PREV 25 July, 2024 NEXT

Latest Test & Measurement News & Products

25 July, 2024 Newsletter - everything RF

Top stories this week. View it in your browser

 
Test & Measurement Update
Date: 25 July, 2024
 
Sponsored by HAROGIC Technologies
 
 
Latest Test & Measurement News
News
Rohde & Schwarz ZND Family of 2-Port Unidirectional VNAs Provide Solid Performance up to 8.5 GHz

Rohde & Schwarz

News
EMITE and Rohde & Schwarz Partner to Support OTA Testing of Wi-Fi 7 and 5G RedCap Devices

Rohde & Schwarz

News
Samsung Semiconductor India Research Selects Keysight Signaling Field-To-Lab Solution

Keysight Technologies

News
Signal Hound Introduces New SP8T Antenna Switch Based on Silicon-on-Insulator Technology

Signal Hound

News
AnaPico Becomes Part of Keysight Technologies

AnaPico

News
Mini-Circuits Offers Precision VNA Cables from 40 to 67 GHz

Mini Circuits

News
VIAVI Selects ETS-Lindgren's RF-shielded Anechoic Chamber For Over-The-Air Testing Of Open Radio Units

Viavi Solutions

News
TÜV Rheinland to Launch a Cutting-Edge Product Testing and Certification Facility in the Northeast United States

TÜV Rheinland

News
MVG Introduces Dual Linearly-Polarized Probes with Minimul Scattering for Planar Near-Field Testing

Microwave Vision Group

News
Korea Radio Promotion Association Opens a 5G-Advanced & 6G Test Lab with Anritsu

Anritsu

Sponsored by HAROGIC Technologies
PXN-400
Handheld Spectrum Analyzer from 9 kHz to 40 GHz
The XN-400 is the latest 40 GHz handheld spectrum analyzer from HAROGIC Technologies. Building on continuous innovation and SWaP-C design principles, this analyzer offers an unmatched combination of size, performance and cost. This handheld spectrum analyzer has a 10.1-inch full-touch screen and weighs only 1.5 kg. Click here to learn more.
Trending T&M White Papers & Articles
Mixer measurements with a Vector Network Analyzer - SIGLENT
Over-The-Air RF Conformance Measurements on 5G NR Devices - Rohde & Schwarz
A GNSS Over the Air Test Methodology - Spirent Communications
RedCap Testing: Filling the Gap in 5G New Radio - Viavi Solutions
Over-the-Air (OTA) mmWave Antenna Testing - Copper Mountain Technologies
More Whitepapers
Trending Test & Measurement Products .
Vector Network Analyzer
Vector Network Analyzer from 100 kHz to 4.5/8.5 GHz
Vector Network Analyzer  from Rohde & Schwarz

The R&S®ZND from Rohde & Schwarz is a Vector Network Analyzer (VNA) designed for unidirectional measurements from 100 kHz to 4.5 GHz and bidirectional measurements up to 8.5 GHz (optional). This VNA can measure all four S-parameters (S11, S12, S21, S22) and other network parameters such as magnitude and phase of the S-parameters.
Download Datasheet Product Details
RF Switch
8-Port USB Controlled Antenna Switch from 100 kHz to 8 GHz
RF Switch  from Signal Hound

The RFS8 from Signal Hound is an 8-port antenna switch (SP8T) that operates from 100 kHz to 8 GHz. This absorptive USB-controlled solid-state switch has an ultra-fast switching speed and a rise/fall time of 100 ns. It is based on silicon-on-insulator (SOI) technology and can switch from LF all the way through 8 GHz and can also be used for pseudo-doppler direction-finding applications.
Download Datasheet Product Details
Signal Generator
Non-PLL Based Signal Generator from 10 MHz to 3 GHz
Signal Generator  from Boonton

