Featured Products this Week . |
|
|
6 GHz Low-Smoke, Fire-Retardant Cable for In-Building Applications |
RF Cable
from Times Microwave Systems
|
The LMR-400-75-FR from Times Microwave Systems is an RF Cable that operates up to 6 GHz. This RF cable is a non-toxic (non-halogen), low-smoke, and fire-retardant solution that is designed for in-building runs to enable routing anywhere except air handling plenums. It is UL/NEC and CSA-rated, and also meets the requirements of MSHA-P standard for mining applications. |
|
Download Datasheet
Product Details | |
|
|
|
50 W GaN-on-SiC Power Amplifier Pallet from 500 to 2500 MHz |
RF Amplifier
from RFHIC
|
The RWP15040-10 from RFHIC is a GaN-on-SiC Power Amplifier Pallet that operates from 500 to 2500 MHz. It provides an output power of 47 dBm (~50W) and has a power gain of 38 dB with a flatness of less than +/-2 dB. This amplifier is fabricated using GaN-on-SiC technology and is mounted on an aluminum sub-carrier with full in/out matching for broadband operation. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Low Profile Wirewound Chip Inductors from 0.5 to 13 nH |
RF Inductor
from Coilcraft
|
The 0201HT Series from Coilcraft are Low Profile Wirewound Chip Inductors with inductance values from 0.5 to 13 nH. They have higher Q and lower DCR than similarly sized thin-film inductors and are optimized for high-frequency impedance matching in applications such as cell phones, wearable devices, Wi-Fi, Bluetooth, GPS, and LTE/5G IoT networks. |
|
Download Datasheet
Product Details | |
|
|
|
30 V Bias Tee from 160 kHz to 110 GHz |
Bias Tee
from HYPERLABS
|
The HL9449 from Hyperlabs is a Bias Tee that operates from 160 kHz to 110 GHz. It has a DC breakdown voltage of up to 30 V and a breakdown current of 175 mA. The bias tee has an insertion loss of less than 2.5 dB and has a rise time of 3.2 ps. It has an amplitude match of ±0.1 dB and a phase match of ±4°. |
|
Download Datasheet
Product Details | |
|
|
|
2-Port USB Controlled Lab Grade VNA from 300 kHz to 6.5 GHz |
Vector Network Analyzer
from Copper Mountain Technologies
|
The SC5065 from Copper Mountain Technologies is a modular 2-port compact lab grade VNA that operates from 300 kHz to 6.5 GHz. This small USB Controlled lab grade VNA has higher speeds, more dynamic range, and higher output power, with features like time domain and gating conversion, segmented frequency sweeps, linear/ logarithmic sweeps, power sweeps, multiple trace formats, 16 channels max. with up to 16 traces each, marker math, and limit tests. |
|
Download Datasheet
Product Details | |
|
|
|
|
50 dB Variable Step Attenuator from DC to 2 GHz |
RF Variable Attenuator
from MECA
|
The 685-110-1 from MECA is a Variable Step Attenuator that operates from DC to 2 GHz. It has an attenuation range of 0 to 50 dB in 1 dB steps (manually controlled by a knob) and an insertion loss of less than 1 dB. This attenuator can handle an average power of 2 W, and a peak input power of 1 kW with a VSWR of less than 1.5:1. |
|
Download Datasheet
Product Details | |
|
|
|
150 W, 180° RF Hybrid Combiner/Divider from 2 to 6 GHz |
180 Degree Hybrid Coupler
from Werlatone Inc
|
The H12489 from Werlatone is a 180° RF Hybrid Combiner/Divider that operates from 2000 to 6000 MHz. It can handle a CW input power of 150 W, provides more than 20 dB of isolation, and has an insertion loss of less than 0.65 dB. This combiner/divider has a phase balance of 180° (±8°) and a maximum amplitude balance of ±0.4 dB. |
|
Download Datasheet
Product Details | |
|
|
|
75-Ohm 1:1 Surface-Mount Transformer from 45 to 2000 MHz |
Balun
from MiniRF
|
The MRFXF0089 from MiniRF is an RF Transformer that operates from 45 to 2000 MHz. It has an impedance ratio of 1:1 and an insertion loss of 0.5 dB. This 75-ohm transformer has an amplitude balance of 1.2 dB and a phase balance of less than 10°. It is designed for applications that require small, low cost, and highly reliable surface-mount components and has a welded wire construction for increased reliability. |
|
Download Datasheet
Product Details | |
|
|
|
0-20 dB Fixed Chip Attenuators from DC to 50 GHz |
Fixed Attenuator
from Smiths Interconnect
|
