| New RF and Microwave Products this Week . |
|
|
| 16-Port Vector Network Analyzer from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SN5090-16 from Copper Mountain Technologies is a 16-Port Vector Network Analyzer that operates from 300 kHz to 9 GHz. This VNA is an organic extension of the Compact VNA solutions offered by CMT. It enables the full complexity of VNA measurements, a streamlined calibration process, and reduced test times. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 GHz Multiport Contact for Military Avionics and EW Applications | |
RF Connector
from Times Microwave Systems
|
| The M8M™ Multiport Contact from Times Microwaves System that operates up to 40 GHz. It is designed for advanced military avionics and electronic warfare (EW) applications that require extremely restricted space constraints and rising operating frequencies. This contact has a unique construction and is ideal for high-vibration and harsh environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged, Surface Mount Broadband Conical Inductors | |
RF Inductor
from Coilcraft
|
| The BCR Series are conical inductors available in nine inductance values ranging from 0.22 to 8.0 uH. They have been designed specifically for broadband and high-frequency applications from 10 MHz to 40 GHz. The inductors are ideal for use in ultra-wideband bias tees, where the conical inductor provides the path for the DC bias injection or extraction while isolating the power source from the active device. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 V Kelvin Bias Tee from 50 kHz to 50 GHz | |
Bias Tee
from HYPERLABS
|
| The HL8445 from Hyperlabs is a Kelvin Bias Tee that operates from 50 kHz to 50 GHz. It has a DC breakdown voltage of up to 30 V and a breakdown current of 175 mA. The bias tee has an insertion loss of less than 1.75 dB and a rise time of 7 ps. It has an amplitude match of ±0.2 dB and a phase match of ±4°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 - 10 GHz , Programmable, USB-compatible, Synthesized Signal Generators | |
Signal Generator
from Vaunix
|
| The Lab Brick LMS-103 is a USB-compatible, synthesized signal generator that operates from 5 to 10 GHz and can generate a signal with an output power of up to 10 dBm. This USB Signal Generator has a low noise level, a fast 100-microsecond switching time and fine 100 Hz frequency resolution. It can be used with any PC or laptop computer with USB 2.0 port (or powered USB hub) and Windows 2000, XP, Vista, or Windows 7 operating system. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 GHz Wi-Fi 7 Front-End Module for IoT Applications | |
Front End Module
from Qorvo
|
| The QPF4659 from Qorvo is a Wi-Fi 7 Front-End Module (FEM) that operates from 5.925 to 7.125 GHz. It consists of a power amplifier (PA), single-pole double-throw (SP2T) switch, low noise amplifier (LNA), broad range, constant slope voltage logarithmic power detector, and an RF coupler. This FEM is matched to 50 ohms and has a compact form factor that minimizes the layout area in the application. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by dB Control | | New GaN Pulsed Power Amplifier | | The dB-8048 GaN Solid State Power Amplifier functions within the 2.9 to 3.3 GHz frequency range, providing a peak output power of 1500 Watts during pulsed operation. Specifically engineered for demanding MIL-STD applications, the dB-8048 prioritizes reliability and ruggedness to ensure optimal system performance. Its compact modular design and scalable architecture facilitate phase combining, enabling output power scaling up to 6 and 10 kW. Click here to learn more. | | | |
|
|
| Solid State Power Amplifier from 1.0 to 2.0 GHz | |
RF Amplifier
from Advanced Amplifiers
|
| The AA-12G-8KWP from Advanced Amplifiers is a Solid State Power Amplifier that operates from 1.0 to 2.0 GHz. It delivers a peak pulse output power of 9.0 KW and a power gain of more than 69 dB. This class AB linear amplifier provides instantaneous L-Band octave bandwidth and has an input return loss of less than -10 dB. It has harmonics of less than -20 dBc and spurious of less than -60 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 W GaN Asymmetric Doherty Power Transistor from 2620 to 2690 MHz | |