The SGX1003 from Boonton is an RF Signal Generator that operates from 10 MHz to 3.072 GHz. It has an output power range from -50 to +18 dBm and a switching speed of 200 µs. The generator has a phase noise of -116 dBc/Hz at 6 GHz (10 kHz offset) and a jitter of less than 100 fs. It utilizes a unique non-PLL (phase-locked loop) design with a digital front-end and direct, proprietary back end.
Download Datasheet Product Details
RF Variable Attenuator
4-Channel USB Solid-State Programmable Attenuator from 200 MHz to 6 GHz
RF Variable Attenuator  from JFW Industries

The 50P-2089 from JFW Industries is a 4-Channel USB-Based Solid-State Programmable Attenuator that operates from 200 to 6000 MHz. It has an attenuation range from 0 to 95 dB with 1 dB steps. This variable attenuator has an insertion loss of less than 8.3 dB and a VSWR of up to 2.0:1. All four channels can be independently controlled via a USB type-C interface and is also compatible with Python, C#, PuTTY (any development tool with COM port interfacing) test software programs.
Download Datasheet Product Details
Vector Network Analyzer
2-Port USB Controlled VNA from 300 kHz to 6.5 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The M5065 from Copper Mountain Technologies is a 2-port metrology-grade Vector Network Analyzer that operates from 300 kHz to 6.5 GHz. It is available in an economical package that excludes a number of advanced features like vector mixer calibration, TRL calibration, frequency offset, time domain, and gating.
Download Datasheet Product Details
Vector Network Analyzer
6 GHz Low Cost, High Performance USB-controlled VNA
Vector Network Analyzer  from Pico Technology

The PicoVNA 106 is a 2 Port USB-controlled, laboratory grade vector network analyzer that operates from 300 kHz to 6 GHz. This compact, low cost, high-performance VNA has a "Quad RX" four-receiver architecture to eliminate errors, delays and fragility of three-receiver designs with internal transfer switches.
Download Datasheet Product Details
Sponsored by HAROGIC Technologies
 
 
Frequency Counter
Dual-Channel Frequency Analyzer from 400 MHz to 24 GHz
Frequency Counter  from Pendulum Instruments

The CNT-102 from Pendulum Instruments is a Dual-Channel Frequency Analyzer that operates up to 400 MHz (optional RF channel up to 24 GHz available). It is a new affordable model for multi-channel frequency and time-interval analysis in a bench-top unit. This analyzer enables users to track parallel frequency, phase or time simultaneously on two input channels on a large graphic screen and outperforms any competing timer/counter/analyzer on the market.
Download Datasheet Product Details
RF Switch
SP4T, Non-Reflective Solid-State RF Switch from 1 to 26 GHz
RF Switch  from DS Instruments

The SW264K from DS Instruments is a SP4T Solid-State RF Switch that operates from 1 to 26 GHz. It is powered and controlled via a USB type-C interface. The switch has an insertion loss of 5 dB and provides more than 35 dB of isolation. It can handle an RF input power of up to +26 dBm (through) and +22 dBm (hot-switching).
Download Datasheet Product Details
RF Amplifier
Test & Measurement Instrumentation Power Amplifier from 26.5 to 40 GHz
RF Amplifier  from Maury Microwave

The MPA-26G5-40G-100 from Maury Microwave is a GaN Power Amplifier that operates from 26.5 to 40 GHz. It delivers a saturated CW output power of 100 W with a small signal gain of more than 50 dB. This instrumentation amplifier is burn-in, and aging tested for high reliability which includes prolonged storage under extreme temperature conditions, extended amplifier operation over the entire rated temperature range, and elongated usage at maximum power under CW and pulsed-CW conditions.
Download Datasheet Product Details
RF Amplifier
80 W Class A/AB Solid-State Power Amplifier from 18 to 40 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2145D-LC from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 18 to 40 GHz. It delivers a saturated output power of more than 80 W with a gain of over 49 dB. This SSPA is based on Class A/AB linear amplifier design equipped with high power advanced technology that delivers high efficiency.
Download Datasheet Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure Rack Mount from 20 MHz to 12 GHz
RF Shielded Test Enclosure  from RF Electronics

