.4 LE Combo IC for IoT Applications | |
Wireless Chipset
from Infineon Technologies
|
| The AIROC CYW55511 from Infineon Technologies is a Single-Band 2.4 GHz Wi-Fi 6 + Bluetooth Low Energy 5.4 Combo IC. This integrated, power-efficient and cost-effective design offers a balance of advanced Wi-Fi 6 and Bluetooth/BLE features with performance and power savings. It has a 192 MHz Cortex M33 core processor and supports OFDMA, MU-MIMO, TWT, BSS Coloring and DCM technologies. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| 40 GHz Benchtop Power Meter with Four USB Controlled Power Sensors | |
RF Power Meter & Sensor
from Boonton
|
| The PMX40 from Boonton is an RF Power Meter that operates from 4 kHz to 40 GHz. Its intuitive, multi-touch display enables fast configuration of up to four USB sensors as well as easy access to measurement and analysis tools, providing a standalone solution for capturing, displaying, and analyzing peak and average RF power in both the time and statistical domains. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Sponsored by DigiKey | | u-blox MAYA-W2 Series Modules | | Using 20 MHz, 40 MHz, or 80 MHz channels, the modules can work as access points, stations, in P2P connections, or any combination. MAYA-W2 supports Bluetooth® Low Energy 5.3, including using isochronous channels for LE Audio. Click here to learn more. | | | |
|
|
| GaAs pHEMT Low Noise Amplifier MMIC from 0.4 to 8 GHz | |
RF Amplifier
from Mini Circuits
|
| The TSY-83LN+ from Mini-Circuits is a GaAs pHEMT Low Noise Amplifier MMIC that operates from 0.4 to 8 GHz. It provides a gain of up to 23 dB with a noise figure of less than 2.5 dB and has a P1dB output power of up to +22.9 dBm. This LNA MMIC is bypass mode capable and suitable for sensitive, high dynamic range receiver applications where a gain stage may need to be quickly bypassed in the presence of high-power RF signals. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 10 MHz Rubidium Oscillator for Airborne Applications | |
Rubidium Oscillator
from Safran Electronics & Defense
|
| The LPFRS/AV1 from Safran is a high-performance 10 MHz Rubidium Oscillator designed for rugged airborne applications. It has an excellent frequency retrace of ±0.05 ppb and very low temperature sensitivity. The oscillator provides a sine wave output with a phase noise of -140 dBc/Hz @ 10 kHz offset. It has spurious levels of under -80 dBc and harmonics of better than -25 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz SC-Cut Low-Phase Noise OCXOs | |
OCXO
from Abracon LLC
|
| The O-CS41 Series from Abracon are Oven Controlled Crystal Oscillators (OCXOs) that operate at 10 MHz. They provide sinewave or HCMOS/TTL output waveforms with a phase noise of -148 dBc/Hz (at 10 Hz offset) and have a frequency stability of ±5 ppb (vs. temperature). These OCXOs have a warm-up time of 3 minutes and a g-sensitivity of ±10 ppb/G. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Compact USB VNA from 9 kHz to 8.5 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The S5085 is a 2-Port Vector Network Analyzer from Copper Mountain Technologies that operates from 9 KHz to 8.5 GHz. It can measure all four S parameters S11, S12, S21, S22 and provides a wide variety of analysis capabilities, including time-domain with gating and frequency offset modes. This lab grade VNA is available in a compact package and can be controlled with a Windows or Linux based PC, laptop, tablet, or x86 board computer connected to the measurement hardware via a USB interface. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 30 V Bias Tee from 160 kHz to 110 GHz | |
Bias Tee
from HYPERLABS
|
| The HL9449 from Hyperlabs is a Bias Tee that operates from 160 kHz to 110 GHz. It has a DC breakdown voltage of up to 30 V and a breakdown current of 175 mA. The bias tee has an insertion loss of less than 2.5 dB and has a rise time of 3.2 ps. It has an amplitude match of ±0.1 dB and a phase match of ±4°. This bias tee is available in a module that measures 49.53 x 33.02 x 13.46 mm and has 1.0 mm jack/plug connector options. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12 GHz Rackmount Shielded RF Test Enclosure | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-1160-AK from RF Electronics is a 12 GHz RF Shielded Test Enclosure. It is designed for wireless device testing applications and is ideal for 802.11a/b/g/n/ac/ax/be, Bluetooth, RFID, 3G, LTE and 5G FR1 device testing. This shielded enclosure has an internal dimension of 374 x 243 x 473 mm and includes thick RF-absorbing foam that deadens standing waves and reflections. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Orbit Electronically Steerable Antennas from 10.7 to 14.5 GHz | |
Electronically Steerable Antenna
from Reticulate Micro
|
| The VALOR Series from Reticulate Micro are Electronically Steerable Antennas (ESA) that operate from 10.7 to 12.7 GHz (Rx) and 14 to 14.5 GHz (Tx). They are designed for scalability, multi-network, and multi-orbit connectivity across land mobile, airborne, UAVs, maritime and mobile or man-pack applications. These ESAs can support antenna apertures of 7.5 cm and provide a G/T of up to 11.7 dB/K with an EIRP of 66.5 dBmi. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from 1164 to 1610 MHz for GNSS Applications | |
RF Amplifier
from Nisshinbo Micro Devices Inc.
|
| The NT1195FAAE2S from Nisshinbo Micro Devices is a Low-Noise Amplifier that operates from 1164 to 1610 MHz. It provides a small signal gain of 18 dB with a noise figure of less than 1.1 dB. This amplifier requires a DC supply from 1.5 to 3.7 V and consumes less than 3.4 mA of current. It is available in a surface-mount EPFFP6-FA package that measures 1.10 x 0.70 x 0.37 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 W Single-Junction Cryogenic Circulator from 4 to 12 GHz | |
RF & Microwave Isolator
from Low Noise Factory
|
| The LNF-CIC4_12A from Low Noise Factory is a Single-Junction Cryogenic Circulator that operates from 4 to 12 GHz. It has an insertion loss of 0.3 dB with an isolation of 20 dB. This circulator can handle an input power of up to 1 W (~30 dBm). It has been designed to meet the strict requirements of ultra-low temperature physics research and has a gold-plated OFHC copper body to ensure minimum loss. |
| |
Download Datasheet
Product Details | |
|
|
|
| Handheld, Battery-Powered Microwave Analyzer from 3 kHz to 10 GHz | |
RF Spectrum Analyzer
from Keysight Technologies
|
| The FieldFox N9915C from Keysight Technologies is a Handheld Microwave Analyzer with a frequency range from 3 kHz to 10 GHz. It has a gap-free, real-time bandwidth of 120 MHz and can measure all four S-parameters simultaneously with a dynamic range of 115 dB. This analyzer has a ruggedized yet lightweight and portable battery-powered design and can perform measurements for RF devices like cables, antennas, filters, amplifiers, and signal/spectrum analysis. |
| |
Download Datasheet
Product Details | |
|
|
|
| X/S-Band Software Defined DVB-S2 Transmitter for Space Applications | |
Software Defined Radio
from Augustus Aerospace Company
|
| The S2DR HRTX from Augustus Aerospace Company is a Software Defined DVB-S2 Transmitter. It operates in the X-band from 8.025 to 8.4 GHz with optional S-band support from 2.2 to 2.3 GHz. This transmitter has symbol rates of up to 60Msym/s and supports data rates up to 267 Mbps in a 72MHz spectrum allocation. It is based on a powerful Xilinx ZYNQ 7035 SOC processor (dual ARM® 9 cores, Kintex® 7 FPGA) and has a serial flash memory capacity of 16 MB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
