| Wireless Infra New Products . |
|
|
| 1.2/1.8 GHz Dual-Output Amplifier for DOCSIS Applications | |
RF Amplifier
from Teleste
|
| The CX4 from Teleste is a Dual-Output Amplifier that is compatible with 1.8 GHz and 1.2 GHz networks. It has the versatility to be installed in 1.2 GHz networks and later be upgraded to 1.8 GHz with different split frequencies between upstream and downstream. This makes this amplifier compatible with existing DOCSIS 3.1 networks, as well as the upcoming network generations, including DOCSIS 4.0. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Dual-Band, O-RAN Compliant Backhaul Radio Link from 1710 to 2190 MHz | |
Microwave Backhaul Radio Links
from AGTGSS
|
| The Dual Band B25B66 Cell from AGTGSS is a Backhaul Radio Link that operates from 1850 to 1995 MHz (Band 25) and 1710 to 2190 MHz (Band 66). It has a bandwidth of 65 MHz in band 25 and up to 80 MHz in band 66. This 4T4R MIMO radio supports a downlink modulation of up to 1024QAM and an uplink modulation of up to 256QAM. It supports up to 6 carriers and has 4 external antennas. |
| |
Download Datasheet
Product Details | |
|
|
|
| 80 W GaN Hybrid Power Amplifier from 2110 to 2200 MHz | |
RF Amplifier
from RFHIC
|
| The SDM21007-30H from RFHIC is a Hybrid Power Amplifier that operates from 2110 to 2200 MHz. It delivers a saturated output power of 79.4 W with a power gain of 40 dB and an efficiency of 16%. This fully integrated micro-strip amplifier is based on GaN technology and is designed for applications in 4G LTE MIMO systems, small cells and low-power remote radio heads. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 W LDMOS Power Transistor from 1 to 1300 MHz | |
RF Transistor
from Polyfet RF Devices
|
| The LS2641 from Polyfet RF Devices is an LDMOS Power Transistor that operates from 1 to 1300 MHz. It delivers a saturated output power of 250 W with a power gain of more than 16 dB and has a drain efficiency of better than 60%. This transistor employs back-to-back gate diodes for enhanced ESD protection and has a high drain breakdown voltage which makes this LDMOS highly rugged. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Rohde & Schwarz | | | |
|
|
|
|
|
|
|
| Low Noise, High SFDR RF-over-Fiber Module from 1 to 67 GHz | |
RF Over Fiber Module
from RFOptic
|
| The 67GHz RF-over-Fiber Mini-L from RFOptic has a frequency range of 1 to 67 GHz. It converts wideband RF signals to an RFoF optical signal in the Tx unit and converts the received RFoF optical signal back to an RF signal in the Rx unit. For RF operation, this module has an SFDR of 112 dB/Hz, a noise figure of 27 dB, and a phase noise of -120 dBc/Hz (at 10 kHz offset). |
| |
Download Datasheet
Product Details | |
|
|
|
| E-Band mmWave Radio Link from 71 - 76 GHz and 81 - 86 GHz | |
Microwave Backhaul Radio Links
from Vubiq
|
| The HaulPass E10G from Vubiq Networks is a Millimeter Wave Radio Link that operates in the E-Band from 71 to 76 GHz and 81 to 86 GHz. It has a programmable channel bandwidth from 100 MHz to 2 GHz (baud rate, coding, and modulation programmable) with a step size of 31.25 MHz. This radio link incorporates Vubiq Networks’ patented modular integrated waveguide technology and adaptive code modulation and baud (ACMB) technology that instantly sets code rate, modulation and baud in real time, resulting in a hitless adjustment to link conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP65-Rated 3.5/5 GHz Ethernet-Powered Wireless Radio Link | |
Microwave Backhaul Radio Links
from BLiNQ Networks
|
| The FWC-133-3550 from Blinq Networks is a Category 12/13 Dual-Band Outdoor Customer Premise Equipment (CPE). It has been designed to provide connectivity to base stations in the 3.5/5 GHz bands and supports TDD-LTE bands 48, 42/43, and 46. This 3GPP Release 12-compliant radio has a built-in high gain directional antenna that allows expansion of the LTE signal coverage and an RF front-end with 2 transmitter and 4 receiver channels. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8-Port Antenna from 698-960 MHz and 1695-2690 MHz | |
Base Station Antenna
from CellMax Technologies
|
