| New T&M Products . |
|
|
|
|
|
|
|
| 10 Port Vector Network Analyzer from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SN5090-10 from Copper Mountain Technologies is a 10-Port Vector Network Analyzer that operates from 300 kHz to 9 GHz. This VNA is an organic extension of the Compact VNA solutions offered by CMT. It enables the full complexity of VNA measurements, a streamlined calibration process, and reduced test times. |
| |
Download Datasheet
Product Details | |
|
|
|
| Handheld Cable and Antenna Analyzer from 5 kHz to 6 GHz | |
RF Spectrum Analyzer
from Anritsu
|
| The Site Master™ MS2085A from Anritsu is a Handheld Cable and Antenna Analyzer that operates from 5 kHz to 6 GHz. It integrates cable and antenna analysis with spectrum analysis and monitoring functionalities, offering a comprehensive testing solution for professionals across various industries. This analyzer has a dynamic range of 105 dB with support for 10,049 data points and has a measurement speed of 350 µs/data point in fast sweep mode. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 GHz Compact Real-Time Spectrum Analyzer/Receiver | |
RF Spectrum Analyzer
from HAROGIC Technologies
|
| The SAN-400 from HAROGIC Technologies is a Real-Time Spectrum Analyzer that operates from 9 kHz to 40 GHz. This receiver / spectrum analyzer module is based on a superheterodyne digital IF architecture. It has a USB3.0 interface and high-speed FPGA digital signal processing that provides good performance in a compact size. The analyzer is optimized for applications such as receivers, spectrum monitoring, and RF testing. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single/Multi-Channel Phase-Coherent Signal Generators from 1 kHz to 51 GHz | |
Signal Generator
from AnaPico
|
| The APHSPXX Series from AnaPico are Single/Multi-Channel Phase-Coherent Signal Generators with a frequency range from 1 kHz to 51 GHz. They are designed for applications where good signal quality, accurate and wide output power ranges, and very stable phase coherence among all channels are required. These signal generators have a high-stability OCXO reference that provides excellent frequency accuracy and stability. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Compact and Cost-Effective Signal Generator from 9 kHz to 3.2 GHz | |
Signal Generator
from Rohde & Schwarz
|
| The R&S®SMC100A from Rohde & Schwarz is a Signal Generator with a frequency range from 9 kHz to 1.1 GHz/3.2 GHz. It supports AM/FM/fM/pulse modulation functions and has an internal modulation and pulse generator to supply the required modulation signals. This signal generator has an SSB phase noise of -105 dBc (at 20 kHz offset, 1 GHz frequency) and non-harmonics of better than -60 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automated Radio Communication Test System from 9 kHz to 6 GHz | |
RF Test Set
from Viavi Solutions
|
| The CX700 ComXpert from VIAVI Solutions is an Automated Radio Communications Test System that operates from 9 kHz to 6 GHz. It is the latest generation of innovative tactical radio test instruments from VIAVI that is designed for commercial, tactical, military, and infrastructure applications in production, depot-level, and field environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Standalone Portable Shield Test Box for Wireless Testing Up to 18 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-3699 from RF Electronics is a Standalone Portable RF Shielded Test Box that operates from 20 MHz to 18 GHz. This multi-Device Under Test (DUT) test bed is a great way to effectively utilize the limited real estate space by eliminating the need to test devices in separate RF shield rooms. It can easily house standard off-the-shelf temperature chambers like TestEquity TE-107 or Espec SH-242 using a built-in sliding tray and supports extreme temperature testing of the DUT. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5/6 GHz WLAN (Wi-Fi) and Bluetooth® Device Testing Set | |
RF Test Set
from NOFFZ Technologies
|
| The IoT Test Node ITN 1000 from NOFFZ Technologies is a WLAN (Wi-Fi) and Bluetooth® Device Testing tool. It is suitable for 2.4/5/6 GHz Wi-Fi 6E (802.11ax), 2x2 MIMO, and Bluetooth® 5.2 BDR/EDR/BLE standards. This testing tool is designed for automated testing and can be used for development, prototyping, validation and production testing of wireless devices. |
