| New RF and Microwave Products this Week . |
|
|
| Integer-N/Fractional-N PLL Synthesizer from 1 to 10 GHz | |
Frequency Synthesizer
from Analog Devices
|
| The ADF41510 from Analog Devices is an Integer-N/Fractional-N PLL Synthesizer that operates from 1 to 10 GHz. It is designed for implementing local oscillators (LOs) up to 10 GHz in the upconversion and downconversion sections of wireless receivers and transmitters. This synthesizer has a phase frequency detector (PFD) frequency of 250 MHz (Integer-N) & 125 MHz (fractional-N) with a phase noise of -235 dBc/Hz (Integer-N) & -231 dBc/Hz (fractional-N). |
| |
Download Datasheet
Product Details | |
|
|
|
| Ultra Low Noise RF Signal Generator from 3 to 10/20 GHz | |
Signal Generator
from QuSinus
|
| The Ultra-low noise PureWave Signal Generator from QuSinus operates at a frequency range from 3 to 10 GHz (20 GHz Optional). It has an output power range from -10 to +10 dBm (can be extended from –70 to +18 dBm) and a phase noise of -160 dBc/Hz (at 100 kHz offset, 10 GHz frequency). This signal generator has been meticulously designed to deliver excellent signal purity and frequency stability making it ideal for broad range of measurement applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| True-RMS Thermal RF Power Sensor from 9 kHz to 67 GHz | |
RF Power Meter & Sensor
from LadyBug Technologies
|
| The LB5967L from LadyBug Technologies is a True-RMS Power Sensor that operates from 9 kHz to 67 GHz. It can handle an average continuous input power of 18 dBm (~63 mW), a peak input pulsed power of 2 W and has a dynamic range of -50 dBm to +18 dBm. This sensor utilizes a high accuracy, thermally stabilized, two-path, RMS responding, square law diode detection scheme that can accurately measure any signal regardless of modulation bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
| Silicon Dioxide Based Semi-Rigid Coaxial Cable Assemblies for Space Applications | |
RF Cable
from Times Microwave Systems
|
| The SiO2 Series from Times Microwave Systems are Silicon Dioxide based based Semi-Rigid cables that operate up to 64 GHz. These phase-stable cable assemblies are designed to operate at extreme temperatures and in high radiation environments making them ideal for use in Space. Compared to other cable types, SiO2 cables provide exceptionally low hysteresis, with phase and loss values returning to the same values at a given temperature even after extreme excursions. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4x4 Butler Matrix from 18 to 40 GHz | |
Butler Matrix
from KRYTAR
|
| The KBM9180400 from KRYTAR is a 4x4 Butler Matrix that operates from 18 to 40 GHz. It provides an isolation of more than 12 dB, has an insertion loss of less than 12 dB, and a VSWR of up to 2:1. This butler matrix has an amplitude balance of ±1.3 dB and a phase balance of ±15°. It is available in a module that measures 3.68 x 2.80 x 0.81 inches and has 2.4 mm (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Channel Digital Attenuator from 200 MHz to 8 GHz for Wi-Fi 6E Applications | |
RF Variable Attenuator
from Vaunix
|
| The LDA-908V-2 from Vaunix is a 2-Channel Digital Attenuator that operates from 200 to 8000 MHz. It can provide up to 90 dB of attenuation in 0.1 dB steps with an attenuation accuracy of 0.25 dB. This attenuator has 2 independently controlled attenuator paths and offers easy programmability for fixed attenuation, sweep attenuation ramps, and fading profiles directly from the included Windows or macOS GUI. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15 W GaN MMIC Power Amplifier from 13.75 to 14.5 GHz | |
RF Amplifier
from Qorvo
|
| The QPA0016 from Qorvo is a GaN MMICPower Amplifier that operates from 13.75 to 14.5 GHz. It delivers an output power of 15 W (~42 dBm) with a small signal gain of 35 dB and a power-added efficiency (PAE) of 32%. This amplifier is fabricated using Qorvo's production 0.15 µm GaN-on-SiC process (QGaN15) and has third-order intermodulation distortion products of 25 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 mm Top-Launch Connector with Compression Contact | |
RF Connector
from Signal Microwave
|
