PREV 17 July, 2024 NEXT

New RF and Microwave Products this Week

17 July, 2024 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 17 July, 2024
 
Sponsored by SV Microwave
 
 
New RF and Microwave Products this Week .
RF Amplifier
Low Noise Amplifier from 30 kHz to 20 GHz
RF Amplifier  from Analog Devices

The ADL8120 from Analog Devices is a Low Noise Amplifier (LNA) that operates from 30 kHz to 20 GHz. It delivers 15 dB of gain with a noise figure of less than 2.3 dB and has a saturated output power of up to 17.5 dBm. This LNA has a power-added efficiency (PAE) of  20.5%and provides a return loss of 8-15 dB. It is fabricated on a pseudomorphic high electron mobility transistor (pHEMT) process and has a resistor programmable bias setting.
Download Datasheet Product Details
RF Amplifier
Ka-Band Dual-Channel Low Noise Amplifier from 17.7 to 21.2 GHz
RF Amplifier  from Renesas

The F6932 from Renesas is a Dual-Channel Low Noise Amplifier that operates in the Ka-Band from 17.7 to 21.2 GHz. It provides 22 dB of gain with a noise figure of less than 2 dB and has an output P1dB of -2 dBm. This amplifier is fabricated using a silicon on insulator (SOI) process and is designed for application in Ka-Band SATCOM planar phased array antennas.
Download Datasheet Product Details
RF Amplifier
Low Noise Amplifier MMIC from 1.9 to 4.4 GHz for 5G Applications
RF Amplifier  from AmpliTech

The AGLNA0204 from AmpliTech is a Low Noise Amplifier (LNA) MMIC that operates from 1.9 to 4.4 GHz. It delivers a saturated output power of 12 dBm with a gain of 26.5 dB and has a noise figure of 0.8 dB. This LNA requires a DC supply of +5 V and consumes 25 mA of current. It is available as a 50-ohm internally matched die that measures 1.8 x 2.0 x 0.1 mm.
Download Datasheet Product Details
RF Transistor
2.5 kW LDMOS Power Transistor from 1 to 400 MHz
RF Transistor  from Ampleon

The ART2K5TFUG from Amphenol is an LDMOS Power Transistor that operates from 1 to 400 MHz. It delivers an output power of 2500 W with a gain of 29.5 dB and has a drain efficiency of 76%. This transistor has an integrated thermal sensor and dual-sided ESD protection that enables class-C operation and complete switch-off of the transistor.
Download Datasheet Product Details
RF Amplifier
GaAs MMIC Power Amplifier from 26.5 to 29.5 GHz for mmWave 5G Applications
RF Amplifier  from CML Microcircuits

The CMX90A702 from CML Microcircuits is an MMIC Power Amplifier that operates from 26.5 to 29.5 GHz. It provides a small signal gain of 22.5 dB with a P1dB of up to 26.7 dBm, and a Power Added Efficiency (PAE) of 28%. This three-stage amplifier is easy to monitor and control with an on-chip temperature-compensated RF power detector and fast-switching enable circuit.
Download Datasheet Product Details
RF Amplifier
20 W GaN-on-SiC Power Amplifier from 2000 to 3000 MHz
RF Amplifier  from RFHIC

The RWP25020-50 from RFHIC is a GaN-on-SiC Power Amplifier that operates from 2000 to 3000 MHz. It provides an output power of 43 dBm (~20 W) and has a power gain of 22 dB. This amplifier is designed using RFHIC’s GaN-on-SiC high-electron-mobility transistors (HEMT), providing high breakdown voltage, efficiency, and lower thermal dissipation.
Download Datasheet Product Details
Sponsored by SV Microwave
SV Microwave
Metric RF Cable Assemblies
SV Microwave's Metric RF Cable Assemblies feature fixed-length Ø.085" RF cables in standard 250mm and 500mm lengths for SMA, 2.92mm, SMP, and SMPM series. With low solder wicking, high flexibility, and a high flex-life, these cables support frequencies up to 40 GHz. Ideal for 5G, Mil/Aero, and RF Test applications. Click here to learn more.
RF Amplifier
300 W GaN Solid State Power Amplifier from 0.7 to 6.0 GHz
RF Amplifier  from Advanced Amplifiers

The AA-700M6G-300 from Advanced Amplifiers is a GaN Solid State Power Amplifier that operates from 0.7 to 6.0 GHz. It delivers a saturated output power of 300 W and a power gain of over 53 dB with a power gain flatness of 4 dB p-p. This class AB linear amplifier has an input/output return loss of over 10 dB and a 2-tone intermodulation (IMD) of -30 dBc.
Download Datasheet Product Details
RF Amplifier
Rugged 1.5 kW GaN Pulsed Power Amplifier from 2.9 to 3.3 GHz
RF Amplifier  from dB Control

