| Featured Products this Week . |
|
|
| 2-Port USB Controlled VNA from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SC5090 from Copper Mountain Technologies is a modular 2-port compact VNA for 2-path measurements that operates from 300 kHz to 9 GHz. It has a dynamic range of 140 dB, an output power of 15 dBm, and a typical measurement speed of 16 µs per point. The VNA has a directivity of 46 dB and can be used to measure all four S parameters (S11, S21, S12, and S22). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Compact Ceramic Chip Inductors from 1 to 220 nH | |
RF Inductor
from Coilcraft
|
| The 0402HP Series from Coilcraft are Ceramic Chip Inductors with inductance values from 1 to 220 nH. They have a Q-factor of up to 105 (at 1.7 GHz) and self-resonant frequencies of up to 16 GHz. These inductors have a current handling capability of up to 2.3 A and an operating temperature range of -40°C to +125°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 Watt CW GaN Amplifier from 20 MHz to 6 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP1064 is a solid state high power amplifier that operates from 20 MHz to 6 GHz. The amplifier provides a CW output power of 25 Watts with a flatness of 4 dB peak to peak. This Class AB GaN Amplifier module requires a 50 V DC supply and draws 3 Amps of current. It can be used with all single channel modulation standards and applications requiring high power and ultra-wide band coverage. |
| |
Download Datasheet
Product Details | |
|
|
|
| Coaxial TEM Single Loop Coupler from 2 to 8 GHz | |
Directional Coupler
from Scientific Microwave Corporation
|
| The SMC-073TEM0208 from Scientific Microwave Corporation is a TEM Single Loop Coupler that operates from 2 to 8 GHz. It is available in coupling values from 30 to 60 dB with a directivity of 14 dB and has a VSWR of 1.4:1. This coupler is available in a module with various coaxial connector options and also has an option for pressurized and TVAC units. |
| |
Download Datasheet
Product Details | |
|
|
|
| Reflective SP2T Switch from 30 to 40 GHz | |
RF Switch
from Quantic PMI (Planar Monolithics)
|
| The P2T-3040-60-R-292FF-RC from Quantic PMI is an SP2T Switch that operates from 30 to 40 GHz. It has a switching speed of less than 100 ns and provides an isolation of more than 60 dB. This reflective switch can handle an input power of up to 20 dBm and has an insertion loss of less than 4 dB. It incorporates a TTL-compatible driver for easy system integration. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Rohde & Schwarz | | |
|
|
| 40 Watt, 4-Way Power Divider from 380 to 960 MHz | |
Power Divider
from MECA
|
| The 804-4-0.670 from MECA is a 4-way power divider that operates from 380 to 960 MHz covering all the Public Safety bands. It can handle up to 40 watts of power, has an insertion loss of under 0.8 dB and isolation over 10 dB. The power divider is available in a module with N-type Female connectors and is ideal for enterprise & public safety networks such as UHF, VHF, 700 MHz & Cell bands. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3 dB Fixed RF Attenuator from DC to 18 GHz | |
Fixed Attenuator
from Inmet by Spectrum Control
|
| The 18N50W-03F from Inmet is a Fixed RF Attenuator that operates from DC to 18 GHz. It provides an attenuation of 3 dB with an attenuation accuracy of ±0.75 dB. This attenuator can handle an input power of up to 50 W and has a VSWR of less than 1.25:1. It is available in a module that measures 4.50 mm in length and has N-type (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50-Ohm Broadband Termination from DC to 70 GHz | |
Termination
from HYPERLABS
|
| The HL9527 from HYPERLABS is an RF Termination that operates from DC to 70 GHz. It can handle an input power of up to 24 dBm and has a return loss of 20 dB. The 50-ohm termination is used to provide a matched (dummy) load on an unused port to prevent unwanted reflections. This RoHS-compliant termination is available in a module that measures 20.30 x 9.57 x 9.57 mm and has 1.85 mm connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Variable Gain Amplifier from 1 to 24 GHz | |
RF Amplifier
from ETL Systems
|
| The A-VGAKX-310010 from ETL Systems is a Variable Gain Amplifier that operates from 1 to 24 GHz. It provides a gain range from 0 to 26 dB which can be adjusted in 0.5 dB steps and has a noise figure of less than 3.5 dB. This amplifier requires a DC supply from 12 to 24 V and consumes 250 mA of current. It is available in a module that measures 93.00 x 52.90 x 15.00 mm with 2.92 mm connectors and uses TTL/SPI control with optional DIP switch control. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Coaxial 180° Hybrid Coupler from 2 to 4 GHz | |
180 Degree Hybrid Coupler
from RF-Lambda
|
| The RFHB02G04GPI from RF-Lambda is a 180° Hybrid Coupler that operates from 2 to 4 GHz. It has a coupling factor of 3 dB and provides an isolation of more than 20 dB. The coupler can handle up to 50 W of average power, 1 kW of peak input power, and has a VSWR of 1.35:1. It has an amplitude imbalance of ±0.3 dB and a phase imbalance of ±8°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Front-End Module from Zigbee/Thread/Bluetooth Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY66409-11 from Skyworks is a 2.4 GHz Front-End Module for Zigbee®/Thread/Bluetooth® applications. It has an integrated Power Amplifier that delivers an output power of up to +15 dBm, an LNA with a noise figure of 2.5 dB, and a low-loss bypass path. This module has a single-ended transmit/receive interface and a switch ON/OFF time of less than 800 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz, Integrated Wi-Fi 7 (802.11be) Front-End Module | |
Front End Module
