| Featured Products this Week . |
|
|
| 2-Way Power Divider from 0.5 to 26.5 GHz | |
Power Divider
from Werbel Microwave
|
| The WM2PD-0.5-26-S from Werbel Microwave is a 2-way Power Divider that operates from 0.5 to 26.5 GHz. It can handle a CW input power of up to 10 W, provides an isolation of more than 14 dB, and has an insertion loss of less than 2.3 dB. This power divider has an amplitude balance of ±0.24 dB and a phase balance of ±6°. It exhibits an excellent VSWR performance over an operating temperature range from -55°C to +85°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 W GaN-on-SiC Power Amplifier Pallet from 20 to 450 MHz | |
RF Amplifier
from RFHIC
|
| The RWS03020-11 from RFHIC is a GaN-on-SiC Power Amplifier Pallet that operates from 20 to 450 MHz. It delivers a P1dB power of 10 W (~40 dBm) and a small signal gain of 40 dB with a variation of ± 1.5 dB. This amplifier is fabricated using GaN-on-SiC technology and is mounted on an aluminum sub-carrier with full in/out matching for broadband operation. It also offers improved thermal handling based on patented technology and supports an external heatsink. |
| |
Download Datasheet
Product Details | |
|
|
|
| Broadband RF Balun from 500 kHz to 100 GHz | |
Balun
from HYPERLABS
|
| The HL9409 from Hyperlabs is an RF Balun that operates from 500 kHz to 100 GHz. It can handle an input power of up to 1 W (30 dBm) and has an insertion loss of 6.5 dB. This 50-ohm balun has an amplitude balance of ±0.5 dB and a phase balance of ±15° at 80 GHz. It employs attenuators to improve isolation when the device is used as a signal combiner using differential signals with unmatched source impedance. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| High-Q Square Air Core Inductors from 47 to 82 nH | |
RF Inductor
from Coilcraft
|
| The 151SQ from Coilcraft are Square Air Core Inductors with inductance values of 47 nH, 68 nH, and 82 nH. They have very high quality factors with tight inductance tolerances, making them suitable for narrowband RF amplifier matching and tuning applications. These inductors utilize air as the magnetic core, resulting in high Q-factor and lowest possible losses at high frequencies. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 67 GHz Flexible, Colour-Coded VNA Test Cable Assemblies | |
RF Cable Assembly
from Maury Microwave
|
| The StabilityVNA™ (SV-Series) from Maury Microwave are 67 GHz Test Port VNA Cable Assemblies. They offer excellent amplitude and phase stability with flexure, thereby improving measurement accuracy while reducing measurement uncertainty. These cable assemblies have excellent flexibility and anti-skid bands to ensure the cables can be arbitrarily positioned without spring-back or stress on DUTs. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4kW Solid-State Pulse Amplifier from 400 to 1000 MHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2123P-4KW from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 400 to 1000 MHz. It provides a peak pulsed output power of 4 kW with a gain of more than 66 dB (gain adjustment range of 20 dB). The amplifier has a pulse width of up to 100 µs, 6% duty cycle, and a pulse droop of less than 1 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-PIM Nex10 Plug to N-Type Jack Straight Adapter from DC to 6 GHz | |
Between Series RF Adapter
from Amphenol RF
|
| The AD-N10JNJ-1 from Amphenol RF is a Nex10 Plug to N-Type Jack Straight Adapter with low PIM performance up to 6 GHz. This between-series coaxial adapter has a compact design that allows for more connection density in comparison to other connectors or adapters. It is designed to prevent passive intermodulation (PIM) and reduce interference in small cells, distributed antenna systems (DAS), and MIMO applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wi-Fi 6E & 7 Coexistence BAW Filter up to 6.5 GHz | |
Band Pass Filter
from Akoustis
|
| The A10765 from Akoustis is a Wi-Fi 6E & 7 Coexistence BAW Filter that operates up to 6.5 GHz covering U-NII Bands from 5 to 8 GHz. It has a passband of 1180 MHz and can handle an RF input power of up to +30 dBm. This filter utilizes Akoustis’ patented XBAW technology to provide exceptional RF filter performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 36-Port, 4x4 MIMO Base Station Panel Antenna from 1695 to 2690 MHz | |
Base Station Antenna
from Galtronics USA, Inc
|
| The GP5136-07800 from Galtronics is a 4x4 MIMO Base Station Panel Antenna that operates from 1695 to 2690 MHz. This dual-slant (±45°)-polarized antenna provides a gain of up to 23.2 dBi and has a VSWR of 1.4:1. It has an azimuth beamwidth of up to 8.8°, elevation beamwidth of 16.0°, and an electrical down-tilt of 6 FET (per each 4 x 4 beam cluster). |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.92 mm Edge-Lock RF PCB Connector | |
RF Connector
from SV Microwave
|
| The 1521-00005 from SV Microwave is a 40 GHz 2.92 mm Edge-Lock RF PCB Connector. It has an edge-lock design that allows for precision placement prior to the reflow process and ensures optimal RF performance throughout the connector’s full frequency range. This design is developed to form an interference fit between the conical alignment pin and the PCB thru-hole, thus pulling the contact lane of the connector into the edge of the PCB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Bit Silicon Digital Attenuator from 100 MHz to 30 GHz | |
RF Variable Attenuator
from Analog Devices
|
| The ADRF5716 from Analog Devices is a 2-bit Silicon Digital Attenuator that operates from 100 MHz to 30 GHz. It has an attenuation range of 48 dB with a step size of 16 dB and an attenuation accuracy of ±0.50 dB. This attenuator can handle an input power of up to 33 dBm and has an insertion loss of less than 2.9 dB. It has a rise/fall time switching of 20 ns and an on-time/off-time switching of 50 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| GaAs MMIC Mixer from 2.5 to 6 GHz | |
RF Mixer
from BeRex, Inc.