The dB-8048 from dB Control is a Pulsed Solid-State Power Amplifier that operates from 2.9 to 3.3 GHz. It delivers a peak output power of 1.5 kW with pulse widths from 0.5 µs to 100 µs and a maximum duty cycle of 10%. This class-B amplifier is based on GaN technology and has an efficiency of better than 20%. It provides a 2nd harmonic rejection of better than -30 dBc, has a propagation delay of less than 100 ns and a maximum droop of 0.8 dB.
Download Datasheet Product Details
RF Inductor
33/66 nH Air Core Inductors for RF Power Amplifiers
RF Inductor  from Coilcraft

The ZA9423 Series from Coilcraft are Air Core Inductors with inductance values of 33 or 66 nH. They have a Q factor of 456 (33 nH) or 404 (66 nH) and an inductance tolerance of ±20%. These inductors have DC resistance values of 0.53 mO (33 nH) or 0.75 mO (66 nH) and a current rating of less than 42.0 A (RMS). They are available in a surface-mount package that measures 32 x 0.5 mm.
Download Datasheet Product Details
Software Defined Radio
4-Channel SOSA/MORA-Aligned Software-Defined Radio from 2 MHz to 8 GHz
Software Defined Radio  from Epiq Solutions

The NDR374 from Epiq Solutions is a 4-Channel Software-Defined Radio (SDR) that operates from 2 MHz to 8 GHz. It is fully compliant with the latest SOSA and MORA 2.4 standards, ensuring high compatibility with a wide range of systems. This SDR has been seamlessly integrated into various types of chassis, allowing for rapid deployment and efficient support in time-sensitive situations.
Download Datasheet Product Details
Signal Generator Extender
Signal Frequency Extender from 110 to 170 GHz for FMCW Radar Applications
Signal Generator Extender  from ACST GmbH

The 1214B-8A from ACST GmbH is a Frequency Extender that upconverts input frequencies from 13.75 - 21.25 GHz to 110 - 170 GHz. This extender has a modular design with a metallic housing that has standard input and output interfaces. It delivers an output power of 10 mW and has a mechanically-driven variable attenuator to control the output power.
Download Datasheet Product Details
Low Pass RF Filter
Rugged Lowpass Filter with Passband from DC to 38 GHz for Military Applications
Low Pass RF Filter  from Benchmark Lark Technology

The Suspended Substrate XSL40000-7AA Series from Benchmark Lark Technology are Lowpass Filters with a passband from DC to 38000 MHz. They have a passband insertion loss of less than 2.1 dB and provide an out-of-band rejection of 50 dB (at 55000 MHz). These filters offer a ruggedized lightweight design and have excellent temperature stability in a small size.
Download Datasheet Product Details
Sponsored by SV Microwave
 
 
Gain Equalizer
Gain Equalizer from 0.01 to 20 GHz for Aerospace Applications
Gain Equalizer  from ERZIA

The ERZ-EQU-0000-2000-10 from ERZIA is a Gain Equalizer that operates from 0.01 to 20 GHz. It has a positive gain slope over the frequency range and reduces losses for amplifiers and other RF systems. The equalizer has an insertion loss from 2 to 10 dB across the band with a VSWR of 1.5:1. The ERZ-EQU-0000-2000-10 is available in a compact aluminum housing that measures 24 x 18 x 10 mm and has 2.92 mm (female) connectors.
Download Datasheet Product Details
Board Level EMI/RFI Shielding Can
One/Two-Piece Drawn-Seamless EMI/RFI Board Shields
Board Level EMI/RFI Shielding Can  from Masach Tech

The MS213-10 Series from Masach are Drawn-Seamless EMI/RFI Shields for high-frequency RF applications. They are available in 1 or 2-piece configurations made with tin-plated steel or nickel-silver material. The Nickel-Silver series have high corrosion resistance and are used in sensitive-harsh environments in a variety of industries such as medical devices, aerospace, automotive, etc.
Download Datasheet Product Details
GPS/GNSS Disciplined Oscillator
10 MHz Sine-wave GPS/GNSS-Disciplined Rubidium Oscillator
GPS/GNSS Disciplined Oscillator  from Safran Electronics & Defense

The SRO-100 from Safran is a GPS/GNSS-Disciplined Rubidium Oscillator with an output frequency of 10 MHz (5 MHz, 15 MHz options available). It provides a sine-wave output with a phase noise of -145 dBc/Hz @1 kHz offset and has a frequency accuracy of 5 x 10-11. This oscillator utilizes SmarTiming+® technology and has spurious levels of better than -80 dBc and harmonics of -25 dBc.
Download Datasheet Product Details
RF Switch
Solid-State Absorptive SP8T Switch from 5 to 3000 MHz
RF Switch  from JFW Industries

The 75S-400 from JFW Industries is a Solid-State Absorptive SP8T Switch that operates from 5 to 3000 MHz. It can handle an input power of 20 dBm, provides an isolation of 80 dB, and has an insertion loss of less than 3.9 dB. This SP8T switch will self-terminate at an impedance of 75 Ohms. It consists of eight control lines and each line is activated using TTL signal levels.
Download Datasheet Product Details
Power Divider
2-Way Resistive Power Splitter from DC to 100 GHz
Power Divider  from HYPERLABS

