| New 5G Products . |
|
|
|
|
|
|
|
| 4 Channel System-in-Package Phased Array Module for 5G NR n257 Band | |
Beamforming IC
from ED2 Corp
|
| The F5288 from ED2 Corp is a System-in-Package (SiP) Phased Array Module (PAM) that operates at 28 GHz in the 5G NR n257 band. It consists of 2 x 2 radiating elements and incorporates the Renesas F5288 beamforming half-duplex transceiver. This 4-channel phased array module delivers high linear output power for 5G NR waveforms on the Tx side and features a low noise figure with low power consumption on the Rx side. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| SP4T Switch from 10 MHz to 8 GHz for 5G mMIMO Applications | |
RF Switch
from pSemi, A Murata Company
|
| The PE42447 from pSemi is an SP4T RF Switch that operates from 10 MHz to 8 GHz. It has an insertion loss of less than 0.5 dB with an IIP3 of 85 dBm. This switch can handle an input power of 100 W and has a switching time of 1 microsecond. It is manufactured on pSemi’s patented UltraCMOS process and the combination of high-power handling, high linearity, and extremely low insertion loss makes this switch suitable for hybrid beamforming in wireless infrastructure. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 3GPP Rel-17 5G RedCap Modules for IoT Applications | |
Cellular Module
from Quectel
|
| The RG255G Series from Quectel are 5G RedCap Modules. They are based on the 3GPP Release 17-compliant RedCap technology and support both LTE Cat 4 and 5G Sub-6 GHz standalone (SA) modes, providing efficient 4G/5G global coverage. These modules are backward compatible with Release 15 and 16 networks and partial compatibility with Quectel’s 4G EG2x/EC2x series 4G modules with smaller sizes. |
| |
Download Datasheet |
Product Details | |
|
|
| Featured Interview | | Interview with Anouk Hubrechsen from ANTENNEX | | everything RF recently interviewed Anouk Hubrechsen who is the CEO of ANTENNEX B.V., a company that develops and sells antenna measurement systems for integrated antennas. She obtained her PhD and MSc degrees in 2023 and 2019, respectively, from the Eindhoven University of Technology, Eindhoven, The Netherlands, where she is now a guest researcher. Her research is focused on antenna measurements in reverberation chambers. Click here to read more. | | | |
|
|
| 10 Gbps 5G mmWave Antenna Module for Global Bands | |
Front End Module
from Qualcomm
|
| The QTM565 from Qualcomm is a 5G mmWave Antenna Module that supports global frequency bands: 24-29.5 GHz and 37-43.5 GHz. It delivers peak download speeds of up to 10 Gbps and supports up to 1000 MHz of bandwidth. This module is based on Qualcomm’s 5G modem-RF systems (Snapdragon X75, Snapdragon X72) and supports 1st converged 5G sub-6 GHz and mmWave architecture, Qualcomm 5G PowerSave Gen 4 and Qualcomm SmartTransmit Gen 4 technology. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 3GPP Rel-17 Compliant 5G RedCap Sub-6GHz Module for IoT Applications | |
Cellular Module
from Fibocom
|
| The FG132 from Fibocom is a 5G RedCap Sub-6GHz Module compliant with 3GPP Rel-17 standards. This module supports 5G SA networks, is backward compatible with 4G, and also caters to 5G private networks and slicing requirements. It delivers a downlink data rate of up to 226 Mbps and an uplink data rate of 121 Mbps. It supports OpenWRT, VoLTE & VoNR features and offers optional GNSS capability. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 3-Way In-line Power Splitter/Combiner from 617 to 4200 MHz | |
Power Divider
from Microlab
|
| The D3-76FE from Microlab is a 3-way In-line Power Splitter/Combiner that operates from 617 to 5925 MHz. This splitter can handle an average power of 50 W as a splitter and 0.2 W as a combiner and can handle a peak power of 1 kW. It provides more than 18 dB of isolation, an insertion loss of less than 1.3 dB and has a PIM of -153 dBc (tested with 2x1900MHz, +43 dBm tones). |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| 4 W GaN Power Amplifier MMIC from 27.5 to 30 GHz | |
