| New RF and Microwave Products this Week . |
|
|
| 20 & 30 dB Attenuators from DC to 2.3 GHz | |
Fixed Attenuator
from Inmet by Spectrum Control
|
| The 2KNA150 from Inmet by Spectrum Control are high power attenuators that operate from DC to 2.3 GHz. They are available with attenuation values of 20 & 30 dB and can handle up to 150 W of input power. These surface mount attenuators can be used in mobile networks, high power amplifiers and other military and commercial applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 6 GHz Watertight UV-Resistant Cable | |
RF Cable
from Times Microwave Systems
|
| The LMR-195-DB from Times Microwave Systems is an RF Cable that operates up to 6 GHz. It has an outer diameter of 4.953 mm and a minimum bend radius of 12.7 mm (installation) and 50.8 mm (repeated). This UV-resistant cable offers better bending and handling capabilities compared to smooth wall or corrugated hard-line cables. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact USB VNA from 9 kHz to 8.5 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The S5085 is a 2-Port Vector Network Analyzer from Copper Mountain Technologies that operates from 9 KHz to 8.5 GHz. It can measure all four S parameters S11, S12, S21, S22 and provides a wide variety of analysis capabilities, including time-domain with gating and frequency offset modes. This lab grade VNA is available in a compact package and can be controlled with a Windows or Linux based PC, laptop, tablet, or x86 board computer connected to the measurement hardware via a USB interface. |
| |
Download Datasheet
Product Details | |
|
|
|
| Real-Time True Average Power Sensor from 4 kHz to 18 GHz | |
RF Power Meter & Sensor
from Boonton
|
| The RTP4118 from Boonton is a Real-Time True Average Power Sensor that operates from 4 kHz to 18 GHz. It has a dynamic range from -60 to +20 dBm and a continuous sampling rate of 25 MHz. The sensor uses Real-Time Power Processing (RTPP) technology which is a unique parallel processing methodology that performs power measurement at unmatched speeds. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Channel 60 dB Digital Attenuator from 200 to 8000 MHz | |
RF Variable Attenuator
from Vaunix
|
| The LDA-608V-2 from Vaunix is a 2-channel Digital Attenuator that operates from 200 to 8000 MHz. It has 2 independently controlled attenuator paths which provide an attenuation range of 60 dB in 0.1 dB steps (minimum) and has a switching speed of 15 µs. The attenuator can handle an input power of up to 23 dBm and has an insertion loss of less than 8 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| IF to Antenna Transceiver from 25 to 29 GHz for FWA Applications | |
RF Transceiver
from mmTron Inc
|
| The TMC178169252 from mmTron is an IF to antenna transceiver solution that operates from 25 to 29 GHz. It has an IF frequency range from 5 to 7 GHz and an LO frequency of 6 to 8 GHz. This transceiver solution combines a mixer (TMC178), a GaN amplifier (TMC169) and a front-end module (TMC252). It delivers an EIRP of +63 dBi with a transmit gain of 25 dB and an output power (Tx) of 37 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Downconverter from 2 to 18 GHz | |
Down Converter
from Crane Aerospace & Electronics
|
| The Downconverter from Crane Aerospace is a Downconverter that operates from 2 to 18 GHz. It has an IF frequency from 3 to 5 GHz and delivers a noise figure of 11 dB with an attenuation range of 25 dB (0.5 dB step). This down-converter incorporates advanced features such as integrated sub-band filtering, amplification and attenuation within the package. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 W, 10-Way Radial Power Divider from DC to 7.2 GHz | |
Power Divider
from Werbel Microwave
|
| The WMRD10-7.2-S from Werbel Microwave is a 10-way Power Divider that operates from DC to 7.2 GHz. It can handle an input power of up to 1 W, provides an isolation of up to 34 dB and has an insertion loss of less than 21.9 dB. This resistive power divider has a unique design that accomplishes flat frequency response in a small radial package. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 10 dB Fixed Attenuator from DC to 50 GHz for 5G Applications | |
Fixed Attenuator
from MECA
|
| The 669-10-1 from MECA is a Fixed Attenuator that operates from DC to 50 GHz. It provides an attenuation of 10 dB with an attenuation accuracy of ±0.5 dB. The attenuator can handle an input power of up to 0.5 W and has a VSWR of less than 1.75:1. It is available as a RoHS-compliant module with 2.4 mm male/female connectors and is designed for 5G applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W CW/Pulsed Solid-State Power Amplifier from 6 to 18 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2033-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 6 to 18 GHz. It delivers a CW/Pulsed saturated output power of more than 100 W with a power gain of over 50 dB. The amplifier has built-in protection circuits with optional monitoring parameters for forwarding/Reflected power, VSWR, voltage, current & temperature sensing for superb reliability and ruggedness. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 W, Class A/AB Solid-State Power Amplifier from 18 to 26.5 GHz | |
RF Amplifier
from Advanced Amplifiers
|
| The AA-1826G-200 from Advanced Amplifiers is a Solid-State Power Amplifier (SSPA) that operates from 18.0 to 26.5 GHz. It delivers a saturated output power of more than 200 W with more than 53 dB of gain. This SSPA has a Class A/AB linear design, offering high efficiency with excellent reliability and ruggedness. It has spurious levels of -20 dBc and harmonics of -30 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Compact Antenna Test Range from 18 to 330 GHz for OTA Measurements | |
