| New RF and Microwave Products this Week . |
|
|
| Handheld Cable and Antenna Analyzer from 5 kHz to 6 GHz | |
RF Spectrum Analyzer
from Anritsu
|
| The Site Master™ MS2085A from Anritsu is a Handheld Cable and Antenna Analyzer that operates from 5 kHz to 6 GHz. It integrates cable and antenna analysis with spectrum analysis and monitoring functionalities, offering a comprehensive testing solution for professionals across various industries. This analyzer has a dynamic range of 105 dB with support for 10,049 data points and has a measurement speed of 350 µs/data point in fast sweep mode. |
| |
Download Datasheet
Product Details | |
|
|
|
| Benchtop Signal Generators from 10 MHz to 18 GHz | |
Signal Generator
from Boonton
|
| The SGX1000 Series from Boonton are Signal Generators that operate at a frequency range from 10 MHz to 18 GHz. They have an output power range from -50 to 18 dBm and a switching speed of 350 µs. These generators have a phase noise of -122 dBc/Hz @10 kHz offset and a jitter of 60 fs. They offer high performance signal generation with an easy-to-use interface in a compact form factor. |
| |
Download Datasheet
Product Details | |
|
|
|
| Microwave Signal Sources from 3 to 67 GHz | |
Signal Generator
from Saluki Technology
|
| The SFS-Pro Series from Saluki Technology are Microwave Signal Generators with a frequency range from 3 to 67 GHz. They exhibit very low phase noise to achieve excellent signal generation in applications requiring ultra-low phase noise, large dynamic and stable output power, and multi-channel synchronization. These signal generators support narrow pulse modulation functions with a pulse width of less than 50 ns and can realize multi-channel coherent signal generation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2-Way MLDD Power Divider from 0.4 to 7.125 GHz | |
Power Divider
from KRYTAR
|
| The 600407125 from KRYTAR is a 2-Way Power Divider that operates from 0.4 to 7.125 GHz. This MLDD (matched-line directional divider) can handle an input power of 10 W, provides more than 15 dB of isolation, and has an insertion loss of less than 1 dB. It uses a MLDD proprietary design to provide ultra-high performance over a broad frequency range. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W GaN Solid-State Power Amplifier from 0.5 to 2.7 GHz | |
RF Amplifier
from Empower RF
|
| The 1208 from Empower RF is a Solid-State Power Amplifier that operates from 0.5 to 2.7 GHz. It delivers a saturated CW output power of 100 W with a power gain of 56 dB and supports CW, AM, and FM modulation types. This amplifier has a solid-state Class AB design and utilizes the latest high-power RF GaN transistors. It features built-in control and monitoring, with protection functions to ensure high availability. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by AT Microwave | | | |
|
|
| 800 W Beryllium Oxide Bolt-Down Termination from DC to 2 GHz | |
Termination
from Preferred Power Products (P3)
|
| The TMC1200-50 from Preferred Power Products (P3) is a Beryllium Oxide Bolt Down Termination that operates from DC to 2.0 GHz. It can handle a CW input power of 800 W and peak power of 1200 W (pulse of 20 ms with a 40% duty cycle). This termination has a thick film resistor with a DC resistance of 50 ohms and a VSWR of 1.15:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 dB Driver Amplifier from 16 to 44 GHz | |
RF Amplifier
from ATEK MIDAS
|
| The ATEK567N4 from ATEK MIDAS is a wideband driver amplifier that operates from 16 to 44 GHz. It provides a flat gain of 19 to 22.4 dB across the band and has a P1dB of 19 dBm. It requires a single positive supply of 5 V and consumes 182 mA of current. The amplifier is available in a compact 4×4 mm low cost SMD package with input and output matched to 50 ohms internally. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 500 W CW/Pulsed Solid-State Power Amplifier from 2 to 8 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2085P-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 2 to 8 GHz. It delivers a CW/Pulsed output power of 500 W with a power gain of more than 57 dB (gain adjustment range of 20 dB). This Class A/AB amplifier uses an advanced design to provide linear performance with harmonics of -20 dBc and spurious levels of less than -60 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 dB Directional Coupler from 2 to 6 GHz | |
Directional Coupler
from RFTR Electronics
|
| The JC20006000P54C50 from RFTR Electronics is a Directional Coupler that operates from 2000 to 6000 MHz. This 50 dB coupler provides a directivity of 20 dB. It can handle a CW input power of 250 W and has an insertion loss of less than 0.2 dB. This coupler is available in a compact module that measures 52.6 x 48.7 x 27.9 mm with N-type (female) and SMA-female connectors. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by AT Microwave | | |
|
|
