| New RF and Microwave Products this Week . |
|
|
| 2 W GaAs pHEMT Power Amplifier from DC to 28 GHz | |
RF Amplifier
from Analog Devices
|
| The ADPA9007 from Analog Devices is a GaAs Power Amplifier that operates from DC to 28 GHz. It delivers a saturated output power of 2 W with a gain of 12.5 dB. This amplifier is fabricated on a GaAs pHEMT process with RF input and outputs internally matched and DC-coupled. It includes a temperature-compensated RF power detector and a temperature sensor. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 50-ohm 1:2 RF Balun MMIC from 1.5 to 13 GHz | |
Balun
from Mini Circuits
|
| The MTX2-133+ from Mini-Circuits is an RF Balun MMIC that operates from 1.5 to 13 GHz. It has an impedance ratio of 1:2 and provides outstanding repeatability with low insertion loss, low amplitude unbalance, low phase unbalance, and excellent common mode rejection. This 50-ohm balun can handle an input power of up to 2 W, has an insertion loss of less than 6.4 dB and a common mode rejection ratio (CMRR) of 37 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Port Double-Ridged Waveguide Magic tees from 840 MHz to 40 GHz | |
Waveguide Tee
from Scientific Microwave Corporation
|
| The SMC-176D Series from Scientific Microwave Corporation are 4-Port Double-Ridged Waveguide Magic Tees that operate from 840 MHz to 40 GHz. They provide more than 30 dB of isolation in the E-H plane, 15 dB in the co-linear axis, and have a VSWR of 1.6:1. These magic tees form an essential component for the power combining assemblies and radar systems. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Microwave Frequency Synthesizer from 100 MHz to 27 GHz | |
Frequency Synthesizer
from dB Control
|
| The dB-9006 Magnus Opus from dB Control is a Microwave Frequency Synthesizer that operates from 100 MHz to 27 GHz. It has a resolution of 1 Hz with a tuning speed of less than 50 µs. This synthesizer also has a secondary output with a tuning range from 1 to 2000 MHz. This instrument-grade synthesized signal sourcing solution offers the best-in-class phase noise performance with non-harmonic spurious levels of -80 dBc. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by HUBER+SUHNER | | | |
|
|
|
|
|
|
|
|
|
|
|
|
| 4-Channel 10 kW GaN RF Generator from 25.8 to 28.5 MHz | |
Microwave Generator
from RFHIC
|
| The RIU002710K0-20TG from RFHIC is a GaN RF Generator that operates from 25.8 to 28.5 MHz. It has 4 channels can can delivers an RF output power from 2.5 kW to 10 kW with an efficiency of up to 70%. The generator can provides continuous wave (CW) and pulse output power adjustable from 1W to 2500W at 27.12 MHz at each channel. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Port USB Vector Network Analyzer from 100 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The C1209 is a two port computer-controlled vector network analyzer that operates from 100 kHz to 9 GHz. It has a dynamic range of 148 dB and output power range from -60 dBm to 15 dBm. The VNA can measure all four S-Parameters, has a measurement speed of 10 microseconds and can measure up to 500,001 points. |
| |
Download Datasheet
Product Details | |
|
|
|
| Omnidirectional Co-Linear Antenna from 27 to 29 GHz for 5G Applications | |
Antenna
from TMYTEK
|
| The ANT-COCO-2729-BEK28 from TMYTEK is a Coaxial Co-linear (COCO) Antenna that operates from 27 to 29 GHz. It has an omnidirectional beamwidth in the horizontal plane and a vertical 3 dB beamwidth of 25°. This antenna has a minimum return loss of 10 dB, cross-polarization of 20° and provides a gain of 7.5 dB. This antenna measures 66.5 (H) x 12.5 (Dia.) mm and has 2.92 mm (K-type) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Real-Time Spectrum Analyzer from 9 kHz to 18 GHz | |
RF Spectrum Analyzer
from Aaronia AG
|
| The SPECTRAN V6 ECO 100XA-18 from Aaronia AG is a Real-Time Spectrum Analyzer that operates from 9 kHz to 18 GHz. It has a real-time bandwidth of 60 MHz and a DANL of -170 dBm/Hz. This spectrum analyzer has a sweep speed of 500/3000 GHz/s and can scan 6 GHz in less than 2 ms (3 THz/s) with an FFT rate of 960 Million FFT-points/s (120 Million FFTs/s). |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by HUBER+SUHNER | | |
|
|
| Radio Wave Biomass Absorbers Up to 110 GHz | |
Microwave Absorber
from TDK RF Solutions
|
| The IS-BP Series from TDK Corporation are Biomass Radio Wave Absorbers that have a frequency range of up to 110 GHz. They incorporate biomass IS materials that cover a wide frequency range from microwaves to millimeter waves and sub-millimeter waves, exhibiting excellent radiowave absorption performance. These absorbers utilize foamed polyethylene as a base material along with ohmic loss of carbon. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 W CW/Pulsed Solid-state Power Amplifier from 1 to 6 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2070D-LC from Exodus Advanced Communications is a Solid-state Power Amplifier that operates from 1 to 6 GHz. It delivers a saturated output power of more than 200 W with a gain of over 53 dB. The amplifier has built-in protection circuits with optional monitoring parameters for Forward/Reflected power, VSWR, voltage, current & temperature sensing for superb reliability and ruggedness. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged Low-Noise Disciplined Rubidium Oscillator | |
GPS/GNSS Disciplined Oscillator
from Safran Electronics & Defense
|