The HDRF-17U3232-A from RF Electronics is a Shielded Test Box that operates from 20 MHz to 12 GHz. It is designed and developed for WLAN (802.11a/b/g/n/ac/ax/be) and wireless device testing (Bluetooth, RFID, 3G, 5G FR1). This test box has an internal clear space dimension of 711 x 761 x 716 mm and includes a thick RF-absorbing foam material that deadens standing waves and reflections.
Download Datasheet Product Details
RF Spectrum Analyzer
Handheld Spectrum Analyzer from 9 kHz to 40 GHz
RF Spectrum Analyzer  from HAROGIC Technologies

The PXN-400 from Harogic is a Handheld Spectrum Analyzer that covers a frequency range of 9 kHz to 40 GHz. It has an SHR architecture and 11-segment pre-selected filters. This spectrum analyzer operates in standard spectrum sweep (SWP), IQ streaming (IQS), (power detection analysis or zero span (DET) and real-time analysis (RTA) working modes.
Download Datasheet Product Details
RF Test Set
7 GHz Wireless Connectivity Test Set for Wi-Fi 7 and Cellular 5G Networks
RF Test Set  from Keysight Technologies

The E7515W from Keysight Technologies is a UXM Wireless Connectivity Test Platform. It has been designed to support Wi-Fi-to-Cellular internetworking testing of both Wi-Fi clients (STAs) and access points (APs) from 380 MHz to 7.125 GHz (frequency resolution of 1 Hz). This test platform adds support for Wi-Fi 7 testing and enables advanced Wi-Fi/cellular co-existence testing and unique testing of 5G fixed wireless access (FWA) devices.
Download Datasheet Product Details
RF Power Meter & Sensor
USB Peak Power Sensor to Characterize Wireless Signals from 50 MHz to 6 GHz
RF Power Meter & Sensor  from Anritsu

The MA244006A from Anritsu is a USB Peak Power Sensor that operates from 50 MHz to 6 GHz. It has a dynamic range from -60 to +20 dBm (average) and -50 to +20 dBm (peak). This power sensor is desgined to meet the challenges of signal measurements and characterization in a complex world of wireless communications.
Download Datasheet Product Details
Antenna Measurement System
Compact Anechoic Chamber for mmWave 5G and Radar Applications
Antenna Measurement System  from Milliwave Silicon Solutions

The MBX33-G4-380 from MilliBox is a compact anechoic chamber test setup that fits on a lab bench. The combination of the MBX33 (chamber) with GIM04-380 (antenna positioner) gives 2m of Far-Field distance, 50cm on the internal cavity, and a 3-Axis mmWave 3D antenna positioner supporting a DUT width of 38cm.
Download Datasheet Product Details
Signal Generator
Miniature Signal Generator from 10 MHz to 15 GHz
Signal Generator  from Atlantic Microwave

The SG15-840002 from ETL Systems is a Miniature Signal Generator that operates from 10 to 15000 MHz covering L, S, and C frequency bands. It delivers an output power up to 13 dBm in 0.5 dB steps and has a frequency step size of 1 to 10 Hz. This signal generator has spurious levels of less than -70 dBc and harmonics of -25 dBc with a phase noise of less than -120 dBc/Hz (@100 KHz offset).
Download Datasheet Product Details
Vector Network Analyzer Extender
D-band VNA Frequency Extension Module from 110 to 170 GHz
Vector Network Analyzer Extender  from AT Microwave

The AT-VEX-06 from AT Microwave is a VNA Frequency Extension Module that operates from 110 to 170 GHz (D-band). It has an input RF/LO frequency range of 9.17 to 14.17 GHz and with a 12x multiplier. This extension module delivers a Tx RF output power of -5 dBm and can handle an RF source input power of +6 dBm.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]