| 4G & 5G New Products . |
|
|
| Mixed Signal Front-End Transceiver for 5G mmWave Applications | |
RF Transceiver
from Analog Devices
|
| The AD9088 from Analog Devices is a Highly Integrated Mixed Signal Front-End Transceiver. It is well suited for applications that require both wideband ADCs and DACs to process signal (s) having wide instantaneous bandwidth. This front-end consists of a 16-bit DAC with a sampling rate of 16 Giga Samples per second (GSPS) and a 12-bit ADC with a sampling rate of 8 GSPS. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Multi-Chip, Multi-Band System-in-Package for 5G Massive IoT Platforms | |
Cellular Module
from Sequans Communications
|
| The Monarch 2 from Sequans Communications is a Multi-Chip, Multi-Band System-in-Package (SiP) that supports 5G massive IoT (LTE-M/NB-IoT) platforms. It is based on the 2nd generation of Sequans’ Monarch LTE Cat M1/NB1/NB2 chipsets and consists of an entire front-end, transceiver, power management, RAM memory, crystals, and baseband modem for an LTE multi-band radio operating from 699 to 2200 MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3GPP Rel-17 Compliant Global 5G Module | |
Cellular Module
from Fibocom
|
| The FM190W-GL from Fibocom is a 5G Sub-6GHz and mmWave Module that is compliant with the 3GPP Release 17 standard. It delivers a downlink data rate of up to 10 Gbps and an uplink data rate of 3.38 Gbps. The FM190W-GL is based on the Qualcomm Snapdragon SDX75 chipset and has 8GB LPDDR4x RAM & 8GB Nand Flash supporting both 5G standalone (SA) and non-standalone (NSA) network architectures. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4G LTE Cat-1 bis IoT Module for EMEA and APAC Regions | |
Cellular Module
from Sierra Wireless
|
| The RC7120 from Sierra Wireless is an IoT Module that is optimized for 4G LTE Cat-1 bis applications. This fully integrated solution combines power efficiency with device-to-cloud security, making it fully optimized for cost-conscious IoT devices. It supports Dual SIM single standby (DSSS) for switching between networks quickly to stay connected. |
| |
Download Datasheet
Product Details | |
|
|
|
| Integrated Front-End Module for 3G, 4G/LTE and 5G-NR Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58260-11 from Skyworks is a Front-End Module for 5GNR, LTE, WCDMA, and CDMA applications. It consists of power amplifier (PA) blocks, single-ended duplexers, antenna, band select switches, and low noise amplifier (LNA). This module uses an enhanced architecture to cover multiple bands and meet the spectral linearity requirements of LTE QPSK, 16QAM, 64QAM, 256QAM modulations, and up to 100 resource block allocations. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Rohde & Schwarz | | | |
|
|
| LTE Cat-6 Grade Cellular Module for APAC and EMEA Regions | |
Cellular Module
from Cavli Wireless
|
| The C120GS from Cavli Wireless is an LTE Cat-6 Grade Cellular Module. It is based on 3GPP Release 10 (upgradable to Release 11) and delivers a downlink data rate of 300 Mbps and an uplink data rate of 50 Mbps. This module is suitable for use in Asia-Pacific (APAC) and EMEA regions and allows developers to add high-performance LTE data bandwidth to space-constrained designs quickly. |
| |
Download Datasheet
Product Details | |
|
|
|
| Omnidirectional Co-Linear Antenna from 27 to 29 GHz for 5G Applications | |
Antenna
from TMYTEK
|
| The ANT-COCO-2729-BEK28 from TMYTEK is a Coaxial Co-linear (COCO) Antenna that operates from 27 to 29 GHz. It has an omnidirectional beamwidth in the horizontal plane and a vertical 3 dB beamwidth of 25°. This antenna has a minimum return loss of 10 dB, cross-polarization of 20° and provides a gain of 7.5 dB. This antenna measures 66.5 (H) x 12.5 (Dia.) mm and has 2.92 mm (K-type) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Orthomode Transducers from 33 to 220 GHz for 5G/6G Test Applications | |
Orthomode Transducer
from Flann Microwave
|
| The Series 785 from Flann Microwave are Orthomode Transducers (OMTs) that operate from 33 to 220 GHz. They provide an isolation of 40 dB, have a cross-polarization of 35 dB, and an insertion loss of 1 dB. These OMTs are bi-directional that allow signals to be sent from, or received at, the rectangular ports via an antenna supporting dual polarization (at the common port). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 5G Sub-6 GHz Modules for IoT/eMBB/URLLC Applications | |
Cellular Module
from Quectel
|
| The RM500U Series from Quectel are 5G Sub-6 GHz Modules that are optimized for IoT/eMBB/URLLC applications. They deliver a data rate of 2.6 Gbps (DL) and 1 Gbps (UL). These modules are available in three variants: RM500U-CN, RM500U-EA and RM500U-CNV to provide worldwide 5G (standalone and non-standalone architecture) and LTE-A coverage. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Gain Pre-Driver Amplifier for 5G mMIMO from 3.3 to 4.2 GHz | |
RF Amplifier
from Qorvo
|
| The QPA9822 from Qorvo is a Linear Pre-Driver Amplifier that operates from 3.3 to 4.2 GHz. It provides a gain of 39 dB with a noise figure of 4.5 dB and has an output P1dB of 28 dBm. This amplifier is designed to handle wideband 5G NR instantaneous signal bandwidths, making it ideal for m-MIMO applications. It has external bias control capability for linearity optimization, a DC power shutdown feature and fast Enable/Disable for TDD operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 dB Fixed Attenuator from DC to 50 GHz for 5G Applications | |
Fixed Attenuator
from MECA
|
| The 669-10-1 from MECA is a Fixed Attenuator that operates from DC to 50 GHz. It provides an attenuation of 10 dB with an attenuation accuracy of ±0.5 dB. The attenuator can handle an input power of up to 0.5 W and has a VSWR of less than 1.75:1. It is available as a RoHS-compliant module with 2.4 mm male/female connectors and is designed for 5G applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Channel Receiver Front-End Module from 1.8 to 2.8 GHz | |
Front End Module
from iCana
|
| The ARQSF1828-RX-A from iCana is a Dual-channel, Receiver Front-End Module that operates from 1.8 to 2.8 GHz. Each channel of this FEM consists of a silicon SPDT switch and a two-stage GaAs LNA with bypass. The LNA provides high and low gain modes with a noise figure of 1.3 dB and the SPDT switch can handle an input power of up to 12 W with 10 dB PAR. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 7 GHz Wireless Connectivity Test Set for Wi-Fi 7 and Cellular 5G Networks | |
RF Test Set
from Keysight Technologies
|
| The E7515W from Keysight Technologies is a UXM Wireless Connectivity Test Platform. It has been designed to support Wi-Fi-to-Cellular internetworking testing of both Wi-Fi clients (STAs) and access points (APs) from 380 MHz to 7.125 GHz (frequency resolution of 1 Hz). This test platform adds support for Wi-Fi 7 testing and enables advanced Wi-Fi/cellular co-existence testing and unique testing of 5G fixed wireless access (FWA) devices. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