|
| The BM351 from Berex is a GaAs MMIC Mixer with an RF/LO frequency from 2.5 to 6 GHz and IF frequency from 50 to 200 MHz. It has a conversion loss of 9 dB and provides RF-IF isolation of up-to 37.9 dB with an IP3 of 32 dBm. The mixer has a passive GaAs FET converter and two stage integrated LO driver. |
| |
Download Datasheet
Product Details | |
|
|
|
| Flame-Retardant Glass Reinforced Hydrocarbon Laminates | |
Laminate
from Rogers Corporation
|
| The Anteo™ from Rogers Corporation are Laminates that are based on glass reinforced hydrocarbon thermoset platform. They are designed with a dielectric constant (Dk) to match that of FR-4 and offer a more cost-effective solution while retaining the tight Dk and thickness tolerances required to cater to wireless market. These laminates are designed to be fabricated using standard epoxy/glass (FR-4) processes which align with conventional bond plies. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface Mount Directional Coupler from 2 to 18 GHz | |
Directional Coupler
from Knowles
|
| The FPC09291 from Knowles is a Wide Band Wire Bondable (WB) Directional Coupler that operates from 2 to 18 GHz. This 10 dB coupler uses DLI’s high dielectric ceramic materials to provide a small size device with minimal performance variation over temperature. It has an insertion loss of less than 1.2 dB and directivity of over 10 dB. This coupler is available in a surface-mount package that measures 12.7 x 3.81 x 0.76 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Handheld Cable and Antenna Analyzer from 5 kHz to 6 GHz | |
RF Spectrum Analyzer
from Anritsu
|
| The Site MasterTM MS2089A from Anritsu is a Handheld Cable and Antenna Analyzer with a frequency range of 5 kHz to 6 GHz. It has cable and antenna spectrum analysis and monitoring capabilities that together offer a complete test solution for industry professionals. This cable analyzer has a dynamic range of more than 105 dB and a displayed average noise level (DANL) of -167 dBm with a sweep speed of 45 GHz/s. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Channel Receiver Front-End Module 1.8 to 2.8 GHz | |
Front End Module
from iCana
|
| The ARQSF1828-RX-A from iCana is a Dual-channel, Receiver Front-End Module that operates from 1.8 to 2.8 GHz. Each channel of this FEM consists of a silicon SPDT switch and a two-stage GaAs LNA with bypass. The LNA provides high and low gain modes with a noise figure of 1.3 dB and the SPDT switch can handle an input power of up to 12 W with 10 dB PAR. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Block Up Converter Power Amplifiers from 28.5 to 29.5 GHz | |
Block Up Converter
from EM Research
|
| The BUCPA Series from EM Research are Block Up Converter Power Amplifiers that convert input frequencies from 1 – 2 GHz to output frequencies (RF) from 28.5 – 29.5 GHz. They deliver an output power of 10 W (~40 dBm) with a gain of 62 dB. These converters have spurious levels of less than -60 dBc and phase noise of -77 dBc/Hz (at 1 kHz offset). |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged GNSS/INS Receiver with RTK for Centimeter-Level Positioning | |
GNSS Module
from Septentrio
|
| The AntaRx-Si3 from Septentrio is a GNSS/INS Receiver designed to provide robust and reliable positioning and 3D altitude in challenging environments. It integrates a GNSS receiver, an inertial sensor, and an antenna in a single ultra-robust module. This receiver can simultaneously receive signals from GPS, GLONASS, BeiDou, Galileo, QZSS, and SBAS constellations using 544 built-in hardware channels and provides centimeter-level positioning services for excellent performance in multiple heading, pitch, and roll angles. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Orthomode Transducers from 33 to 220 GHz for 5G/6G Test Applications | |
Orthomode Transducer
from Flann Microwave
|
| The Series 785 from Flann Microwave are Orthomode Transducers (OMTs) that operate from 33 to 220 GHz. They provide an isolation of 40 dB, have a cross-polarization of 35 dB, and an insertion loss of 1 dB. These OMTs are bi-directional that allow signals to be sent from, or received at, the rectangular ports via an antenna supporting dual polarization (at the common port). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