| The 12092x from CellMax is an 8-Port Antenna that operates from 698-960 MHz and 1695-2690 MHz. It delivers a gain of 17.1-18.4 dBi (698-960 MHz) and 20.2-21.4 dBi (1695-2690 MHz). This antenna has an Azimuth (3 dB) beam width of 55-75 degrees and an Azimuth beam squint of 1-3 degrees. It has an elevation (3 dB) beamwidth of 3.2-8.8 degrees and an electrical down-tilt range of 1-9 degrees. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20-Port 4x4 MIMO Base Station Antenna from 698 to 4200 MHz | |
Base Station Antenna
from Galtronics USA, Inc
|
| The GQ2420-07841-ABC from Galtronics is a 20-Port 4x4 MIMO Base Station Antenna that operates from 698 to 4200 MHz. This dual-slant ±45° polarized antenna provides a gain of up to 10.2 dBi and has a VSWR of 1.5:1. It has a horizontal beamwidth of 360°, a vertical beamwidth of 89° and an electrical down-tilt of 6°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6-Port Base Station Panel Antenna from 617 to 2690 MHz | |
Base Station Antenna
from Amphenol Antenna Solutions
|
| The APXV4ALL24-U-J20 from Amphenol Antenna Solutions is a 6-Port Base Station Panel Antenna that operates from 617-894 MHz (low-band) and 1695-2690 MHz (mid-band). This ±45° cross-polarized antenna provides a gain of 18.5 dBi and has a VSWR of 1.5:1. It has an azimuth beamwidth of 48°, an elevation beamwidth of 10.4°, and supports an electrical downtilt from 2°to 12°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Port Base Station Antenna from 698 to 3980 MHz | |
Base Station Antenna
from JMA Wireless
|
| The MX04FFP465-01 from JMA Wireless is a 4-Port Base Station Antenna that operates from 698 to 3980 MHz. This ±45° antenna provides a gain of up to 16.3 dBi and has a VSWR of less than 1.5:1. It has a horizontal beamwidth of 65°, a vertical beamwidth of 7.6° to 17° and supports electrical downtilt from 0 to 16°. This antenna has fully integrated (iRETs) with independent RET control for low-band, mid-band, and CBRS/C-Band. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-PIM Bandpass Filter with Passband from 451 to 466 MHz | |
Band Pass Filter
from Amphenol Procom
|
| The PRO-BPF 451-466-LP from Amphenol Procom is a Bandpass Filter with a passband from 451 to 466 MHz. It has a passband insertion loss of less than 1 dB with out-of-band rejection of up to 40 dB (low-band and high-band). This filter is designed to suppress high power signals, effectively mitigating interference, and elevating the performance of LTE 450 communications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12-Port Multi-Beam Base Station Antenna from 1695 to 2690 MHz | |
Base Station Antenna
from CommScope
|
| The 6V-10M-F6 from CommScope is a 12-Port Base Station Antenna that operates from 1695 to 2690 MHz. This ±45° polarized antenna provides a gain of 21.4 dBi and has a VSWR of 1.5:1. It has a horizontal beamwidth of 12°, a vertical beamwidth of 15.4°, and an electrical downtilt of 6°. This antenna provides six beams in 16-degree sectors and covers the entire mid-band. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 GHz, 7 Gbps Wi-Fi 6E Point-to-Multipoint Backhaul Radio for Dense Environment | |
Microwave Backhaul Radio Links
from Mimosa
|
| The A6 from Mimosa is a Point-to-Multipoint Backhaul Radio that operates from 5150 to 6425 MHz for Wi-Fi 6E applications. It supports 20, 40, 80, and 160 MHz channels, 8x8 multi-user MIMO, and delivers a data rate of up to 7 Gbps (UL/DL). This access point utilizes BPSK-1024QAM, OFDMA, and other PHY layer technologies to ensure sufficient AP capacity to handle large populations in dense urban/rural environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 700/800 MHz Public Safety Digital Repeater | |
RF Repeaters
from Advanced RF Technologies
|
| The PSR-78-9537-U from ADRF is a Channelized Digital Repeater that operates from 758 to 861 MHz covering 700/800 MHz public safety bands including FirstNet. It uses digital signal processing (DSP) filtering technology to eliminate adjacent channel interference. This repeater has up to two non-contiguous wideband and thirty-two non-contiguous narrowband filters that can be supported in the 700 MHz and 800 MHz public safety frequencies. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
