| New T&M Products . |
|
|
| Compact Antenna Test Range from 18 to 330 GHz for OTA Measurements | |
Antenna Measurement System
from Milliwave Silicon Solutions
|
| The MBX32CTR from Millibox is a mmWave & sub-THz compact antenna test range that operates 18 to 330 GHz. It has been designed to fit on a 6-foot lab bench and measures 161 x 112 x 83 cm. This compact chamber is suitable for mmWave and sub-THz OTA measurement with a quiet zone of 150mm. The MBX32CTR test range includes an MBX32 chamber, a GIM04H-300E 2-axis positioner, a laser alignment system, a 300mm parabolic reflector, and a focus probe antenna. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| High Purity Signal Generators from 9 kHz to 54 GHz | |
Signal Generator
from AnaPico
|
| The APLC Series from Anapico are 1 to 4 channel high purity signal generators that operate from 9 kHz to 12.75, 20, 40 and 54 GHz. They are ideally suited for a wide range of applications, where good signal quality, accurate and wide output power ranges, and very stable phase coherence among all channels are required. These signal generators have a high-stability OCXO reference that provides excellent frequency accuracy and stability. |
| |
Download Datasheet
Product Details | |
|
|
|
| True-RMS Thermal RF Power Sensor from 9 kHz to 67 GHz | |
RF Power Meter & Sensor
from LadyBug Technologies
|
| The LB5967L from LadyBug Technologies is a True-RMS Power Sensor that operates from 9 kHz to 67 GHz. It can handle an average continuous input power of 18 dBm (~63 mW), a peak input pulsed power of 2 W and has a dynamic range of -50 dBm to +18 dBm. This sensor utilizes a high accuracy, thermally stabilized, two-path, RMS responding, square law diode detection scheme that can accurately measure any signal regardless of modulation bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB / Ethernet Portable RMS Power Sensor from 50 MHz to 18 GHz | |
RF Power Meter & Sensor
from Mini Circuits
|
| The PWR-18RMS-RC from Mini-Circuits is an RMS Power Sensor that operates from 50 MHz to 18 GHz. It can detect input signals from -60 dBm to +20 dBm and supports the measurement of CW, modulated, pulsed, and multi-tone signals along with wideband digital modulations (including Wi-Fi devices). This power sensor has Ethernet (RJ45) and USB Type-C control interfaces and has an integrated LCD screen that provides a convenient local read-out to the operator of power measurements and key settings. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact Signal Generator from 25 to 3000 MHz | |
Signal Generator
from ETL Systems
|
| The SG03-840002 from ETL Systems is a Miniature Signal Generator that operates from 25 to 3000 MHz covering L, S and C frequency bands. It delivers an output power of –17 dBm to +13 dBm in 0.5 dB steps and has a frequency step size of 100 Hz. This signal generator has spurious levels of less than -70 dBc and harmonics of -25 dBc with a phase noise of less than -112 dBc/Hz (@100 KHz offset). |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Rohde & Schwarz | | | |
|
|
| Real-Time Spectrum Analyzer from 9 kHz to 18 GHz | |
RF Spectrum Analyzer
from Aaronia AG
|
| The SPECTRAN V6 ECO 100XA-18 from Aaronia AG is a Real-Time Spectrum Analyzer that operates from 9 kHz to 18 GHz. It has a real-time bandwidth of 60 MHz and a DANL of -170 dBm/Hz. This spectrum analyzer has a sweep speed of 500/3000 GHz/s and can scan 6 GHz in less than 2 ms (3 THz/s) with an FFT rate of 960 Million FFT-points/s (120 Million FFTs/s). |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 GHz Benchtop Power Meter with Four USB Controlled Power Sensors | |
RF Power Meter & Sensor
from Boonton
|
| The PMX40 from Boonton is an RF Power Meter that operates from 4 kHz to 40 GHz. Its intuitive, multi-touch display enables fast configuration of up to four USB sensors as well as easy access to measurement and analysis tools, providing a standalone solution for capturing, displaying, and analyzing peak and average RF power in both the time and statistical domains. |
| |
Download Datasheet
Product Details | |
|
|
|
| Handheld Cable and Antenna Analyzer from 5 kHz to 6 GHz | |
RF Spectrum Analyzer
from Anritsu
|
| The Site MasterTM MS2089A from Anritsu is a Handheld Cable and Antenna Analyzer with a frequency range of 5 kHz to 6 GHz. It has cable and antenna spectrum analysis and monitoring capabilities that together offer a complete test solution for industry professionals. This cable analyzer has a dynamic range of more than 105 dB and a displayed average noise level (DANL) of -167 dBm with a sweep speed of 45 GHz/s. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact, USB-Powered Real-Time Spectrum Analyzer from 9 kHz to 6.3 GHz | |
RF Spectrum Analyzer
from HAROGIC Technologies
|
| The SAM-60 M3 from HAROGIC Technologies is a Real-Time Spectrum Analyzer with a frequency range from 9 kHz to 6.3 GHz. It has an analysis bandwidth of up to 100 MHz with a spectrum sweep speed of 300 GHz/sec and utilizes FPGA signal processing. This spectrum analyzer is equipped with a preamplifier to achieve a Display Average Noise Level (DANL) of -166.6 dBm/Hz (at 1 GHz) and has an SSB phase noise of -134.1 dBc/Hz (at 1 MHz offset, 500 MHz carrier frequency). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 4/8 Channel Oscilloscopes with up to 3 GHz Bandwidth | |