| The TLF50 from Signal Microwave is a 2.40 mm Top-Launch Connector that operates up to 50 GHz. It transitions to a microstrip or grounded coplanar line on the top layer of the board. This connector has a compression contact and requires no soldering. The signal in this connector does not need to travel through the board vias and provides edge-launch-type performance anywhere on the board. |
| |
Download Datasheet
Product Details | |
|
|
|
| Coaxial Circulator from 1 to 2 GHz | |
RF & Microwave Circulator
from Scientific Microwave Corporation
|
| The 1-2 GHz Coax Circulator from Scientific Microwave Corporation is a 3-Port Circulator that operates from 1 to 2 GHz. It can handle a peak input power of 20 kW and a VSWR of 1.5:1. This circulator has an insertion loss of 0.6 dB and provides an isolation of 14 dB. It is available in a metallic enclosure that measures 29.88 x 25.89 inches and has N-Type (Female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| MMIC Low Noise Amplifier from 300 MHz to 4 GHz | |
RF Amplifier
from Teledyne e2v HiRel Electronics
|
| The TDLNA0840SEP from Teledyne e2v HiRel Electronics is a Low-Noise Amplifier (LNA) that operates from 0.3 to 4 GHz. It provides a gain of 29 dB with a noise figure of less than 1.5 dB. This unconditionally-stable LNA is developed on a 150 nm, enhancement mode, pHEMT process and is ideal for use in high-reliability applications where ultra-low power consumption, low noise figure, and small package footprint are critical. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| RF Record and Playback System from 30 MHz to 26.5 GHz | |
RF Spectrum Recording and Playback System
from Spectra Lab
|
| The Model 3863 from Spectra Lab is an RF Record and Playback Instrument that can capture and reproduce RF signals from 30 MHz to 26.5 GHz. It features two RF channels that enable the simultaneous recording and playback of two RF input/output channels. This instrument has an instantaneous bandwidth (IBW) of 1 GHz and supports 1 GHz/channel continuous IQ streaming & 2 GHz/channel short-duration IQ capture/generation. |
| |
Download Datasheet
Product Details | |
|
|
|
| GaAs Schottky Diode RF Limiter from DC to 30 GHz | |
Limiter
from Marki Microwave
|
| The HLM-70CSP2 from Marki Microwave is a GaAs Schottky Diode Signal Limiter that operates from DC to 30 GHz. It has an insertion loss of 0.5 dB and a return loss of 21 dB. This signal limiter can handle an input IP3 power of 32 dBm and has a flat leakage of 13 to 18 dBm. It is available in a plastic surface mount chip scale package that measures 2.50 x 2.50 x 0.90 mm. |
| |
Download Datasheet
Product Details | |
|
|
| Featured Interview | | Interview with Brandon Malatest from Per Vices Corporation | | everything RF recently interviewed Brandon Malatest who is the COO and co-founder of Per Vices Corporation, a leader in Software Defined Radio technology. Brandon has an honour’s degree in Physics with a specialization in Experimental Physics from the University of Waterloo in Ontario, Canada. On graduating, Brandon started his career as a research analyst and statistician at one of the largest market research firms in Canada and later joined Victor Wollesen to co-found Per Vices. Click here to read the full Interview. | | | |
|
|
|
|
|
|
|
| 4-Channel USB Solid-State Programmable Attenuator from 200 MHz to 6 GHz | |
RF Variable Attenuator
from JFW Industries
|
| The 50P-2089 from JFW Industries is a 4-Channel USB-Based Solid-State Programmable Attenuator that operates from 200 to 6000 MHz. It has an attenuation range from 0 to 95 dB with 1 dB steps. This variable attenuator has an insertion loss of less than 8.3 dB and a VSWR of up to 2.0:1. All four channels can be independently controlled via a USB type-C interface and is also compatible with Python, C#, PuTTY (any development tool with COM port interfacing) test software programs. |
| |
Download Datasheet
Product Details | |
|
|
|
| D-Band VNA Frequency Extender for Test Labs from 110 to 170 GHz | |
Vector Network Analyzer Extender
from ERAVANT
|
