| Featured Products this Week . |
|
|
| On-Wafer Probing Cable Assemblies from DC to 67 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The StabilityWafer Series from Maury Microwave are On-Wafer Probing Cable Assemblies that operate up to 67 GHz. They have an insertion loss of less than 1.79 dB/ft, a velocity of propagation of 74% and a shielding effectiveness of over 90 dB. These assemblies have a time delay of 1.34 ns/ft with a phase stability of up to ±14° and an amplitude stability of ±0.05 to ±0.20 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 18 GHz SiO2 Based Semi-Rigid Cable Assembly for Space Applications | |
RF Cable
from Times Microwave Systems
|
| The SiO2-270 from Times Microwave Systems is a SiO2 based Semi-Rigid Cable assembly that operates up to 18 GHz. It is designed to operate at extreme temperatures and applications that demand high phase tracking performance making it ideal for use in space. This 50-ohm cable uses proprietary Silicon Dioxide (SiO2) dielectric, which does not cause an abrupt shift in phase due to dielectric formulation as compared to solid or tape-wrapped PTFE-based products. |
| |
Download Datasheet
Product Details | |
|
|
|
| 33 GHz, 6/12-Inch Flexible Cable Assemblies | |
RF Cable Assembly
from SV Microwave
|
| The SuperFlex Ø.047 Series from SV Microwave are Cable Assemblies that operate up to 33 GHz. They are available with SMA, 2.92 mm, 2.4 mm, 1.85 mm, and SMPx coaxial interfaces in 6” and 12” lengths with options for custom and standard configurations. These highly flexible assemblies have an inside bend radius of 0.625 inches and can withstand extreme bends to fit in the smallest of spaces to ensure excellent performance after repeated usage. |
| |
Download Datasheet
Product Details | |
|
|
|
| 300 W, 12 dBi Horn Antenna from 0.7 to 18 GHz | |
Horn Antenna
from AH Systems Inc
|
| The SAS-571 from AH Systems is a double rigid Horn Antenna that operates from 0.7 to 18 GHz with a nominal 15 dBi of gain. This horn antenna can handle up to 300 W of power, has a VSWR of 1.6:1 (3.5:1 max) and is available with an N Type - Female connector. It is ideal for EMI measurements and compliance testing applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| mmWave YIG Band-Reject Filter with Stopband from 20 to 36 GHz | |
Band Stop Filter
from Micro Lambda Wireless, Inc.
|
| The MLFR-2036 from Micro Lambda Wireless is an mm-Wave YIG Band Reject/Notch Filter with a stopband from 20 to 36 GHz. It has a passband insertion loss of less than 3 dB and provides a rejection of more than 40 dB (for 15 MHz bandwidth) in the stopband. This filter can handle an input power of +28 dBm and has a tuning sensitivity of 25 MHz/mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 kW Pulsed Solid-State Power Amplifier from 2 to 8 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2085DBP-LC-2KW from Exodus Advanced Communications is a Solid-State Pulse Power Amplifier that operates from 2 to 8 GHz. It delivers a pulsed output power of 2 kW with a power gain of more than 63 dB. This Class AB amplifier utilizes an advanced high-power linear design and includes built-in protection circuits with extensive monitoring of critical parameters such as voltage, current, noise voltage, reflected power, and VSWR. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Passive Gain Equalizer MMIC from DC to 70 GHz | |
Gain Equalizer
from Marki Microwave
|
| The MEQ4-70ACH from Marki Microwave is a Passive GaAs Gain Equalizer MMIC that operates from DC to 70 GHz. It has a positive gain slope with attenuation options of 4, 6.8, and 10 dB. This passive equalizer has an insertion loss of less than 1.8 dB and provides a return loss of 25 dB. It has been designed to compensate for low-pass filtering effects in RF/microwave and high-speed digital systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz WLAN Front-End IC for Wi-Fi 6 Applications | |
Front End Module
from NXP Semiconductors
|