Antenna Measurement System
from Milliwave Silicon Solutions
|
| The MBX32CTR from Millibox is a mmWave & sub-THz compact antenna test range that operates 18 to 330 GHz. It has been designed to fit on a 6-foot lab bench and measures 161 x 112 x 83 cm. This compact chamber is suitable for mmWave and sub-THz OTA measurement with a quiet zone of 150mm. The MBX32CTR test range includes an MBX32 chamber, a GIM04H-300E 2-axis positioner, a laser alignment system, a 300mm parabolic reflector, and a focus probe antenna. |
| |
Download Datasheet
Product Details | |
|
|
|
| 14 dB Coaxial Circulator from 1 to 2 GHz | |
RF & Microwave Circulator
from Scientific Microwave Corporation
|
| The 1-2 GHz Coax Circulator from Scientific Microwave Corporation is a 3-Port Circulator that operates from 1 to 2 GHz. It can handle a peak input power of 20 kW and a VSWR of 1.5:1. This circulator has an insertion loss of 0.6 dB and provides an isolation of 14 dB. It is available in a metallic enclosure that measures 29.88 x 25.89 inches and has N-Type (Female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| WR-10 GaAs Balanced Mixer from 75 to 110 GHz | |
Waveguide Mixer
from HASCO Components
|
| The HWMX10-SFW from Hasco is a Waveguide Balanced Mixer with an RF/LO frequency range from 75 to 110 GHz and an IF frequency range from 0.1 to 10 GHz. It requires an LO drive power of 10 dBm and provides a conversion loss of 9.5 dB with an LO to IF isolation of 20 dB. This mixer utilizes the best performance GaAs Schottky beam-lead diodes, and it can be used both as an up-converter or down-converter. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Q Square Air Core Inductors from 47 to 82 nH | |
RF Inductor
from Coilcraft
|
| The 151SQ from Coilcraft are Square Air Core Inductors with inductance values of 47 nH, 68 nH, and 82 nH. They have very high quality factors with tight inductance tolerances, making them suitable for narrowband RF amplifier matching and tuning applications. These inductors utilize air as the magnetic core, resulting in high Q-factor and lowest possible losses at high frequencies. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Cavity Bandpass Filter with a Passband from 9400 to 10100 MHz | |
Band Pass Filter
from Networks International Corporation
|
| The 9750 MHz Surface Mount Cavity Filter from Networks International Corporation (NIC) has a passband from 9400 to 10100 MHz. It has a passband insertion loss of less than 1 dB and provides an out-of-band rejection of more than 60 dBc. This X-Band filter is built with high-temperature solder (Sn95Sb05), making it well-suited to withstand standard PCB reflow profiles up to 215°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W Dual-Channel Bidirectional Amplifier from 2.2 to 2.5 GHz | |
RF Amplifier
from NuWaves RF Solutions
|
| The NuPower Xtender DUAL-S-50-C01-S01 from NuWaves RF Solutions is a Dual-Channel Bidirectional Amplifier (BDA) that operates from 2200 to 2500 MHz. On the Tx side, this amplifier delivers a saturated output power of 47 W with a gain of 17 dB while on the Rx side, it provides a gain of 12 dB and has a noise figure of 2.5 dB. This BDA is suitable for extending the range of communications and datalinks for ISR applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Phase-Locked Voltage Controlled Oscillators (PLVCO) from 10 MHz to 32 GHz | |
Voltage Controlled Oscillator
from Luff Research, an Ironwave Technologies Company
|
| The PLVCO Series from Luff Research are Phase-Locked Voltage Controlled Oscillators from 10 MHz to 32 GHz. They provide an output power of more than +13 dBm with a variation of 2 dB and a phase noise of -140 dBc/Hz (at 1 MHz offset). These PLVCO’s can be configured to operate with either an external reference from 10 to 100 MHz or an internal TCXO (±0.5 PPM). |
| |
Download Datasheet
Product Details | |
|
|
|
| 8 to 150 MHz OCXO with HCMOS and Sine Waveforms | |
OCXO
from Dynamic Engineers
|
| The OCXO3318AW from Dynamic Engineers is a high stability miniature OCXO that operates from 8 to 150 MHz. It has a phase noise of -172 dBc/Hz @100 kHz and a frequency stability of ± 5 ppb over a temperature range from -40 to 85 degrees Celsius. This OCXO provides HCMOS (TTL) and Sine waveforms at the output while operating on a supply voltage of 3.3 and 5 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W Microstrip Isolator from 34.5 to 35.6 GHz for Radar Applications | |
RF & Microwave Isolator
from JQL Electronics
|
| The JIS34K5T35K6G0C from JQL Technologies is a Microstrip Isolator that operates from 34.5 to 35.6 GHz. It can handle a CW input power of 2 W, provides more than 19 dB of isolation and has an insertion loss of less than 1.2 dB. This Ka-band isolator is extremely stable over the temperature range of -40°C to +70°C. It is available in a surface-mount package that measures 5.0 x 5.0 x 1.2 mm and is ideal for radar applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15 W GaN MMIC Power Amplifier from 13.75 to 14.5 GHz | |
RF Amplifier
from Qorvo
|
| The QPA0016 from Qorvo is a GaN MMICPower Amplifier that operates from 13.75 to 14.5 GHz. It delivers an output power of 15 W (~42 dBm) with a small signal gain of 35 dB and a power-added efficiency (PAE) of 32%. This amplifier is fabricated using Qorvo's production 0.15 µm GaN-on-SiC process (QGaN15) and has third-order intermodulation distortion products of 25 dBc. |
| |
Download Datasheet
Product Details | |
|
