| Products to see at IMS 2024 . |
|
|
| High-Gain Pre-Driver Amplifier for 5G mMIMO from 3.3 to 4.2 GHz | |
RF Amplifier
from Qorvo
|
| The QPA9822 from Qorvo is a Linear Pre-Driver Amplifier that operates from 3.3 to 4.2 GHz. It provides a gain of 39 dB with a noise figure of 4.5 dB and has an output P1dB of 28 dBm. This amplifier is designed to handle wideband 5G NR instantaneous signal bandwidths, making it ideal for m-MIMO applications. It has external bias control capability for linearity optimization, a DC power shutdown feature and fast Enable/Disable for TDD operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| High Purity Signal Generators from 9 kHz to 54 GHz | |
Signal Generator
from AnaPico
|
| The APLC Series from Anapico are 1 to 4 channel high purity signal generators that operate from 9 kHz to 12.75, 20, 40 and 54 GHz. They are ideally suited for a wide range of applications, where good signal quality, accurate and wide output power ranges, and very stable phase coherence among all channels are required. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Path Vector Signal Generator from 100 kHz to 67 GHz | |
Signal Generator
from Rohde & Schwarz
|
| The R&S SMW200A from Rohde and Schwarz is a dual-path Vector Signal Generator that operates from 100 kHz to 67 GHz. It has a modular design that can be equipped with the exact options required for specific applications. This signal generator can be used in a number of configurations from a classic single-path vector signal generator to a multichannel MIMO receiver tester. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB Real Time Spectrum Analyzer from 9 kHz to 6.2 GHz | |
RF Spectrum Analyzer
from Tektronix, Inc.
|
| The RSA306B is a compact/portable Real Time Spectrum Analyzer from Tektronix that operates from 9 kHz to 6.2 GHz. It provides real time spectrum analysis, streaming capture and deep signal analysis capabilities in a low-cost, highly portable package that is ideal for field, factory, or academic use. |
| |
Download Datasheet
Product Details | |
|
|
|
| Signal Source Analyzer from 1 MHz to 54 GHz | |
Phase Noise Analyzer
from Keysight Technologies
|
| The E5058A SSA-X from Keysight Technologies is a Signal Source Analyzer with a frequency range from 1 MHz to 54 GHz. It evaluates the phase noise and other relevant parameters for RF signals and provides precise and accurate measurements in one box. This analyzer enables absolute and residual phase noise measurements with the built-in, clean internal signal source and advanced path delay compensation technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB-Controlled 3-Axis mmWave and THz Antenna Positioners | |
Antenna Positioner
from Milliwave Silicon Solutions
|
| The GIM04 from MilliBox is a 3-Axis mmWave and THz Antenna Antenna Positioner which can control the rotation in Elevation, Azimuth, and Polarization axes. It can adjust to various DUT form factors and adds a new level of versatility for daily over-the-air measurements. The gears of this antenna positioner are made of precision machined Delrin material for higher strength, precision, and a longer lifespan. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Direction-finding and Tracking Antenna from 2 to 40 GHz | |
Direction Finding Antenna
from Aaronia AG
|
| The IsoLOG® 3D DF 16-20400 from Aaronia is a 3D Ultrawideband Direction-finding and Tracking Antenna that operates from 2 to 40 GHz. These patented 3D DF antenna IsoLOG® 3D DF provide real 3D bearing including altitude and elevation. This unique functionality can give the bearing of flying transmitters (drones, airplanes etc.) and their 3D display in space. |
| |
Download Datasheet
Product Details | |
|
|
|
| Real-Time Spectrum Analyzer from 9 kHz to 18 GHz | |
RF Spectrum Analyzer
from Aaronia AG
|
| The SPECTRAN V6 ECO 100XA-18 from Aaronia AG is a Real-Time Spectrum Analyzer that operates from 9 kHz to 18 GHz. It has a real-time bandwidth of 60 MHz and a DANL of -170 dBm/Hz. This spectrum analyzer has a sweep speed of 500/3000 GHz/s and can scan 6 GHz in less than 2 ms (3 THz/s) with an FFT rate of 960 Million FFT-points/s (120 Million FFTs/s). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| GaN MMIC Front-End Module from 8.5 to 10.5 GHz | |
Front End Module
from WAVEPIA Co,. Ltd.