RF Transistor
from Ampleon
|
| The C4H27P400A from Ampleon is a GaN Asymmetric Doherty Power Transistor that operates from 2620 to 2690 MHz. It delivers an output power of 400 W with a gain of 14 dB and a drain efficiency of 58%. This transistor provides excellent digital pre-distortion capability with high efficiency. It has lower output capacitance for improved performance in Doherty applications and is internally matched to 50 Ohms for ease of use. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 W Class A/AB Solid-State Power Amplifier from 18 to 40 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2145C-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 40 GHz. It delivers a saturated output power of more than 40 W with more than 47 dB of gain and has a gain adjustment range of 20 dB. This amplifier is based on Class A/AB linear design integrating high-power advanced features that offer instantaneous wide bandwidth in a small form-factor. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive Radar Simulation Software | |
Software
from Remcom
|
| Remcom’s ray-tracing simulation software, WaveFarer, augments repeatable track tests and drive scenarios. Simulating raw radar returns from a set of scenarios allows engineers to gain insight into a design, placement, or target identification algorithm without the overhead required to install prototypes and take measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 W, Coaxial Fixed Attenuator from DC to 4 GHz | |
Fixed Attenuator
from JFW Industries
|
| The 50FHAO-XXX-200-4 is a fixed attenuator from JFW Industries that operates from DC to 4 GHz. It is available in attenuation values of 30 or 40 dB and has a VSWR of less than 1.40:1. The attenuator can handle up to 200 watts of average power and a peak power of up to 1000 watts. It is available with 4.3/10.0, N, SMA or TNC connector options. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Way Power Divider/Combiner from 0.5 to 8 GHz | |
Power Divider
from MECA
|
| The 804-4-4.250 from MECA is a 4-Way Power Divider/Combiner that operates from 0.5 to 8 GHz. It can handle an input power of up to 30 W, provides more than 16 dB of isolation and has an insertion loss of less than 2.8 dB. This power divider/combiner has a VSWR of 1.20:1, an amplitude balance of ±0.6 dB and a phase balance of less than ±12°. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by dB Control | | New Fast-tuning Microwave Frequency Synthesizer with Best Phase Noise Performance | | The dB-9006 Magnum Opus is an advanced synthesized signal source designed for precision, covering frequencies from 100 MHz to 27 GHz with exceptional phase noise performance. This microwave synthesizer accommodates three interfaces: a 4-wire SPI interface, along with two SCPI interfaces compatible with either RS-232 or USB. It achieves rapid tuning speeds of less than 50 microseconds via the SPI port. Additionally, it features a secondary output that spans from 1 to 2000 MHz, offering both standard 1 Hz resolution and a high-resolution mode down to 1 mHz. Click here to learn more. | | | |
|
|
| Handheld Spectrum Analyzer from 9 kHz to 40 GHz | |
RF Spectrum Analyzer
from HAROGIC Technologies
|
| The PXN-400 from Harogic is a Handheld Spectrum Analyzer that covers a frequency range of 9 kHz to 40 GHz. It has an SHR architecture and 11-segment pre-selected filters. This spectrum analyzer operates in standard spectrum sweep (SWP), IQ streaming (IQS), (power detection analysis or zero span (DET) and real-time analysis (RTA) working modes. |
| |
Download Datasheet
Product Details | |
|
|
|
| GaAs Low Noise Amplifier from 2 to 5 GHz | |
RF Amplifier
from Teledyne e2v HiRel Electronics
|
| The TDLNA2050EP from Teledyne e2v HiRel Electronics is a Low Noise Amplifier (LNA) that operates from 2 to 5 GHz. It provides more than 13 dB of gain with a noise figure of 1.5 dB and has an output P1dB of 12 dBm. This LNA is a high-frequency version of TDLNA0430SEP, which is a broadband, ultra-low noise amplifier. |
| |
Download Datasheet
Product Details | |
|
|
|
| 17 dB Microstrip Isolator from 19.20 to 23.20 GHz | |
RF & Microwave Isolator
from UIY Inc.