RF Amplifier
from United Monolithic Semiconductors
|
| The CHA6354-QQA from United Monolithic Semiconductors is a 3-Stage GaN Power Amplifier MMIC that operates from 27.5 to 30 GHz. It delivers a saturated output power of 4 W (~36 dBm) with a gain of 27 dB and a power-added efficiency (PAE) of 17%. This PA is manufactured on a robust GaN-on-SiC HEMT technology and offers high linearity with low power consumption. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 5 W GaN Power Amplifier MMIC from 24.25 to 26.5 GHz | |
RF Amplifier
from Qorvo
|
| The QPA0524 from Qorvo is a Ku-Band GaN Power Amplifier MMIC that operates from 24.25 to 26.5 GHz. It delivers an output power of 37 dBm (~5 W) with a small signal gain of 23 dB and a power-added efficiency of 23%. This amplifier provides linear power of 26 dBm (~400 mW) with an ACPR of -30 dBc at 802.11ac 160 MHz MCS. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 87 W Doherty Power Amplifier from 3400 to 3600 MHz | |
RF Amplifier
from NXP Semiconductors
|
| The A5M35TG040-TC from NXP Semiconductors is a Doherty Power Amplifier that operates from 3400 to 3600 MHz. It is a 2-stage module that includes an LDMOS integrated circuit as a driver and a GaN final stage amplifier. The amplifier delivers a Pulsed CW power of 49.4 dBm(~87 W) with a gain of 30.5 dB and a power-added efficiency of 47.5%. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Integrated Front-End Module for 4G LTE/5G NR Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58281-21 from Skyworks Solutions is a Front-End Module (FEM) for 4G LTE and 5G NR applications. It consists of an integrated power amplifier (PA), single-ended filters, band select switches, low noise amplifiers (LNA), aMIPI standard digital control block, and an antenna. This FEM utilizes an enhanced architecture that covers multiple bands and meets the spectral linearity and EVM requirements of CP-OFDM and DFTS-OFDM modulations up to 256-QAM. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| Rel-16 5G Modules with 4G/3G/2G Fallback for Automotive Applications | |
Cellular Module
from Rolling Wireless
|
| The RN94xx from Rolling Wireless are 5G Modules with 4G (LTE Cat19)/3G/2G fallback designed for automotive applications. These modules are tested to the automotive industry’s toughest specifications. They provide a host of enhancements for automotive applications, including support for 5G Release-16, a high-performance multicore application processor, an integrated hardware engine for security features, and ASIL safety support. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Dual 2T2R and 4T4R Wi-Fi enabled 5G Outdoor Small Cell Access Point | |
Microwave Backhaul Radio Links
from BLiNQ Networks
|
| The PCW-400 Series from BlinQ are CBRS radios that operate in the 5G n48, n77, and n78 bands. They have a channel bandwidth of 10 to 100 MHz and support two 2x2 MIMO configurations (180° coverage). These outdoor radios comply with 3GPP Release 16 and support triband 2T2R WiFi 6E/7 access points. They have an aggregated throughput of up to 4 Gbps (Wi-Fi) and 3 Gbps (5GNR) and provide a gain of 10 dBi for all bands. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Double Ridged Horn Antenna from 5 to 32 GHz | |
Horn Antenna
from RF SPIN
|
| The DRH0532 from RF Spin is a Double Ridged Horn Antenna that operates from 5 to 32 GHz. This linearly polarized antenna has an antenna factor from 36 to 41 dB/m and delivers a CW power of 100 W. It provides a peak power of 170 W with a VSWR of 1.50:1. The DRH0532 is manufactured with RF SPIN’s SPM Technology to achieve exceptional mechanical and radio parameters. |
| |
Download Datasheet |
Product Details | |
|