|
| The WPGM0811015FEM from WAVEPIA is an MMIC GaN Front-End Module that operates in the X-Band from 8.5 to 10.5 GHz. It consists of a switch, a low noise amplifier (LNA), a power amplifier (PA), and coupling capacitors. On the Tx side, this FEM delivers a saturated output power of 22.9 W (~43.6 dBm) with a small signal gain of 35.4 dB and, power-added efficiency (PAE) of 27.7% while on the Rx side, it provides a small signal gain of 23.3 dB and a noise figure of 3.9 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 kW Push-Pull LDMOS Transistor from 88 to 108 MHz | |
RF Transistor
from Polyfet RF Devices
|
| The LY2843V from Polyfet RF Devices is a Transistor that operates from 88 to 108 MHz. It has a push-pull LDMOS design that is designed for applications within the HF to VHF III. This transistor delivers a saturated output power of 2.1 kW and has a drain breakdown DC voltage rating of 120 V. It is available in an unmatched package and requires a DC supply of 50 V. |
| |
Product Details | |
|
|
|
| Low Noise Amplifier MMIC from 37 to 59 GHz | |
RF Amplifier
from Altum RF
|
| The ARF1208 from Altum RF is a Low Noise Amplifier that operates from 37 to 59 GHz. It delivers a saturated output power of 19 dBm with a gain of 26.5 dB and has a noise figure of 2.5 dB. This LNA has in-built ESD protection to simplify handling and assembly. It requires a DC bias voltage of 4 V and draws 80 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF-over-Fiber Module from 0.1 to 18 GHz for Civil & EW Communication | |
RF Over Fiber Module
from RFOptic
|
| The RFoF-18G-L0-Mini from RFOptic is an RF-over-Fiber (RFoF) Module that operates from 0.1 to 18 GHz. This module has a high spurious free dynamic range making it ideal for handling multiple signals of very different power levels. The Tx unit of this module uses an optical transmitter which converts wideband RF signals to an optical signal, and the Rx unit, converts the optical signal back to the RF signal. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-Octave Switch Filter Bank from 2 to 18 GHz | |
Switched Filter Bank
from ATEK MIDAS
|
| The ATEK656N5 from ATEK Midas is a Sub-Octave Switch Filter bank that operates from 2 to 18 GHz. It consists of an SP6T switch followed by 6 fixed frequency band pass filters and then another SP6T switch. This filter bank provides exceptional IIP3 power that enables high dynamic range wideband receiver frontends, and its sub-octave filter bank architecture improves overall system IIP2. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Open Boundary Quad-Ridged Horn from 0.7 to 10 GHz | |
Horn Antenna
from ETS-Lindgren
|
| The 3164-08 from ETS Lindgren is an Open Boundary Quad-Ridged Horn Antenna that operates from 700 MHz to 10 GHz. This linear or circular polarized (with hybrid option) horn provides cross-polarization isolation of more than 20 dB. It has an open boundary design similar to two double-ridged waveguide antennas placed orthogonally to each other. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 MHz Low Phase Noise OCXO Module | |
OCXO
from KVG Quartz Crystal Technology GmbH
|
| The O-22-ELPN-100M from KVG Quartz Crystal Technology is an OCXO Module that operates at 100 MHz. It provides a sine wave output with a phase noise of -190 dBc/Hz @ 1 MHz offset and has frequency stability of less than ± 10 ppb. The oscillator has a warm-up time of less than 5 minutes, requires a supply voltage of 12 V and a frequency control voltage from 0 to +10 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.5GS/s, 16-Bit, 2 to 12 Channel Arbitrary Waveform Generator | |
Arbitrary Waveform Generator
from Tabor Electronics
|
| The P25812B from Tabor Electronics is an Arbitrary Waveform Generator that can transmit, receive and perform digital signal processing. It has 12 channels with a maximum sample rate of 2.5 GS/s and 16-bit resolution. This signal generator has a phase noise of up to -134 dBc/Hz @ 10 kHz offset and an SFDR of better than -85 dBc. |
| |
Download Datasheet
Product Details | |
|