|
| The UIYMI45A192T232 from UIY is a Microstrip Isolator that operates from 19.20 to 23.2 GHz. It provides an isolation of more than 17 dB and an insertion loss less than 0.6 dB. This isolator can handle an average forward and reverse power of 2 W, and a peak power of of 10 W with a VSWR of 1.30:1. It is available in a surface mount package that measures 4.5 x 5.5 x 0.7 mm and can operate over a temperature of –55 to 85 °C. |
| |
Download Datasheet
Product Details | |
|
|
|
| Modular THz Signal Frequency Extender from 220 to 330 GHz | |
Signal Generator Extender
from ACST GmbH
|
| The 1219E-18A from ACST GmbH is a THz Signal Frequency Extender that upconverts input frequencies from 12.22 - 18.33 GHz to 220 - 330 GHz (multiplication factor of 18). This extender has a modular design that allows users to have access to more than one band by combining multiple standard extenders. It delivers an output power of 4 dBm and has a mechanically-driven variable attenuator to control the output power. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual Chamber RF Shielded Box from 20 MHz to 6 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-D1260 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz (options up to 60 GHz are available). This shielded box has a dual chamber design that allows parallel testing of multiple DUTs. It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 2.4 GHz in each chamber. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15 dB Coaxial Isolator from 28 to 37 GHz | |
RF & Microwave Isolator
from Renaissance Electronics Corporation
|
| The 2A9NPA-S from Renaissance Electronics & Communications is a Coaxial Isolator that operates from 28 to 37 GHz. It provides an isolation of 15 dB and has an insertion loss of 1.0 dB. This isolator can handle up to 25 W of average power and a peak power of 100 W with a VSWR of 1.50:1. It is available in a module that measures 0.58 x 0.50 x 0.39 inches and is ideal for satellite communication links, space/aerospace, and 5G MIMO applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 0.5 W Surface Mount AlN Chip Termination from DC to 81 GHz | |
Termination
from TTM Technologies
|
| The XMWT80L1G from TTM Technologies is a SMT Chip Termination that operates from DC to 81 GHz. It can handle an input power of up to 0.5 W with a VSWR of 1.67:1 and has a peak-to-average ratio of 12 dB. This termination has a thick film resistive element and an AlN ceramic substrate. It is available in a surface mount flip-chip package that measures 0.060 x 0.030 x 0.013 inches. |
| |
Download Datasheet
Product Details | |
|
|
|
| 14.5 GHz CMOS Ultra-Efficient Power Amplifier for SATCOM Applications | |
RF Amplifier
from Falcomm
|
| The FCM1401 from Falcomm is a Dual-stage CMOS Power Amplifier with a center frequency of 14.5 GHz. It is based on the proprietary ultra-efficient Dual-Drive™ architecture developed by Falcomm and is implemented using the GlobalFoundries 130NSX1 process. This technology provides significant advantages, including exceptional performance, improved energy efficiency, and reduced thermal management costs. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8 W GaN Power Amplifier from 27.5 to 31 GHz | |
RF Amplifier
from Nxbeam Inc
|
| The NPA2050-SM from Nxbeam is a GaN Power Amplifier (PA) that operates in the Ka-Band from 27.5 to 31 GHz. It delivers a saturated output power of 8 W with a gain of 23 dB and a power-added efficiency (PAE) of 28%. This PA requires a DC supply from 20 to 28 V and consumes less than 140 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3-Stage GaAs Power Amplifier MMIC from 17.2 to 21.3 GHz | |
RF Amplifier
from United Monolithic Semiconductors
|
| The CHA4252-QKB from United Monolithic Semiconductors is a 3-Stage GaAs Power Amplifier MMIC that operates from 27.5 to 30 GHz. It delivers a saturated output power of 25 dBm (~0.316 W) with a linear gain of 30 dB and a power-added efficiency (PAE) of 30%. The amplifier requires a DC supply of 10 to 18 V and consumes 80 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