| The STO-0609300-CM-E1 from ERAVANT is a Vector Network Analyzer (VNA) Frequency Extender that operates in the D-Band from 110 to 170 GHz. It supports input frequencies from 4.58 to 7.08 GHz and integrates a precision micrometer adjustable attenuator with a tuning range of 30 dB. This frequency extender is compatible with Copper Mountain Technologies (CMTs) CobaltFx VNAs and achieves full 1-port, S-parameter testing over the operating frequency range. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 W GaN-on-SiC Power Amplifier from 20 to 1000 MHz | |
RF Amplifier
from RFHIC
|
| The RWP05040-10 from RFHIC Corporation is a GaN-on-SiC Power Amplifier that operates from 20 to 1000 MHz. It delivers a saturated output power of 40 W with a small signal gain of more than 36 dB. This amplifier is designed using RFHIC’s GaN-on-SiC high-electron-mobility transistors (HEMT), providing high breakdown voltage, efficiency, and lower thermal dissipation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 9.43 GHz Combline Bandpass Filter | |
Band Pass Filter
from Quantic PMI (Planar Monolithics)
|
| The CL9D43-300-CD-SFF from Quantic PMI is a Combline Bandpass Filter with a center frequency of 9.43 GHz. It has a 3dB bandwidth of over 300 MHz with a passband VSWR of less than 1.5:1 and more than 40 dB of rejection. It is available in a package that measures 2.25 x 0.40 x 0.50 inches and has SMA female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 W RF Termination from DC to 4 GHz | |
Termination
from MECA
|
| The 417-17WWP from MECA is an RF termination that operates from DC to 6 GHz. It is matched to 50 ohms and can handle an average power of 10 W and a peak power of 2 kW. This termination has a VSWR of less than 1.30:1 and can operate at a temperature range of -55 to 85 degrees Celsius. It is available as an aluminum-housed module that measures 3.15 inches (L) x 1.25 inches (Dia.) and has a 4.3/10.0-female connector. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 W V-Band TWTA for Satellite Uplink Applications | |
SATCOM Amplifier System
from Communications & Power Industries
|
| The TL02VO-A1 from Communications & Power Industries (CPI) is a Traveling Wave Tube Amplifier (TWTA) that operates in the V-band from 47.2 to 52.4 GHz. It delivers a TWT output power of 250 W and a flange output power of 200 W, with a gain of over 60 dB. Mounted at the antenna, it enhances performance by reducing IFL losses and cutting system design costs making it ideal for fixed earth station applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Phase Noise TCXO from 8 to 60 MHz for Microwave Applications | |
TCXO
from Dynamic Engineers
|
| The TCXO5300AX from Dynamic Engineers is a Temperature Controlled Crystal Oscillator (TCXO) that operates from 8 to 60 MHz. It provides clipped Sinewave or CMOS/TTL output waveforms with an SSB phase noise of -138 dBc/Hz (1 kHz offset) and has a frequency stability of ±0.28 ppm (vs. temperature). This TCXO is suitable for applications where excellent frequency stability and timing are required. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wideband Data Link Digital Transceiver from 1350 to 4990 MHz | |
Data Link
from L3Harris Technologies
|
| The BANDIT 2x from L3Harris Technologies is a Data Link Digital Transceiver that operates in the L, S, and C-Bands from 1350-1850 MHz, 2025-2500 MHz, and 4400-4990 MHz. It is a low-cost, lightweight and all-in-one solution that provides wideband capability to a wide variety of applications. This tri-band transceiver delivers real-time IP-based, full motion digital video for situational awareness, targeting, battle damage assessment, surveillance, video broadcast, remote sensors, convoy operations, and other situations where high resolution video is required. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Shielding Test Enclosure from 1 to 6 GHz | |
RF Shielded Test Enclosure
from LabiFix Innovations
|
| The LBX4050 from Labifix is a rack-mountable RF shielding test enclosure that operates from 1 to 6 GHz. It provides a shielding effectiveness of 85 to 95 dB and has inner dimensions of 22 x 15 x 20 inches. The high-performance RF absorber lining ensures excellent shielding performance. This test chamber allows for the testing of multiple devices simultaneously and offers a customizable I/O panel with interchangeable connectors, enabling easy replacement of standard I/O if required. |
| |
Download Datasheet
Product Details | |
|