Oscilloscope
from Pico Technology
|
| The PicoScope 6000E Series from Pico Technology are Oscilloscopes with a bandwidth of up to 3 GHz. They are available with 4 (up to 3 GHz) or 8 (up to 500 MHz) analog channels and support up to 16 digital MSO channels. These oscilloscopes deliver a sampling rate of up to 10 GS/s and have a 200 ms capture time at 5 GS/s with up to 4 GS capture memory. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Rohde & Schwarz | | |
|
|
| Software Defined Spectrum Analyzer from 400 MHz to 3 GHz for Remote Spectrum Monitoring | |
RF Spectrum Analyzer
from Avcom
|
| The EVO-RSA-3040A from AVCOM is a Rack-Mount Spectrum Analyzer for remote spectrum monitoring of L-band signals from 400 to 3000 MHz. It has been designed for the measurement and analysis of communications and broadcast carriers, making Satcom link, L-Band carriers, easy to measure, monitor, and record. The EVO-RSA provides excellent uplink, downlink frequency and amplitude accuracy along with resolution bandwidth (RBW) selection from 1kHz to 1MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Non-Blocking 4x4 Solid-State Switch Matrix from 100 kHz to 4 GHz | |
Switch Matrix
from Becker Nachrichtentechnik GmbH
|
| The RSWM-4X4LR from Becker RF is an 4x4 Switch Matrix that operates from 100 kHz to 4 GHz. It has four inputs and four outputs interconnected via a non-blocking matrix where a single input can route to multiple outputs simultaneously. This switch matrix has high channel isolation to ensure that signals in adjacent radio channels do not affect each other. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30.4 TB, 2 Channel RF Recorder from 30 MHz to 26.5 GHz | |
RF Spectrum Recording and Playback System
from Spectra Lab
|
| The Model 3863 from Spectra Lab is an RF Record and Playback Instrument that can capture and reproduce RF signals from 30 MHz to 26.5 GHz. It features two RF channels that enable the simultaneous recording and playback of two RF input/output channels. This instrument has an instantaneous bandwidth (IBW) of 1 GHz and supports 1 GHz/channel continuous IQ streaming & 2 GHz/channel short-duration IQ capture/generation. |
| |
Download Datasheet
Product Details | |
|
|
|
| D-Band VNA Frequency Extender for Test Labs from 110 to 170 GHz | |
Vector Network Analyzer Extender
from ERAVANT
|
| The STO-0609300-CM-E1 from ERAVANT is a Vector Network Analyzer (VNA) Frequency Extender that operates in the D-Band from 110 to 170 GHz. It supports input frequencies from 4.58 to 7.08 GHz and integrates a precision micrometer adjustable attenuator with a tuning range of 30 dB. This frequency extender is compatible with Copper Mountain Technologies (CMTs) CobaltFx VNAs and achieves full 1-port, S-parameter testing over the operating frequency range. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ultra-Low Noise RF Signal Generator from 3 to 10/20 GHz | |
Signal Generator
from QuSinus
|
| The PureWave from QuSinus is an ultra-low noise signal generator with a frequency range from 3 to 10 GHz (20 GHz Optional). It has an output power range from -10 to +10 dBm and a phase noise of -160 dBc/Hz (at 100 kHz offset, 10 GHz frequency). This signal generator achieves a precision in time interval measurement that surpasses conventional standards by orders of magnitude. |
| |
Download Datasheet
Product Details | |
|
|
|
| Handheld Combination Analyzer from 3 kHz to 10 GHz | |
RF Spectrum Analyzer
from Keysight Technologies
|
| The FieldFox N9915C from Keysight Technologies is a lightweight, durable software-defined cable and antenna analyzer, spectrum analyzer, network analyzer, signal generator and more. The required configuration can be configured using software. This combination analyzer has a frequency range from 3 kHz to 10 GHz. This handheld analyzer can capture signals with up to 120 MHz gap-free, real-time bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| RF Shielding Test Enclosure from 1 to 6 GHz | |
RF Shielded Test Enclosure
from LabiFix Innovations
|
| The LBX4050 from Labifix is a rack-mountable RF shielding test enclosure that operates from 1 to 6 GHz. It provides a shielding effectiveness of 85 to 95 dB and has inner dimensions of 22 x 15 x 20 inches. The high-performance RF absorber lining ensures excellent shielding performance. This test chamber allows for the testing of multiple devices simultaneously and offers a customizable I/O panel with interchangeable connectors, enabling easy replacement of standard I/O if required. |
| |
Download Datasheet
Product Details | |
|
|
|
| 32-bit Versatile Antenna Measurement Software | |
Software
from NSI-MI Technologies
|
| The NSI2000 from NSI-MI Technologies is an Antenna Measurement Software. It is a 32-bit multi-tasking Windows® 10 application that provides an excellent array of features that take advantage of the recent advances in operating system technologies. This software includes a 3D viewer to inspect planar, cylindrical, and spherical near-field and far-field data in a 3D dynamic mode. |
| |
Download Datasheet
Product Details | |
|