The TSX Series from Smiths Interconnect are Fixed Chip Attenuators that operate from DC to 50 GHz. These attenuators are available in attenuation values of 0-10 (with a 1 dB step size), 15, & 20 dB. They can handle a CW input power of up to 10 W and have a VSWR of less than 1.25:1. The attenuators have been developed using 3D Electromagnetic Simulation (EM) software to provide excellent performance in a total thin film process. |
|
Download Datasheet
Product Details | |
|
|
|
4-Channel USB-Controlled Attenuator from 50 to 6000 MHz |
RF Variable Attenuator
from Adaura Technologies
|
The AD-USB PT5 from Adaura Technologies is a 4 Channel Attenuator that operates from 50 to 6000 MHz. It has an attenuation range from 0 to 63 dB in 0.5 dB steps and have a switching time of 250 µs. The attenuator can handle an input power of up to 1 W, provides chain-to-chain isolation of more than 85 dB, and has an insertion loss of less than 9 dB. |
|
Download Datasheet
Product Details | |
|
|
|
Compact and Cost-Effective Signal Generator from 9 kHz to 3.2 GHz |
Signal Generator
from Rohde & Schwarz
|
The R&S®SMC100A from Rohde & Schwarz is a Signal Generator with a frequency range from 9 kHz to 1.1 GHz/3.2 GHz. It supports AM/FM/PM/pulse modulation functions and has an internal modulation and pulse generator to supply the required modulation signals. This signal generator has an SSB phase noise of -105 dBc (at 20 kHz offset, 1 GHz frequency) and non-harmonics of better than -60 dBc. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2-Way MLDD Power Divider from 0.4 to 7.125 GHz |
Power Divider
from KRYTAR
|
The 600407125 from KRYTAR is a 2-Way Power Divider that operates from 0.4 to 7.125 GHz. This MLDD (matched-line directional divider) can handle an input power of 10 W, provides more than 15 dB of isolation, and has an insertion loss of less than 1 dB. It uses a MLDD proprietary design to provide ultra-high performance over a broad frequency range. |
|
Download Datasheet
Product Details | |
|
|
|
6-Bit Digital Step Attenuator from 9 kHz to 13 GHz |
RF Variable Attenuator
from pSemi, A Murata Company
|
The PE43610 from pSemi is a 6-Bit Digital Step Attenuator that operates from 9 kHz to 13 GHz. It has an attenuation range from 0-31.5 dB with a step size of 0.5 dB. This DSA features glitch-free attenuation state transitions and has a control voltage of 1.8 V with an optional VSS_EXT bypass mode to improve spurious performance, making this device ideal for test and measurement, point-to-point communication systems, and very small aperture terminals (VSAT). |
|
Download Datasheet
Product Details | |
|
|
|
87 W Doherty Power Amplifier from 3400 to 3600 MHz |
RF Amplifier
from NXP Semiconductors
|
The A5M35TG040-TC from NXP Semiconductors is a Doherty Power Amplifier that operates from 3400 to 3600 MHz. It is a 2-stage module that includes an LDMOS integrated circuit as a driver and a GaN final stage amplifier. The amplifier delivers a Pulsed CW power of 49.4 dBm (~87 W) with a gain of 30.5 dB and a power-added efficiency of 47.5%. |
|
Download Datasheet
Product Details | |
|
|
|
6-Port Base Station Panel Antenna from 617 to 2690 MHz |
Base Station Antenna
from Amphenol Antenna Solutions
|
The APXV4ALL24-U-J20 from Amphenol Antenna Solutions is a 6-Port Base Station Panel Antenna that operates from 617-894 MHz (low-band) and 1695-2690 MHz (mid-band). This ±45° cross-polarized antenna provides a gain of 18.5 dBi and has a VSWR of 1.5:1. It has an azimuth beamwidth of 48°, an elevation beamwidth of 10.4°, and supports an electrical downtilt from 2°to 12°. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
Electronically Scanned Array Antenna SATCOM Terminal from 17.7 to 31 GHz |
Electronically Steerable Antenna
from ReQuTech AB
|
The RESA L Ka from ReQuTech is an Electronically Scanned Phased Array Antenna Terminal that operates from 17.7 to 21.2 GHz (Rx) and 27.5 to 31 GHz (Tx). It features a fully integrated satellite terminal suitable for SATCOM-On-The-Move LEO/MEO/GEO communication. This lightweight terminal can be used either as a standalone product or in a mesh configuration with several RESA terminals. |
|
Download Datasheet
Product Details | |
|