| The WLAN7207H from NXP is a 2.4 GHz WLAN Front-End IC that is designed for Wi-Fi 6 applications. It includes a Tx power amplifier with a directional coupler, a low noise receive amplifier, and a transmit/receive switch with a Bluetooth channel. The power amplifier supports 3 different TX gain modes to improve power efficiency. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 W GaN Power Amplifier MMIC from 24.25 to 26.5 GHz | |
RF Amplifier
from Qorvo
|
| The QPA0524 from Qorvo is a Ku-Band GaN Power Amplifier MMIC that operates from 24.25 to 26.5 GHz. It delivers an output power of 37 dBm (~5 W) with a small signal gain of 23 dB and a power-added efficiency of 23%. This amplifier provides linear power of 26 dBm (~400 mW) with an ACPR of -30 dBc at 802.11ac 160 MHz MCS. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from 30 kHz to 20 GHz | |
RF Amplifier
from Analog Devices
|
| The ADL8120 from Analog Devices is a Low Noise Amplifier (LNA) that operates from 30 kHz to 20 GHz. It delivers 15 dB of gain with a noise figure of less than 2.3 dB and has a saturated output power of up to 17.5 dBm. This LNA has a power-added efficiency (PAE) of 20.5% and provides a return loss of 8-15 dB. It is fabricated on a pseudomorphic high electron mobility transistor (pHEMT) process and has a resistor programmable bias setting. |
| |
Download Datasheet
Product Details | |
|
|
|
| 360 Degrees Analog Phase Shifter from 9.8 to 10.2 MHz | |
Analog Phase Shifter
from Pulsar Microwave
|
| The ST-18-444A from Pulsar Microwave is a 0 to 360 degree Analog Phase Shifter that operates from 9.8 to 10.2 MHz. The phase shifter has an insertion loss of 3 dB, a VSWR of 1.7:1 and can handle an input power of up to 5 dBm. It has a control voltage from 0-10V and is available in a module with SMA connectors that measures 1.8 x 1.8 x 0.75 Inches. |
| |
Download Datasheet
Product Details | |
|
|
|
| 90° Hybrid Coupler from 400 MHz to 7.125 GHz | |
90 Degree Hybrid Coupler
from KRYTAR
|
| The 300407125 from KRYTAR is a 90° Hybrid Coupler that operates from 400 MHz to 7.125 GHz. It provides a coupling of 3 dB, an isolation of more than 19 dB, and has an insertion loss of less than 1.8 dB. This coupler can handle an average input power of 20 W and a peak input power of 3 kW. It has an amplitude imbalance of ±1 dB and a phase imbalance of ±5°. |
| |
Download Datasheet
Product Details | |
|
|
|
| Waveguide Power Sensor from 60 to 90 GHz | |
RF Power Meter & Sensor
from Keysight Technologies
|
| The E8486A from Keysight is a Power Sensor that operates from 60 to 90 GHz. The power sensor provides an excellent SWR of 1.06, high reliability, low loss (30 dB return loss), and a 50 MHz calibration port to reduce measurement uncertainties. It has a dynamic range spanning from -60 to +20 dBm. This device can handle a maximum average power of up to 200mW and peak power of up to 40 W. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Multi-Band Ceramic GNSS Patch Antenna for Wearable Applications | |
GPS/GNSS Antenna
from Taoglas
|
| The HP5354.A from Taoglas is a Multi-band GNSS Patch Antenna. This RHCP-polarized antenna provides a peak gain of 2.61 dBi with an efficiency of 51.7%. It utilizes an innovative ceramic patch within a patch antenna design with an optimized gain for GPS L1/L5, Galileo, GLONASS, and BeiDou bands. This directional antenna has an innovative design that allows customers to integrate a multi-band L1/L5 GNSS patch into devices where this would not have been possible due to height constraints. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE/NB-IoT PCB Mount Antenna from 698-960/1710-2690 MHz | |
Antenna
from TE Connectivity
|
| The 2108994-1 from TE Connectivity is a PCB Mount Antenna that operates from 698 to 960 MHz and 1710 to 2690 MHz. This linearly polarized omnidirectional antenna provides a gain of 2 dBi and has a VSWR of less than 3.0:1. It has an omni-directional radiation pattern and has been designed to support LTE and NB-IoT bands. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5 GHz Wi-Fi 6 + Bluetooth 5.3 (LE) Module | |