The HL9489 from Hyperlabs is a 2-way Resistive Power Splitter that operates from DC to 100 GHz. It can handle an input power of up to +24 dBm and has an insertion loss of less than 9 dB. This power splitter has an amplitude balance of ±0.3 dB and a phase balance of ±6°. It is designed using a two-resistor network, resulting in exceptional band flatness and return loss across the frequency range.
Download Datasheet Product Details
RF Shielded Test Enclosure
RF Shield Box for Digital Forensics Investigations
RF Shielded Test Enclosure  from RF Electronics

The HDRF-1557 from RF Electronics is a Benchtop RF Shield Box that offers high levels isolation up-to 12 GHz. It has thick RF absorbing foam that deaden standing waves and reflections, and is equipped with shielded power filters for power connection in the box while still blocking all wireless signals. This shield box has a rugged construction for longevity and is designed for digital forensic investigations with inbuilt gloves which allow manual handling of DUT.
Download Datasheet Product Details
RF Amplifier
25 dB Driver Amplifier from 5 to 22 GHz
RF Amplifier  from ATEK MIDAS

The ATEK564AN3 from ATEK MIDAS is a wideband driver amplifier that operates from 5 to 22 GHz (can be stretched to 4-24 GHz as well). It provides a flat gain of 20.7 to 25.8 dB across the band and has a P1dB of 21.5 dBm. It requires a single positive supply voltage of 3 to 5 V. The amplifier is available in a compact 3×3 mm low cost SMD package with input and output matched to 50 ohms internally.
Download Datasheet Product Details
Front End Module
Automotive-Grade Rx Front-End Module from 925 to 2650 MHz
Front End Module  from Skyworks Solutions

The SKY5A5012 from Skyworks Solutions is a Rx Front-End Module (FEM) that operates from 925 to 2690 MHz. It consists of multi-band, variable gain low noise amplifiers (LNAs) to enable compatibility with next-generation LNA-less LTE transceivers. The module supports all key 2 and 3 carrier aggregation band combinations.
Download Datasheet Product Details
RF Connector
SMPM Male 1x8 Block PCB Connectors
RF Connector  from Samtec

The GPPB from Samtec are SMPM Male 1x8 Block PCB Connectors that operate up to 55 GHz. These connectors have a dielectric withstanding voltage of 325 V and a VSWR of less than 1.40:1 with an insulation resistance of 5000 Mohms. They have a Brass body with PCCK beads and beryllium copper pins. These connectors are available in a single row footprint and have a push-on interface with varying retention forces.
Download Datasheet Product Details
RF Amplifier
600 W EMC Solid State Power Amplifier from 2 to 6 GHz
RF Amplifier  from RF-Lambda

The REMC02G06GE from RF-Lambda is an EMC Solid State Power Amplifier that operates from 2 to 6 GHz. It delivers a saturated output power of 58 dBm (~630 W) with a small signal gain of 70 dB. This GaN amplifier has a noise figure of 5 dB, a gain variance of +/-3 dB and an input return loss of -18 dB. It has an integrated digital control attenuator with an attenuation range of up to 20 dB in 0.5 dB steps.
Download Datasheet Product Details
Wireless Chipset
AEC-Q100 Grade 2 Bluetooth LE 5.3 SoC for Automotive Applications
Wireless Chipset  from Goodix Technology

The GR5405 from Goodix is a Bluetooth LE 5.3 SoC that is compliant with the AEC-Q100 Grade 2 standard for various automotive applications. It supports Bluetooth LE data rates of 1 Mbps, 2 Mbps, and Long Range (500 kbps, 125 kbps). This SoC delivers a Tx power of up to 15 dBm and has an Rx sensitivity of -99 dBm with a link budget of up to 114 dB.
Download Datasheet Product Details
Frequency Counter
Dual-Channel Frequency Analyzer from 400 MHz to 24 GHz
Frequency Counter  from Pendulum Instruments

The CNT-102 from Pendulum Instruments is a Dual-Channel Frequency Analyzer that operates up to 400 MHz (optional RF channel up to 24 GHz available). It is a new affordable model for multi-channel frequency and time-interval analysis in a bench-top unit. This analyzer enables users to track parallel frequency, phase or time simultaneously on two input channels on a large graphic screen and outperforms any competing timer/counter/analyzer on the market.
Download Datasheet Product Details
RFID Antenna
Backroom and Warehouse RFID Antenna from 865 to 956 MHz
RFID Antenna  from Zebra

The SR5502 from Zebra is a backroom and warehouse RFID antenna that operates from 865 to 956 MHz. This left-hand circularly-polarized (LHCP) antenna provides a gain of 6.7 dBiL (US) and 2 dBiL (EU). It has a 3 dB beamwidth of 83° x 84° and can handle an input power of up to 18 W. The antenna is designed to handle high tag volumes with increased accuracy and read rates.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]