| The SRO-5680 from Safran is a low noise Disciplined Rubidium Oscillator that integrates complex synchronization functionality in a low-cost, super-small package that is EMI-shielded and rugged. It utilizes Safran’s SmarTiming+® technology to provide a host of integrated GPS/GNSS disciplining and timing features. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Profile Wirewound Chip Inductors from 0.5 to 13 nH | |
RF Inductor
from Coilcraft
|
| The 0201HT Series from Coilcraft are Low Profile Wirewound Chip Inductors with inductance values from 0.5 to 13 nH. They have higher Q and lower DCR than similarly sized thin-film inductors and are optimized for high-frequency impedance matching in applications such as cell phones, wearable devices, Wi-Fi, Bluetooth, GPS, and LTE/5G IoT networks. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 GHz RF Front-End Module for NB-IoT and Cat-M1/M2 Applications | |
Front End Module
from Qorvo
|
| The QM55011 from Qorvo is an RF Front-End (RFFE) Module for NB-IoT and Cat-M1/2 applications. It supports low-band (663 to 915 MHz) and mid-band (1695 to 2010 MHz) frequencies. This cellular IoT module includes an integrated harmonic rejection filter, an SP6T Tx/Rx antenna switch, and an SEM. It also features universal multi-band bolt-on power amplifiers with an adaptive biasing scheme for maximum PA efficiency. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Power Long-Range WAN Module from 863 to 870 MHz | |
RF Module
from Wurth Elektronik
|
| The Daphnis-I from Wurth Elektronik is a Long-Range WAN Module that operates from 863 to 870 MHz. It delivers an RF bitrate of 50 kbps and has a line of range of 25 km. This module is based on an STM32WLE5CCU6 chip and supports Class A, Class B, and Class C long-range WAN classes. It is compliant with 1.0.4 Long-Range-WAN specifications supporting the EU868 frequency band. |
| |
Download Datasheet
Product Details | |
|
|
|
| WR-22 Broadwall Couplers from 33 to 50 GHz | |
Waveguide Coupler
from Narda-MITEQ
|
| The 22-304A-xx-6R-6R-6R from Narda-MITEQ are Broadwall Couplers that operate from 33 to 50 GHz. They are available in coupling values of 3, 6, 10 and 20 dB and provide a directivity of 35 dB. These couplers can handle an input power of up to 50 W, have an insertion loss of less than 0.7 dB and a VSWR of 1.05:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz High-Precision Rubidium Oscillators | |
Rubidium Oscillator
from Abracon LLC
|
| The AR50LC from Abracon are 10 MHz Rubidium Oscillators. They provide sinewave or CMOS outputs with a frequency stability of ±0.3 ppb (over operating temperature) and an SSB phase noise of -145 dBc/Hz (at 100 kHz offset). These oscillators require a DC supply of 5 or 12 V and have features such as lock monitor output and voltage control function to support a wide range of applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Phase-Locked Voltage Controlled Oscillators (PLVCO) from 10 MHz to 32 GHz | |
Voltage Controlled Oscillator
from Luff Research, an Ironwave Technologies Company
|
| The PLVCO Series from Luff Research are Phase-Locked Voltage Controlled Oscillators from 10 MHz to 32 GHz. They provide an output power of more than +13 dBm with a variation of 2 dB and a phase noise of -140 dBc/Hz (at 1 MHz offset). These PLVCO’s can be configured to operate with either an external reference from 10 to 100 MHz or an internal TCXO (±0.5 PPM). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Harmonic Mixer IC from DC to 20 GHz | |
RF Mixer
from HYPERLABS
|
| The HL9334 from Hyperlabs is a Harmonic Mixer with an RF frequency range from DC to 20 GHz, LO Frequency from 1 to 7 GHz and IF Frequency from DC to 1 GHz. It provides an LO-to-RF isolation of 70 dB, has an input noise floor of -130 dBm/Hz and a conversion loss of 20 dB. This harmonic mixer IC requires a DC supply of –5 V / +2.5 V / +6 V. It is available in a 28-lead QFN gel-pak package that measures 4.00 x 4.00 x 1.25 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 W Directional Coupler from 6 to 40 GHz for 5G Applications | |
Directional Coupler
from MECA
|
| The 750-20-23.000 from MECA is a directional coupler that operate from 6 to 40 GHz. It has a coupling value of 20 dB and can handle up to 20 watts of power. The coupler has an insertion loss of less than 1.3 dB and directivity of more than 12 dB. It is available in a module with 2.40 mm female connectors and comes with a 36-month manufacturer warranty. |
| |
Download Datasheet
Product Details | |
|
|
|
| Two-Piece Drawn-Seamless EMI/RFI Shield Cover | |
Board Level EMI/RFI Shielding Can
from Masach Tech
|
| The MS155-20C-NS from Masach Tech is a 2-Piece EMI/RFI Shield Cover that measures 15.5 x 11.5 x 2.1 mm (L x W x H). This EMI/RFI shield cover is made using Nickel silver and has snap-fit mounting. Masach's drawn-seamless EMI/RFI shields provide excellent performance across key metrics with a seamless protective cage, robust construction and optimal planarity. |
| |
Download Datasheet
Product Details | |
|
|
|
| Full Turn-Key, Portable Test Chambers from 4 to 110 GHz | |
Antenna Measurement System
from Microwave Vision Group
|
| The Mini Compact-Range (Mini-CR Series) from Microwave Vision Group are Full Turn-Key Test Chamber with a frequency range from 4 to 110 GHz. They are designed for effective and efficient testing of microwave and millimeter-wave high-gain antennas and radar, as well as high-frequency antenna measurements and OTA testing. These compact test range provide a quiet zone diameter of up to 0.5 m and utilizes strategically engineered geometries and materials to minimize multi-path effects. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