RF Module
from Panasonic Industry Europe
|
| The PAN9019 from Panasonic is a 2.4/5 GHz Wi-Fi 6 Companion Module with integrated Bluetooth 5.3 BDR/EDR/Low Energy (LE) support. It has a channel bandwidth of 20, 40 and 80 MHz and supports 802.11e Quality of Service for multimedia applications. The independent operation of the two standards enables 802.11ax data rates with High Efficiency (HE) and low-power operation (Bluetooth LE). |
| |
Download Datasheet
Product Details | |
|
|
|
| 3GPP Rel-17 Compliant Global 5G Module | |
Cellular Module
from Fibocom
|
| The FM190W-GL from Fibocom is a 5G Sub-6GHz and mmWave Module that is compliant with the 3GPP Release 17 standard. It delivers a downlink data rate of up to 10 Gbps and an uplink data rate of 3.38 Gbps. The FM190W-GL is based on the Qualcomm Snapdragon SDX75 chipset and has 8GB LPDDR4x RAM & 8GB Nand Flash supporting both 5G standalone (SA) and non-standalone (NSA) network architectures. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6.2 GHz Wi-Fi 6E and Wi-Fi 7 Coexistence BAW Filter | |
Band Pass Filter
from Akoustis
|
| The A10162 from Akoustis is a Wi-Fi 6E and Wi-Fi 7 Coexistence BAW Filter. It has a center frequency of 6.2 GHz and a bandwidth of 480 MHz covering U-NII-5. This filter utilizes Akoustis’ patented, XBAW technology and has single-ended Tx/Rx ports which can handle exceptionally high power necessary for demanding power requirements of the latest Wi-Fi 6E and 7 standards. |
| |
Download Datasheet
Product Details | |
|
|
|
| E-Band mmWave Radio Link from 71 - 76 GHz and 81 - 86 GHz | |
Microwave Backhaul Radio Links
from Vubiq
|
| The HaulPass E10G from Vubiq Networks is a Millimeter Wave Radio Link that operates in the E-Band from 71 to 76 GHz and 81 to 86 GHz. It has a programmable channel bandwidth from 100 MHz to 2 GHz (baud rate, coding, and modulation programmable) with a step size of 31.25 MHz. This radio link incorporates Vubiq Networks’ patented modular integrated waveguide technology and adaptive code modulation and baud (ACMB) technology that instantly sets code rate, modulation and baud in real time, resulting in a hitless adjustment to link conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wideband Data Link Digital Transceiver from 1350 to 4990 MHz | |
Data Link
from L3Harris Technologies
|
| The BANDIT 2x from L3Harris Technologies is a Data Link Digital Transceiver that operates in the L, S, and C-Bands from 1350-1850 MHz, 2025-2500 MHz, and 4400-4990 MHz. It is a low-cost, lightweight and all-in-one solution that provides wideband capability to a wide variety of applications. This tri-band transceiver delivers real-time IP-based, full motion digital video for situational awareness, targeting, battle damage assessment, surveillance, video broadcast, remote sensors, convoy operations, and other situations where high resolution video is required. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 to 40 MHz Stratum 3 TCXO | |
TCXO
from MtronPTI
|
| The M6071 series from MtronPTI is a Stratum 3 TCXO with an oscillation frequency from 10 to 40 MHz. This Stratum 3 TCXO has a phase noise of -97 dBc/Hz (@ 10 Hz offset @ 38.8 MHz) and has a stability as low as ±0.1ppm while operating from -40 to 105 degrees celsius. The RoHS compliant oscillator requires a supply voltage of 3.3 V and provides a CMOS or Clipped Sinewave output. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Block Downconverters from 38 to 40 GHz | |
Low Noise Block
from ACORDE
|
| The ACLNBD-Q Dual-Band Series from ACORDE are Low Noise Block (LNB) Downconverters that convert input frequencies from 38-40 GHz to output frequencies from 950-1950 MHz. They provide a gain of more than 60 dB with a noise figure of less than 2.8 dB and have a phase noise of -80 dBc/Hz (at 10 kHz offset). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