from Qorvo
|
| The QM42500 from Qorvo is a 2.4 GHz Wi-Fi 7 Front-End Module (FEM). It consists of a power amplifier (PA), single pole four throw (SP4T) antenna switch, bypassable low noise amplifier (LNA) with multiple RX states, and a power coupler. This FEM includes an integrated matching circuitry that minimizes layout area in the application. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G Sub-6 GHz Modules for IoT/eMBB/URLLC Applications | |
Cellular Module
from Quectel
|
| The RM500U Series from Quectel are 5G Sub-6 GHz Modules that are optimized for IoT/eMBB/URLLC applications. They deliver a data rate of 2.6 Gbps (DL) and 1 Gbps (UL). These modules are available in three variants: RM500U-CN, RM500U-EA and RM500U-CNV to provide worldwide 5G (standalone and non-standalone architecture) and LTE-A coverage. |
| |
Download Datasheet
Product Details | |
|
|
|
| Beamforming Transceiver IC from 24 to 29.5 GHz for 5G-NR Applications | |
Beamforming IC
from Sivers Semiconductors
|
| The TRXBF02 from Sivers Semiconductors is a 5G-NR RFIC that operates from 24.0 to 29.5 GHz. It is 3GPP-compliant solution that enables full transceiver design with a uniquely high level of integration, supporting tiling of several RFICs together in bigger arrays for longer reach and greater performance. This RFIC supports different markets and frequency bands using the same hardware and is a perfect choice for licensed 5G spectrum. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Power Multi-Core Bluetooth 5.2 SoC for Wearable Applications | |
Wireless Chipset
from Renesas
|
| The DA14592 from Renesas is a Multi-Core Wireless Bluetooth Low Energy (BLE) 5.2 System-on-Chip (SoC). It consists of the latest ARM Cortex M33 application processor with a floating-point unit (FPU), advanced power management functionality and a cryptographic security engine. This SoC also has analog/digital peripherals, a software configurable protocol engine with a BLE 5.2-compliant radio, and a memory unit (96 KB of RAM, 16 KB of cache RAM, and 288 KB of ROM with embedded flash and Bluetooth LE stack). |
| |
Download Datasheet
Product Details | |
|
|
|
| Fully-Integrated V2X SoC for Day 1 and Future Day 2 Applications | |
V2X Module
from Autotalks
|
| The TEKTON3 from Autotalks is a V2X SoC that is designed for Day 1 and future Day 2 use cases. It has embedded Day 1 and Day 2 radios operating concurrently with both radios using two antennas with full transmit and receive diversity. The Day 1 radio supports either LTE-V2X (C-V2X Rel. 14/15) or DSRC and the Day 2 radio supports either 5G-V2X (C-V2X Rel. 16/17/18) or DSRC+ (IEEE802.11bd). |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5/6 GHz Band Wireless Connectivity Test Set for WLAN Devices | |
RF Test Set
from Anritsu
|
| The MT8862A from Anritsu is an Advanced One-Box Wireless Connectivity Set for WLAN testing that operates in the 2.4, 5, and 6 GHz bands. It is used to measure the Tx/Rx characteristics in WLAN (IEEE 802.11a/b/g/n/ac/ax/be) devices over a bandwidth from 20 to 160 MHz. This test set uses the network mode to conduct Tx power, modulation accuracy, and other parametric measurements in realistic operating conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 V/m Non-Hygroscopic Polystyrene Absorber from 80 MHz to 40 GHz | |
Microwave Absorber
from ETS-Lindgren
|
| The DuraSorb DS-750 from ETS-Lindgren is a Polystyrene Absorber for frequencies from 80 MHz to 40 GHz. It can handle an input CW incident plane wave power of 250 V/m or a CW power of 600 V/m for 5 minutes with a 10-minute cool-down period. This absorber is manufactured by injecting uniformly loaded lossy materials in predetermined geometric shapes to produce the desired performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface Mount Chip Equalizers from DC to 40 GHz | |
Gain Equalizer
from Smiths Interconnect
|
| The CEX Series from Smiths Interconnect are High-frequency Chip Equalizers that operate from DC to 40 GHz. These equalizers have a slope compensation range of 1 to 4 dB, slope linearity at ±0.25 dB, a VSWR of 1.5:1, and a low insertion loss of less than 1.25 dB. The equalizers can handle an input power of up to 0.25W. |
| |
Download Datasheet
Product Details | |
|
|
|
| High Power Frequency Source from 275 to 295 GHz | |
Frequency Synthesizer
from ACST GmbH
|
| The 1225D-SE from ACST GmbH is a mmWave Signal Source with a frequency range from 275 to 295 GHz. It has an integrated voltage-controlled oscillator (VCO) that can generate mmWave signals with an output power of +11 dBm. This signal source has V-tune ports to set the output signal frequency by tuning the voltage from 0.8 to 5 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ku-Band Block Up-Converter (BUC) from 13.75 to 14.5 GHz | |
Block Up Converter
from Amkom Design Group Inc
|
| The ASKU20 from Amkom is a Ku-Band Block Up-Converter (BUC) with an RF Frequency of 14 to 14.5 GHz (standard) or 13.75 to 14.5 GHz (extended). It delivers an output power of 43 dBm (20 W) and a linear power of 42 dBm (16 W). This feed-horn & boom-arm mountable BUC has an IF frequency of 950 to 1700 MHz and has GaAs + GaN high-power amplifiers with internal overdrive protection. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2.4 GHz Stamped Niche Antenna for IoT Applications | |
Antenna
from Abracon LLC
|
| The AANI-NI-0013 from Abracon is a Stamped Niche Antenna that operates from 2400 to 2500 MHz. This linearly-polarized antenna provides a peak gain of 3.2 dB with an efficiency of 76%. It is based on Abracon’s patented technology that delivers robust performance, even when employed in solutions requiring potting, coating, or over-mold. |
| |
Download Datasheet
Product Details | |
|