| |
Download Datasheet
Product Details | |
|
|
| Featured eBook - Download Now! | | |
|
|
| Modular THz Signal Frequency Extender from 470 to 540 GHz | |
Signal Generator Extender
from ACST GmbH
|
| The 1215B-AL from ACST GmbH is a THz Signal Frequency Extender that operates from 470 to 540 GHz (multiplication factor of 36). It requires input frequencies from 13.05 to 15 GHz and provides a THz output with a power of up to 10 mW. This frequency extender has a modular design that allows users to have access to more than one band by combining multiple standard extenders. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8 GHz USB Real-Time Spectrum Analyzer with True I/Q Streaming | |
RF Spectrum Analyzer
from Aaronia AG
|
| The SPECTRAN® V6 PLUS 500XA-6 from Aaronia is a Real-Time Spectrum Analyzer (RTSA) and monitoring receiver that operates from 10 MHz to 8 GHz. It has a real-time bandwidth of 80 MHz (optional 120 MHz) I/Q and a scanning speed of up to 440 GHz/s. This RTSA has an FFT-based probability of intercept (POI) of up to 97 ns and an I/Q-based POI of up to 10 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| True RMS Waveguide Power Sensor from 50 to 75 GHz | |
RF Power Meter & Sensor
from LadyBug Technologies
|
| The LB5975W from LadyBug Technologies is a True RMS Power Sensor that operates from 50 to 75 GHz. It has a dynamic range from -50 dBm to +18 dBm and provides accurate power measurements of up to +18 dBm or 63 mW (continuous/pulsed) on any modulated signal with any modulation type. This power sensor can measure up to 384 samples per measurement and has a measurement time of less than 38.4 ms per average. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Analog Signal Generators from 9 kHz to 6 GHz | |
Signal Generator
from Keysight Technologies
|
| The N5171B EXG X-Series from Keysight Technologies are RF Analog Signal Generators with a frequency range from 9 kHz to 6 GHz. They provide a sine, square, triangle and positive/negative ramp waveform with an SSB phase noise of -133 dBc/Hz (at 20 kHz offset) and a frequency resolution of 0.001 Hz. These signal generators can perform basic parametric testing of components and functional verification of receivers with industry-leading output power. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4x4 Blocking Matrix Switch from DC to 26.5 GHz | |
Switch Matrix
from JFW Industries
|
| The 50MS-455 from JFW Industries is a 4x4 Blocking Matrix Switch that operates from DC to 26.5 GHz. It can handle an input power of 50 W (average) and has an insertion loss of 5.5 dB. This switch matrix has a switching speed of 20 ms and provides 100 dB of isolation. It is constructed using switches on both halves of the matrix and allows one input port to be set to only one output port at a time. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Probe Antenna Measurement System from 400 MHz to 6 GHz | |
Antenna Measurement System
from Microwave Vision Group
|
| The SG 24 from MVG is a Multi-Probe Antenna Measurement System for frequencies from 400 MHz to 6 GHz (extendable to 10 GHz). It has a dynamic range of 70 dB (from 0.4 – 6 GHz) and a measurement time of approximately 1 minute. This antenna measurement system uses near-field/spherical or far-field technology to measure parameters such as gain, directivity, beamwidth, cross-polar discrimination, sidelobe levels, front-to-back ratio, 1D, 2D and 3D radiation patterns, radiation pattern in any polarization (linear or circular), and more. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB-Powered Programmable RF Signal Generator from 14 to 30 GHz | |
Signal Generator
from DS Instruments
|
| The SG30000L from DS Instruments is an RF Signal Generator with a frequency range from 14 to 30 GHz. It provides an output power from -18 dBm to +13 dBm and has harmonics of less than -20 dBc. This signal generator has an amplitude resolution of 0.5 dB (calibrated digital steps) and 0.1 dB (sub-step vernier – uncalibrated) and a frequency step size of 2 Hz. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB and Ethernet Controlled Signal Generator from 0.1 to 44 GHz | |
Signal Generator
from Mini Circuits
|