| High-Performance Remote Wideband Recorder & Receiver from 9 kHz to 18 GHz | |
RF Spectrum Recording and Playback System
from CRFS
|
| The RFeye SenS Remote 100-18 from CRFS is a Remote Spectrum Receiver with I/Q Recording that operates from 9 kHz to 18 GHz. It combines the RF and edge-processing capabilities of the RFeye Node 100-18 together with the high-speed recording feature of the RFeye SenS family. This recorder can perform all the functions of a standard RFeye Node but with the addition of full-rate wideband I/Q streaming (100 MHz IBW). |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Channel Narrowband/Wideband RF Transceiver from 30 to 6000 MHz | |
RF Transceiver
from Analog Devices
|
| The ADRV9006 from Analog Devices is a 2x2 RF Transceiver that operates from 30 to 6000 MHz, covering the UHF, VHF, cellular frequency bands, and ISM bands. It has dual-channel transmitters, dual-channel receivers with integrated synthesizers, and digital signal processing functions. This transceiver has a Tx/Rx bandwidth from 12 kHz (narrowband) to 40 MHz (wideband). |
| |
Download Datasheet
Product Details | |
|
|
|
| 12 GHz Shielded Test Box with Double Doors | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-3498 from RF Electronics is an RF Shielded Test Box for frequencies from 20 MHz to 12 GHz. It is designed for wireless device testing, digital forensics, R&D and EMC testing applications. This test box has an internal dimension of 780 x 780 x 680 mm and includes thick RF-absorbing foam that deadens standing waves and reflections. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged L1/L2-Band GPS Antennas with Integrated LNAs | |
GPS/GNSS Antenna
from Antcom Corporation
|
| The 2DG1215X-MNX-X-A Series from Antcom are GPS L1/L2 Antennas that operate at 1575.42 ± 12 MHz (L1) and 1227.60 ± 12 MHz (L2). They have RHCP polarization and a VSWR of less than 2.0:1. These antennas have an integrated low-noise amplifier (LNA) that delivers a P1dB of +13 dBm and has a noise figure of 3.5 dB. They can handle a CW input power of 1 W and support the M-code signal. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact 50 W, 50-Ohm RF Termination from DC to 110 GHz | |
Termination
from SHF Communication Technologies
|
| The SHF TRM110 A from SHF Communication Technologies is an RF Termination that operates from DC to 110 GHz. It can handle an input power of 50 W. This 50-ohm termination is designed to meet individual requirements of the customer and to avoid the use of additional adapters in the setup. It has dedicated mounting holes on the rear side to allow secure installation on a mounting plate for stable system integration. |
| |
Download Datasheet
Product Details | |
|
|
|
| Radiation-Tolerant Space Data Link from 969 to 1206 MHz for LEO Operations | |
Data Link
from Collins Aerospace
|
| The SDL-1000 from Collins Aerospace is a Space Data Link that operates in the L-band from 969 to 1206 MHz. It supports Joint All Domain Command and Control (JADC2) requirements for real-time information exchange between Low-Earth Orbits (LEO) and the terrestrial domain in the connected battlespace. This data link supports the U.S. Space Development Agency’s (SDA) Tranche 1 Transport Layer (T1TL) program. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact UWB Antenna from 6.25 to 8.25 GHz for Wearables | |
Antenna
from AntennaWare
|
| The AW-BW-6580W11 from AntennaWare is a UWB Antenna that operates from 6.25 to 8.25 GHz covering UWB channels 5-9. This linearly polarized antenna has an omnidirectional radiation pattern. It is designed to increase coverage in directions obscured by the human body, with 10-20 dB increased forward path gain in NLoS directions. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| RF Mixer Die from 20 to 80 GHz for Military and Space Applications | |
RF Mixer
from mmTron Inc
|
| The TMC170 from mmTRON is an RF Mixer that operates from 20 to 80 GHz. It provides an LO power range from -3 to +3 dBm and has an integrated LO amplifier which eliminates the need for an external LO buffer. This mixer has a conversion gain of 0 dB and provides an RF-to-IF isolation of 80 dB. The balanced architecture of this mixer in LO, RF and IF ensures outstanding harmonic performance and the wide bandwidth of IF, LO and RF ports provides much flexibility in frequency planning and simplifies the design. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2.4/5/6 GHz WLAN (Wi-Fi) and Bluetooth® Device Testing Set | |
RF Test Set
from NOFFZ Technologies
|
| The IoT Test Node ITN 1000 from NOFFZ Technologies is a WLAN (Wi-Fi) and Bluetooth® Device Testing tool. It is suitable for 2.4/5/6 GHz Wi-Fi 6E (802.11ax), 2x2 MIMO, and Bluetooth® 5.2 BDR/EDR/BLE standards. This testing tool is designed for automated testing and can be used for development, prototyping, validation and production testing of wireless devices. |
| |
Download Datasheet
Product Details | |
|