| The SSG-44G-RC from Mini-Circuits is a Signal Generator with a frequency range from 0.1 to 44 GHz. It can be controlled to provide an output power from –40 to 17 dBm with a power level resolution of 0.5 dB and a frequency resolution of 1 Hz. The signal generator can be controlled via USB or Ethernet (supporting SSH, HTTP & Telnet protocols) and is designed to connect up to 25 modules in series (daisy chain) using dynamic addressing. |
| |
Download Datasheet
Product Details | |
|
|
|
| VNA Cable Assemblies from DC to 67 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The Stability VNA Cable Assemblies from Maury Microwave are Test Port Cable Assemblies that operate from DC to 67 GHz. They have excellent phase stability (up to 8 degrees) with flexure and ensure repeatable and reliable measurements. The assemblies have an anti-skid band to ensure that they can be arbitrarily positioned with no spring-back or stress on the DUT. |
| |
Download Datasheet
Product Details | |
|
|
|
| Microwave Signal Sources from 3 to 67 GHz | |
Signal Generator
from Saluki Technology
|
| The SFS-Pro Series from Saluki Technology are Microwave Signal Generators with a frequency range from 3 to 67 GHz. They exhibit very low phase noise to achieve excellent signal generation in applications requiring ultra-low phase noise, large dynamic and stable output power, and multi-channel synchronization. These signal generators support narrow pulse modulation functions with a pulse width of less than 50 ns and can realize multi-channel coherent signal generation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| USB Based Tracking Generator from 100 kHz to 12.4 GHz | |
Signal Generator
from Signal Hound
|
| The USB-TG124A from Signal Hound is a USB-based tracking generator that operates from 100 kHz to 12.4 GHz. It works with the USB-SA124A spectrum analyzers to measure filters, attenuators, amplifiers and other components to carry out scalar network analyzer measurements. It is compact, simple to use, and an effective troubleshooting and analysis tool in the lab or in the field. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.25 GSa/s Function/Arbitrary Waveform Generators | |
Arbitrary Waveform Generator
from RIGOL Technologies
|
| The DG900 Pro Series from Rigol are Function/Arbitrary Waveform Generators that have a sample rate of up to 1.25 GSa/s, a waveform length of up to 32 Mpts/CH and have a vertical resolution of 16 bits. These dual-channel generators combine multiple functions including a function generator, arbitrary waveform generator, noise generator, pulse generator, harmonic generator, analog/digital modulator, and frequency counter. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB-Powered Real-Time Peak Power Sensor from 50 MHz to 40 GHz | |
RF Power Meter & Sensor
from Boonton
|
| The RTP5006 from Boonton is a Real-Time Peak Power Sensor that operates from 50 MHz to 40 GHz. It has a dynamic range from -60 dBm to +20 dBm and a pulse width of more than 10 ns. This power sensor offers excellent performance with wide video bandwidth, fast rise times, fine time resolution, narrow minimum pulse widths, and good measurement reading rates. |
| |
Download Datasheet
Product Details | |
|
|
|
| Electromagnetic Analysis Tool for Predicting Radar Cross Section | |
Software
from Remcom
|
| XGtd from Remcom is a Ray-Based EM Simulation Software for assessing the effects of a vehicle or vessel on antenna radiation, predicting coupling between antennas and predicting radar cross section (RCS). It incorporates techniques including Geometric Optics (GO), the Uniform Theory of Diffraction (UTD), Physical Optics (PO), and the Method of Equivalent Currents (MEC). |
| |
Download Datasheet
Product Details | |
|
|
|
| Far-Field Antenna Measurement System for OTA Testing up to 330 GHz | |
Antenna Measurement System
from KREEMO
|
| The M360°R from Kreemo is a 330 GHz Far-Field Antenna Measurement System. It can be extended up to the Sub-THz spectrum and is compatible with commercial mmWave/THz frequency extenders. This system is a hybrid 2-in-1 solution using which both over-the-air (OTA) testing and conduction tests can be performed. It consists of a spherical far-field chamber with support for double-sided probing in all directions. |
| |
Download Datasheet
Product Details | |
|
